# Linear Form Finding Approach for Regular and Irregular Single Layer Prism Tensegrity

- 29 Downloads

## Abstract

In an irregular prism tensegrity, the number of force equilibrium equations is less than the number of unknown parameters of nodal coordinates and member force ratios. As a result, the form-finding process normally becomes nonlinear with additional conditions or needs to be carried out with the use of iterative procedures. For cases of irregular prism tensegrity which involves large number of members, it was found that previously proposed methods of form-finding are not practical. Moreover, there is a need for a form-finding approach which is able to cater to different requirements on final configuration. In this paper, the length relation condition is introduced to be used in combination with the force equilibrium equation. With the combined use of length relation and equilibrium conditions, a linear form-finding approach for irregular prism tensegrity was successfully formulated and developed. An easy-to-use interactive form-finding tool has been developed which can be used for form-finding of irregular prism tensegrities with large number of elements as well as under diverse specific requirements on their configurations.

## Keywords

Tensegrity Linear approach Form finding Single layer prism tensegrity Irregular shape## Notes

### Acknowledgements

This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (2016R1A2B4014562).

## References

- Duffy, J., Rooney, J., Knight, B., & Crane, C., III. (2000). A review of a family of self deploying tensegrity structures with elastic ties.
*Shock and Vibration Digest,**32,*100–106.CrossRefGoogle Scholar - Faroughi, S., Kamran, M. A., & Lee, J. (2014). A genetic algorithm approach for 2-D tensegrity form finding.
*Advances in Structural Engineering,**17,*1669–1679.CrossRefGoogle Scholar - Feng, X., & Guo, S. (2015). A novel method of determining the sole configuration of tensegrity structures.
*Mechanics Research Communications,**69,*66–78.CrossRefGoogle Scholar - Fuller, R. B., & Marks, R. (1960).
*The dymaxion world of Buckminster Fuller*. New York: Reinhold Publications.Google Scholar - Knight, B., Zhang, Y., Duffy, J. & Crane, C. (2000). On the line geometry of a class of tensegrity structures. In
*Proceedings of a symposium commemorating the legacy, works and life of Sir Robert Stawell Ball upon 100 Anniversary of A Treatise on the theory of Screws, July 9*–*11, 2000*(pp. 1–29). University of Cambridge.Google Scholar - Koohestani, K. (2015). Reshaping of tensegrities using a geometrical variation approach.
*International Journal of Solids and Structures,**71,*233–243.CrossRefGoogle Scholar - Koohestani, K., & Guest, S. D. (2013). A new approach to the analytical and numerical form-finding of tensegrity structures.
*International Journal of Solids and Structures,**50,*2995–3007.CrossRefGoogle Scholar - Lee, S., Gan, B. S., & Lee, J. (2016). A fully automatic group selection for form-finding process of truncated tetrahedral tensegrity structures via a double-loop genetic algorithm.
*Composites Part B Engineering,**106,*308–315.CrossRefGoogle Scholar - Lee, S., & Lee, J. (2014a). Form-finding of tensegrity structures with arbitrary strut and cable members.
*International Journal of Mechanical Sciences,**85,*55–62.CrossRefGoogle Scholar - Lee, S., & Lee, J. (2014b). Optimum self-stress design of cable–strut structures using frequency constraints.
*International Journal of Mechanical Sciences,**89,*462–469.CrossRefGoogle Scholar - Lee, S., & Lee, J. (2016). A novel method for topology design of tensegrity structures.
*Composite Structures,**152,*11–19.CrossRefGoogle Scholar - Motro, R. (2003).
*Tensegrity: Structural systems for the future*. Netherland: Elsevier.CrossRefGoogle Scholar - Ohsaki, M., & Zhang, J. Y. (2015). Nonlinear programming approach to form-finding and folding analysis of tensegrity structures using fictitious material properties.
*International Journal of Solids and Structures,**69–70,*1–10.CrossRefGoogle Scholar - Pugh, A. (1976).
*An introduction to tensegrity*. Berkeley: University of California Press.Google Scholar - Skelton, R. E., Adhikari, R., Pinaud, J.-P., Chan, W., & Helton, J. (2001). An introduction to the mechanics of tensegrity structures. In
*Proceedings of the 40th IEEE conference on decision and control, 2001*(pp.4254–4259)*. IEEE*.Google Scholar - Snelson, K. (1965).
*Continuous tension, discontinuous compression structures*. United States Patent 3,169,611.Google Scholar - Tibert, G., & Pellegrino, S. (2011). Review of form-finding methods for tensegrity structures.
*International Journal of Space Structures,**26,*241–255.CrossRefGoogle Scholar - Zhang, P., Kawaguchi, K. I., & Feng, J. (2014a). Prismatic tensegrity structures with additional cables: Integral symmetric states of self-stress and cable-controlled reconfiguration procedure.
*International Journal of Solids and Structures,**51,*4294–4306.CrossRefGoogle Scholar - Zhang, L.-Y., Li, Y., Cao, Y.-P., & Feng, X.-Q. (2014b). Stiffness matrix based form-finding method of tensegrity structures.
*Engineering Structures,**58,*36–48.CrossRefGoogle Scholar