Advertisement

Arabian Journal for Science and Engineering

, Volume 44, Issue 2, pp 935–947 | Cite as

Trajectory Tracking of 3D Hybrid Manipulator Through Human Hand Motion

  • R. Arora
  • T. K. BeraEmail author
Research Article - Mechanical Engineering
  • 31 Downloads

Abstract

Generally, industrial manipulators have parallel architecture but these are not generally used because of small workspace as compared to serial manipulators. The drawbacks of serial manipulators are their low accuracy and less load carrying capacity. Therefore, hybrid manipulators are considered to be useful because they are combination of serial and parallel manipulators. In this paper, a three-dimensional hybrid manipulator with two parallel manipulators serially connected to each other is proposed. The forward and inverse dynamics of the system is modelled with the help of bond graph. Thumb and index finger of a human right hand are considered as hybrid manipulators in this paper. The objective of present work is to track the trajectory by thumb in three-dimensional space while drawing an arc on a white board with the help of a marker pen. At the end, the simulation results and conclusions are given to prove that the response follows the command with negligible error. Hence, this type of hybrid manipulator is suitable to be used in multi-fingered robotic grippers, pick and place operations, moving things etc.

Keywords

Human hand 3-D hybrid manipulator Trajectory tracking Overwhelming control Bond graph Dynamics 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Kourosh, E.Z.: Kinematics of manipulators with parallelism, modularity and redundancy: analysis and design. Ph.D. dissertation, Montreal, Quebec, Canada (1995)Google Scholar
  2. 2.
    Ramadan, A.A.; Inoue, K.; Arai, T.; Takubo, T.; Hatta, I.: Micro-nano two-fingered hybrid manipulator hand. In: International Symposium on Micro-Nano Mechatronics and Human Sciences. pp. 32–377 (2007)Google Scholar
  3. 3.
    Ahmed, A.R.; Takubo, T.; Mae, Y.; Oohara, K.; Arai, K.: Developmental process of a chopstick-like hybrid-structure: two fingered micromanipulator hand for 3-D manipulation of microscopic objects. IEEE Trans. Ind. Electron. 56(4), 1121–1135 (2009)CrossRefGoogle Scholar
  4. 4.
    Arora, R.; Bera, T.K.: A bond graph model for object grasping and fingertip motion. In: International Conference on Aeronautical, Robotics and Manufacturing Engineering ARME Proceedings, pp. 87–94 (2015)Google Scholar
  5. 5.
    Khurshid, A.; Ghafoor, A.; Malik Afzaal, M.: Robotic grasping and fine manipulation using soft fingertip. In: Advances in Mechatronics, pp. 155–174 (2011)Google Scholar
  6. 6.
    Vaz, A.; Singh, K.: A bond graph model for the extensor mechanism of human finger. In: 14th National Conference on Machines and Mechanisms NaCoMM Proceedings, pp. 139–145 (2009)Google Scholar
  7. 7.
    Vaz, A.; Hirai, S.: Modeling a hand prosthesis with word bond graph objects. In: The International Conference on Integrated Modeling & Analysis in Applied Control & Automation, Genoa, Italy (2004)Google Scholar
  8. 8.
    Peerdeman, B.; Boere, D.; Kallenberg, L.; Stramigioli, S.; Misra, S.: A biomechanical model for the development of myoelectric hand prosthesis control systems. In: 32nd Annual International Conference of the IEEE EMBS Buenos Aires, pp. 519–523 (2010)Google Scholar
  9. 9.
    Lin, J.; Wu, Y.; Huang, S.T.: Modeling the constraints of human hand motion. In: Proceedings of the Workshop on the Human Motion (IEEE Computer Society Washington, DC, USA), p. 121 (2000)Google Scholar
  10. 10.
    Zaki, S.A.: Modelling and experimental vibration control of a two link three dimensional manipulator with flexible links. Ph.D. dissertation, London, Ontario (1994)Google Scholar
  11. 11.
    Mohamed, H.A.F.; Yahya, S.; Moghavvemi, M.; Yang, S.S.: A new inverse kinematics method for three dimensional redundant manipulators. In: ICROS-SICE International Joint Conference, pp. 1557–1562 (2009)Google Scholar
  12. 12.
    Yahya, S.; Moghavvemi, M.; Almurib, H.A.F.: Joint torque reduction of a three dimensional redundant planar manipulator. Sensors 12, 6869–6892 (2012)CrossRefGoogle Scholar
  13. 13.
    Zhang, Y.; Liu, J.; Wei, He: Vibration control of a non linear three dimensional flexible manipulator trajectory tracking. Int. J. Control 89(8), 1641–1663 (2016)CrossRefzbMATHGoogle Scholar
  14. 14.
    Bera, T.K.; Merzouki, R.; Bouamama, B.O.; Samantaray, A.K.: Force control in a parallel manipulator through virtual foundations. J. Syst. Control Eng. 226(8), 1088–1106 (2012)Google Scholar
  15. 15.
    Arora, R.; Bera, T.K.: Trajectory tracking through overwhelming control of human vertebrae as hybrid manipulator. Simulation 93(3), 251–263 (2017)CrossRefGoogle Scholar
  16. 16.
    Arora, R.; Bera, T.K.: Physical model reduction of a parallel and hybrid manipulator using eigen value sensisitivity method. Iran. J. Sci. Technol. Trans. Mech. Eng. 42(2), 137–147 (2018)CrossRefGoogle Scholar
  17. 17.
    Szufnarowski, F.: Stewart Platform with fixed rotary actuators: a low cost design study. In: Advances in Medical Robotics. Chapter 4, 1st edn. Uniwersytet Rzeszowski, Rzeszow (2013)Google Scholar
  18. 18.
    Mukherjee, A.; Karmakar, R.; Samantaray, A.K.: Bond Graph in Modeling, Simulation and Fault Identification. CRC Press, Boca Raton (2006)Google Scholar
  19. 19.
    Granda, J.J.: The role of bond graph modeling and simulation in mechatronics systems: an integrated software tool: Camp-G, Matlab-Simulink. Mechatronics 12, 1271–1295 (2002)CrossRefGoogle Scholar
  20. 20.
    Samantary, A.K.; Belkacem, B.O.: Model Based Process Supervision. Springer, London (2008)Google Scholar
  21. 21.
    Dauphin-Tanguy, G.; Rahmani, A.; Sueur, C.: Bond graph aided design of controlled systems. Simul. Modell. Pract. Theory 7, 493–513 (1999)CrossRefGoogle Scholar
  22. 22.
    Karnopp, D.C.; Margolis, D.L.; Rosenberg, R.C.: System Dynamics, Modeling and Simulation of Mechatronic Systems. Wiley, New York (2000)Google Scholar
  23. 23.
    Borutzky, W.: Bond Graphs: A Methodology for Modelling Multidisciplinary Dynamic Systems. SCS Publishing House, Erlangen (2004)Google Scholar
  24. 24.
    Bera, T.K.; Bhattacharya, K.; Samantaray, A.K.: Evaluation of antilock braking system with an integrated model of full system dynamics. Simul. Model. Pract. Theory 19, 2131–2150 (2011)CrossRefGoogle Scholar

Copyright information

© King Fahd University of Petroleum & Minerals 2018

Authors and Affiliations

  1. 1.Mechanical Engineering DepartmentThapar Institute of Engineering and TechnologyPatialaIndia
  2. 2.Thapar Institute of Engineering and Technology (Deemed University) (Earlier-Thapar University)PatialaIndia

Personalised recommendations