Bearing Capacity of Strip Footing on Clay Slope Reinforced with Stone Columns
- 11 Downloads
Bearing capacity is very important in geotechnical engineering, which depends on factors such as footing shape, stress distribution under footing and failure mechanism of soil. One of the methods for improving the bearing capacity and reducing settlement in soft and fine soils is adding column like elements to soil which called stone column. In this research using model tests and numerical modeling, the effect of existence and location of stone column on bearing capacity of strip footing near soft clay slope is studied. In fact, reinforced and unreinforced stone columns in different locations are added to slope and the effect of them on load-settlement behavior of strip footing rested on top of the slope was investigated. Group stone columns are also studied, and efficiency of them is investigated. Also numerical modeling is carried out with Plaxis 3D Foundation program, and finally the results of experimental and numerical modeling were compared. Results show that reinforcing clay slope with stone column in all situations leads to increase in bearing capacity of strip footing. Moreover, reinforcing stone columns with encasing cause better performance of stone columns and increase in bearing capacity of footing compared with the same unreinforced stone columns. The maximum effect of stone column on bearing capacity of strip footing occurs when the stone column is located beneath the footing, and with increase in distance between the column and footing, the bearing capacity of footing is decreased.
KeywordsStone column Bearing capacity Strip footing Slope Clay
Unable to display preview. Download preview PDF.
- 1.Barksdale, R.; Bachus, R.: Design and Construction of Stone Columns. Federal Highway Administration, Washington (1983)Google Scholar
- 2.Ambily, A.P.; Gandhi, S.R.: Behavior of stone columns based on experimental and FEM analysis. J. Geotech. Geoenviron. Eng. 133(4), 405–415 (2007). https://doi.org/10.1061/(ASCE)1090-0241(2007)133:4(405) CrossRefGoogle Scholar
- 7.Malarvizhi, S.; Ilamparuthi, K.: Load versus settlement of clay bed stabilized with stone and reinforced stone columns. In: Proceedingns of GeoAsia–2004, Seoul, Korea, pp. 322–329 (2004)Google Scholar
- 8.Black, J.A.; Sivakumar, V.; Madhav, M.R.; Hamill, G.A.: Reinforced stone columns in weak deposits: laboratory model study. J. Geotech. Geoenviron. Eng. 133(9), 1154–1161 (2007). https://doi.org/10.1061/(ASCE)1090-0241(2007)133:9(1154) CrossRefGoogle Scholar
- 13.Ali, K.; Shahu, J.; Sharma, K.: Geosynthetic reinforced stone column in soft soils: an experimental and analytical study. In: 9th international symposium on Lowland Technology, Saga, Japan, (2014)Google Scholar
- 20.Goughnour, R.R.; Sung, J.T.; Ramsey, J.S.: Slide correction by stone columns. In: Deep foundation improvements: design, construction, and testing. ASTM International, ASTM STP-1089 (1991)Google Scholar
- 21.Yaeger, S.: Slope stability and methods of increasing the factor of safety. ECI 281a, Department of Civil and Environmental Engineering, University of California, Davis, (2002)Google Scholar
- 22.Ghazavi, M.; Shahmandi, A.: Analytical static stability analysis of slopes reinforced by Stone columns. International Association for Computer Methods and Advances in Geomechanics (IACMAG), India, pp. 3530–3537 (2008)Google Scholar
- 28.American Society for Testing and Materials,. ASTM, American Society for Testing (1984)Google Scholar