Advertisement

Journal of Civil Structural Health Monitoring

, Volume 9, Issue 1, pp 103–115 | Cite as

Developing an energy-efficient and low-delay wake-up wireless sensor network-based structural health monitoring system using on-site earthquake early warning system and wake-on radio

  • Shih Lin HungEmail author
  • Jiun Ting Ding
  • Yung Chi Lu
Original Paper
  • 65 Downloads

Abstract

The stability and durability of the energy supply for sensing nodes in a wireless sensors network (WSN) is an important research issue and requiring improvement for WSNs in structural health monitoring (SHM) systems. Having control sensors periodically enter a low-power mode or sleep state is commonly used to reduce energy consumption. If a node receives a sampling command but the node remains in listening-time cycle, the sampling process will be delayed. Hence, the capabilities of radio triggering can improve stability and durability when integrated with an external low-power circuit attached to sensing nodes. Transmitting a wake-up command when specific start-up conditions are met to quickly awaken sensing nodes to work wirelessly is also an effective approach. The objective of this work is to integrate sensing field-type p-wave technology to construct an intelligent energy economical WSN with sentry nodes embedded with an earthquake early warning (EEW) system. Sentry nodes are integrated with WSN gateways and employed to link and synchronize all sensing nodes in advance through seismic prediction and radio-triggering technology. In this mode, the average power consumed was measured at 350 μA. A sensor will be more effective in measuring structural responses after an earthquake by increasing available sleep time.

Keywords

Structural health monitoring (SHM) Wireless sensor network (WSN) Wake-on-radio (WOR) Earthquake early warning (EEW) Wake-up delay 

Notes

Acknowledgements

The authors would like to thank the Ministry of Science and Technology (former National Science Council) of the Republic of China, Taiwan, for financially supporting this research under Contract No. NSC 103-2625-M-009-003 and MOST 104-2221-E-009-049-MY2.

Compliance with ethical standards

Conflict of interests

The authors declare that there is no conflict of interests regarding the publication of this paper.

