Dual-Core Photonic Crystal Fiber Plasmonic Refractive Index Sensor: A Numerical Analysis
- 67 Downloads
A numerical analysis on dual core photonic crystal fiber (DC-PCF) based surface plasmon resonance (SPR) refractive index sensor is presented. The guiding parameters and required sensing performances are examined with finite element method (FEM) based software under MATLAB environment. According to simulation, it is warrant that the proposed refractive index sensor offers the maximum amplitude sensitivity of 554.9 refractive index unit (RIU−1) and 636.5 RIU−1 with the maximum wavelength sensitivity of 5800 nm/RIU and 11 500 nm/RIU, and the sensor resolution of 1.72 × 10−5 RIU and 8.7 × 10−6 RIU, at analyte refractive index (RI) of 1.40 for x- and y-polarized modes, respectively. As the sensing performance in different wavelength ranges is quite high, the proposed sensor can be used in simultaneous detection for different wavelength ranges. Therefore, the proposed device is of a suitable platform for detecting biological, chemical, biochemical, and organic chemical analytes.
KeywordsPhotonic crystal fiber biosensor refractive index sensor finite element method plasmonic material
The authors thank Dr. Abdul Khaleque for his valuable discussions and contributions for preparing the manuscript.
- M. Y. Azab, M. F. O. Hameed, A. Heikal, M. A. Swillam, and S. Obayya, “Analysis of highly sensitive surface plasmon photonic crystal fiber biosensor,” SPIE, 2018, 10541: 105411N-1‒105411N-6.Google Scholar
- F. Wang, Z. Sun, C. Liu, T. Sun, and P. K. Chu, “A high-sensitivity photonic crystal fiber (PCF) based on the surface plasmon resonance (SPR) biosensor for detection of density alteration in non-physiological cells (DANCE),” Opto-Electronics Review, 2018, 26(1): 50–56.Google Scholar
- S. M. A. Razzak, Y. Namihira, M. A. Hossain, and A. Khaleque, “Designing birefringence of index-guiding non-hexagonal photonic crystal fibers,” Journal of Optics, 2011, 40(2): 56–64.Google Scholar
- C. Liu, L. Yang, Q. Liu, F. M. Wang, Z. J. Sun, T. Sun, et al., “Analysis of a surface plasmon resonance probe based on photonic crystal fibers for low refractive index detection,” Plasmonics, 2018, 13(3): 779–784.Google Scholar
- S. Chakma, M. A. Khalek, B. K. Paul, K. Ahmed, M. R. Hasan, and A. N. Bahar, “Gold-coated photonic crystal fiber biosensor based on surface plasmon resonance: design and analysis,” Sensing and Bio-Sensing Research, 2018, 18: 7–12.Google Scholar
- A. Khaleque and H. T. Hattori, “Ultra-broadband and compact polarization splitter based on gold filled dual-core photonic crystal fiber,” Journal of Applied Physics, 2015, 118(14): 682–683.Google Scholar
- W. Zhang, S. Q. Lou, and X. Wang, “A polarization filter based on a novel photonic crystal fiber with a gold-coated air hole by using surface plasmon resonance,” Plasmonics, 2018, 13(2): 365–371.Google Scholar
- Y. X. Liu, S. P. Zhan, G. T. Cao, H. Yang, J. Li, Q. Liu, et al., “Theoretical design of plasmonic refractive index sensor based on the fixed band detection,” IEEE Journal of Selected Topics in Quantum Electronics, 2018, 25(2): 1–1.Google Scholar
- F. Wang, Z. Sun, C. Liu, T. Sun, and P. K. Chu, “A highly sensitive dual-core photonic crystal fiber based on a surface plasmon resonance biosensor with silver-graphene layer,” Plasmonics, 2017, 12(6): 1847–1853.Google Scholar
- A. K. Paul, A. K. Sarkar, M. H. Islam, and M. Morshed, “Dual core photonic crystal fiber based surface plasmon resonance biosensor,” Optik–International Journal for Light and Electron Optics, 2018, 170: 400–408.Google Scholar
- G. W. An, S. G. Li, X. Yan, X. N. Zhang, Z. Y. Yuan, and Y. N. Zhang, “High-sensitivity and tunable refractive index sensor based on dual-core photonic crystal fiber,” Journal of the Optical Society of America B, 2016, 33(7): 1330–1334.Google Scholar
- K. Tong, F. C. Wang, M. T. Wang, P. Dang, Y. X. Wang, and J. R. Sun, “D-shaped photonic crystal fiber biosensor based on silver-graphene,” Optik-International Journal for Light and Electron Optics, 2018, 168: 467–474.Google Scholar
- A. Bjarklev, J. Broeng, and A. S. Bjarklev, Fabrication of photonic crystal fibres, photonic crystal fibres. Boston, USA: Springer, 2003: 115–130.Google Scholar
- M. R. Hasan, S. Akter, M. S. Rahman, and K. Ahmed, “Design of a surface plasmon resonance refractive index sensor with high sensitivity,” Optical Engineering, 2017, 56(8): 087101-1‒087101-6.Google Scholar
- S. I. Azzam, M. F. O. Hameed, R. E. A. Shehata, A. Heikal, and S. S. A. Obayya, “Multichannel photonic crystal fiber surface plasmon resonance based sensor,” Optical and Quantum Electronics, 2016, 48(2): 1–11.Google Scholar
- A. E. Khalil, A. H. E. Saeed, M. A. Ibrahim, M. E. Hashish, M. R. Abdelmonem, M. F. O. Hameed, et al., “Highly sensitive photonic crystal fiber biosensor based on titanium nitride,” Optical and Quantum Electronics, 2018, 50(3): 158-1‒158-12.Google Scholar
- M. R. Hasan, S. Akter, A. A. Rifat, S. Rana, and S. Ali, “A highly sensitive gold-coated photonic crystal fiber biosensor based on surface plasmon resonance,” Photonics, 2017, 4(1): 1–11.Google Scholar
- A. K. Paul, A. K. Sarkar, and S. A. Razzak, “Graphene coated photonic crystal fiber biosensor based on surface plasmon resonance,” in Proceeding of 2017 IEEE Region 10 Humanitarian Technology Conference (R10-HTC), Dhaka, Bangladesh, 2017, pp. 856–859.Google Scholar
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.