References

  1. 1.
    Lynch JP, Loh KJ (2006) A summary review of wireless sensors and sensor networks for structural health monitoring. Shock Vib Dig 38(2):91–128CrossRefGoogle Scholar
  2. 2.
    Jo H, Rice JA, Spencer BF (2010) Development of high-sensitivity accelerometer board for structural health monitoring. In: Sensors and smart structures technologies for civil, mechanical, and aerospace systems, vol 7647 of proceedings of SPIEGoogle Scholar
  3. 3.
    Rice JA, Mechitov KA, Spencer BF, Agha GA (2010) Autonomous smart sensor network for full-scale structural health monitoring. In: Sensors and smart structures technologies for civil, mechanical, and aerospace systems, vol. 7647 of proceedings of SPIEGoogle Scholar
  4. 4.
    Yan S, Ma H, Li P, Song G, Wu J (2017) Development and application of a structural health monitoring system based on wireless smart aggregates. Sensors 17(7):1641CrossRefGoogle Scholar
  5. 5.
    Li H, Jia L, Zhang Y, Liu C, Rong J (2016) Wireless sensor networks of infrastructure health monitoring for high-speed railway. Shock Vib 2016:5194324Google Scholar
  6. 6.
    Lin TK, Hung SL, Huang CS (2012) Detection of damage location using a novel substructure-based frequency response function approach with a wireless sensing system. Int J Struct Stab Dyn 12(4):1250029CrossRefGoogle Scholar
  7. 7.
    Noel AB, Abdaoui A, Elfouly T, Ahmed MH, Badawy A, Shehata MS (2017) Structural health monitoring using wireless sensor networks: a comprehensive survey. IEEE Commun Surv Tutor 19(3):1403–1423CrossRefGoogle Scholar
  8. 8.
    Ho CK, Zhang R (2012) Optimal energy allocation for wireless communications with energy harvesting constraints. IEEE Trans Sig Process 60(9):4808–4818MathSciNetCrossRefzbMATHGoogle Scholar
  9. 9.
    Horiuchi S, Negishi H, Abe K, Kamimura A, Fujinawa Y (2005) An automatic processing system for broadcasting earthquake alarms. Bull Seismol Soc Am 95(2):708–718CrossRefGoogle Scholar
  10. 10.
    Ionescu C, Böse M, Wenzel F, Marmureanu A, Grigore A, Marmureanu G (2007) An early warning system for deep Vrancea (Romania) earthquakes. Earthq Early Warn Syst.  https://doi.org/10.1007/978-3-540-72241-0_17
  11. 11.
    Wu YM, Kanamori H (2005) Experiment on an onsite early warning method for the taiwan early warning system. Bull Seismol Soc Am 95(1):347–353CrossRefGoogle Scholar
  12. 12.
    Kong Q, Allen RM, Schreier L, Kwon Y-W (2016) MyShake: a smartphone seismic network for earthquake early warning and beyond. Sci Adv 2(2):e1501055CrossRefGoogle Scholar
  13. 13.
    Wu YM, Kanamori H (2008) Development of an earthquake early warning system using real-time strong motion signals. Sensors 8:1–9CrossRefGoogle Scholar
  14. 14.
    Wu YM, Lin TL, Chao WA, Huang HH, Hsiao NC, Chang CH (2011) Faster short-distance earthquake early warning using continued monitoring of filtered vertical displacement: a case study for the 2010 Jiasian earthquake, Taiwan. Bull Seismol Soc Am 101(2):701–709CrossRefGoogle Scholar
  15. 15.
    Sun T, Chen L-J, Han C-C, Yang G, Gerla M (2006) Measuring effective capacity of IEEE 802.15.4 beaconless mode. In: IEEE wireless communications and networking conference (WCNC)Google Scholar
  16. 16.
    Huang Y, Pang A, Hung H (2009) A comprehensive analysis of low-power operation for beacon-enabled IEEE 802.15.4 wireless networks. IEEE Trans Wireless Commun 8(11):5601–5611CrossRefGoogle Scholar
  17. 17.
    IEEE, 802.15.4-2006 (2006) IEEE standard part 15.4: low-rate wireless personal area networks (LR-WPANS)Google Scholar
  18. 18.
    Jelicic V, Magno M, Brunelli D, Bilas V, Benini L (2012) Analytic comparison of wake-up receivers for WSNs and benefits over the wake-on radio scheme. In: Proceedings of the 7th ACM workshop on performance monitoring and measurement of heterogeneous wireless and wired networks, pp 99–106Google Scholar
  19. 19.
    Ye W, Heidemann J, Estrin D (2002) An energy-efficient MAC protocol for wireless sensor network. Proceedings IEEE INFOCOM 2002Google Scholar
  20. 20.
    van Dam T, Langendoen K (2003) An adaptive energy efficient mac protocol for wireless sensor networks. In: Proceedings of the 1st international conference on embedded networked sensor systems (SenSys), pp 171–180Google Scholar
  21. 21.
    Polastre J, Hill J, Culler D (2004) Versatile low power media access for wireless sensor networks. In: Proceedings of the 2nd international conference on embedded networked sensor systems (SenSys), pp 95–107Google Scholar
  22. 22.
    Buettner M, Yee G, Anderson E, Han R (2006) X-MAC: a short preamble MAC protocol for duty-cycled wireless sensor networks. In: Proceedings of the 4th international conference on embedded networked sensor systems (SenSys), pp 307–320Google Scholar
  23. 23.
    Lu G, De D, Xu M, Song W-Z, Cao J (2010) TelosW: enabling ultra-low power wake-on sensor network. In: 7th international conference on networked sensing systems (INSS)Google Scholar
  24. 24.
    Dziengel N, Ziegert M, Adler S, Kasmi Z, Pfeiffer S, Schiller J (2011) Energy-aware distributed fence surveillance for wireless sensor networks. In: 7th International conference on intelligent sensors, sensor networks and information processing (ISSNIP)Google Scholar
  25. 25.
    Wittenburg G, Dziengel N, Adler S, Kasmi Z, Ziegert M, Schiller J (2012) Cooperative event detection in wireless sensor networks. IEEE Commun Mag 50(12):124–131CrossRefGoogle Scholar
  26. 26.
    Gordon D, Berning M, Masri RE, Beigl M, Blanckenstein J, Klaue J (2012) WoR-MAC: combining wake-on-radio with quality-of-service for intelligent environments. In: 9th International conference on networked sensing systems (INSS)Google Scholar
  27. 27.
    Vodel M, Caspar M, Hardt W (2012) Wake-up-receiver concepts—capabilities and limitations. J Netw 7(1):126–134Google Scholar
  28. 28.
    van der Doorn B, Kavelaars W, Langendoen K (2009) A prototype low-cost wakeup radio for the 868 MHz band. Int J Sens Netw 5(1):22–32CrossRefGoogle Scholar
  29. 29.
    Gamm GU, Sippel M, Kostic M, Reindl LM (2010) Low power wake-up receiver for wireless sensor nodes. In: 6th International conference on intelligent sensors, sensor networks and information processing (ISSNIP), pp 121–126Google Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Department of Civil EngineeringNational Chiao Tung UniversityHsinchuTaiwan, ROC
  2. 2.Department of Computer Science and Information EngineeringNational Chiao Tung UniversityHsinchuTaiwan, ROC

Personalised recommendations