Advertisement

Journal of Remanufacturing

, Volume 9, Issue 1, pp 29–50 | Cite as

Marketing research and life cycle pricing strategies for new and remanufactured products

  • Liangchuan Zhou
  • Surendra M. GuptaEmail author
Research

Abstract

Unlike consumer durable goods, high technology products have shorter life cycles. Many companies launch new items at a fast rate of innovation. As a result, the latest products often compete in the same market with earlier-generation products. In addition to brand-new products, used products returned by early-adopting customers still have significant value. Returned products can be restored using the remanufacturing process and offered to other customers. Therefore, multiple generations of new products and remanufactured products can be available side-by-side in the marketplace. New products are affected by technology obsolescence, while the remanufactured products are affected by quality and technology obsolescence. The prices of each product should be adjusted according to the product value and the customer perceived value over time. This research paper discusses pricing considerations for new and remanufactured products across multiple generations. The iPhone is used as an example because it is a high-tech electronic product with a short life cycle. In this study, pricing data of the new and remanufactured products of different generations is extracted from eBay. Factors that influence pricing and interaction among these factors are identified. In addition, price trend functions with the average quality and the technology depreciation rates are proposed.

Keywords

Remanufacturing Pricing Hi-tech product Data analysis 

References

  1. 1.
    Abbey JD, Blackburn JD, Guide VD (2015) Optimal pricing for new and remanufactured products. Oper Manag 36:130–146CrossRefGoogle Scholar
  2. 2.
    Abbey JD, Meloy MG, Blackburn JD, Guide VD (2015) Consumer Markets for Remanufactured and Refurbished Products. Calif Manag Rev 57(4):26–42CrossRefGoogle Scholar
  3. 3.
    Abbey JD, Meloy MG, Guide VD, Atalay S (2015) Remanufactured products in closed-loop supply chains for consumer goods. Prod Oper Manag 24(3):488–503CrossRefGoogle Scholar
  4. 4.
    Agrawal VV, Atasu A, Ittersum KV (2015) Remanufacturing, third-party competition, and Consumers' perceived value of new products. Manag Sci 61(1):60–72CrossRefGoogle Scholar
  5. 5.
    Alqahtani AY, Gupta SM (2017) Warranty as a marketing strategy for remanufactured products. J Clean Prod 161:1294–1307CrossRefGoogle Scholar
  6. 6.
    Arslan H, Kachani S, Shmatov K (2009) Optimal product introduction and life cycle pricing policies for multiple product generations under competition. Revenue and Pricing Management 8(5):438–451CrossRefGoogle Scholar
  7. 7.
    Atasu A, Sarvary M, Van Wassenhove L (2008) Remanufacturing as a marketing strategy. Manag Sci 54(10):1731–1746CrossRefGoogle Scholar
  8. 8.
    Aytac B, Wu SD (2013) Characterization of demand for short life-cycle technology products. Ann Oper Res 203(1):255–277MathSciNetCrossRefzbMATHGoogle Scholar
  9. 9.
    Frota Neto JQ, Bloemhof J, Corbett C (2016) Market prices of remanufactured, used and new items: evidence from eBay. Int J Prod Econ 171:371–380CrossRefGoogle Scholar
  10. 10.
    Gan SS, Pujawan IN (2017) Pricing and warranty level decision for new and remanufactured short life-cycle products. Jurnal Teknik Industri 19(1):39–46Google Scholar
  11. 11.
    Gan SS, Pujawan IN, Suparno (2014) Remanufacturing of short life-cycle products. Operations and Supply Chain Management 7(1):13–22CrossRefGoogle Scholar
  12. 12.
    Gungor A, Gupta SM (1999) Issues in environmentally conscious manufacturing and product recovery: a survey. Comput Ind Eng 36:811–853CrossRefGoogle Scholar
  13. 13.
    Ilgin MA, Gupta SM (2010) Environmentally conscious manufacturing and product recovery (ECMPRO): a review of the state of the art. Environ Manag 91:563–591Google Scholar
  14. 14.
    Koopman R. B., & Laney K. (2012). Remanufactured goods: an overview of the U.S. and Global Industries, Markets, and Trade. U.S. International Trade Commission, Washington DCGoogle Scholar
  15. 15.
    Kumar R, Ramachandran P (2016) Revenue Management in Remanufacturing, perspective, review of current literature and research directions. Int J Prod Res 54(7):2185–2201CrossRefGoogle Scholar
  16. 16.
    Kuo C, Huang K (2012) Dynamic pricing of limited inventories for multi-generation products. Eur J Oper Res 217(2):394–403MathSciNetCrossRefzbMATHGoogle Scholar
  17. 17.
    Li W, Wu H, Deng L (2015) Decision-making based on Consumers' perceived value in different remanufacturing modes. Discret Dyn Nat Soc:1–8Google Scholar
  18. 18.
    Liang C, Cakanyildirim M, Sethi SP (2014) Analysis of product rollover strategies in the presence of strategic customers. Manag Sci 60(4):1033–1056CrossRefGoogle Scholar
  19. 19.
    Lin C-Y, Okukan Kremer GE (2014) Strategic decision making for multiple-generation product lines using dynamic state variable models: the cannibalization case. Comput Ind 65:79–90CrossRefGoogle Scholar
  20. 20.
    Linton JD (2008) Assessing the economic rationality of remanufacturing. Production Innovation Management 25:287–302CrossRefGoogle Scholar
  21. 21.
    Mitra S (2016) Optimal pricing and Core acquisition strategy for a hybrid manufacturing/remanufacturing system. Int J Prod Res 54(5):1285–1302CrossRefGoogle Scholar
  22. 22.
    Ovchinnikov A (2011) Revenue and cost Management for Remanufactured Products. Prod Oper Manag 20(6):824–840CrossRefGoogle Scholar
  23. 23.
    Pang G, Casalin F, Papagiannidis S, Muyldermans L, Tse Y (2015) Pricing determinants for remanufactured electronic products: a case study on eBay UK. Int J Prod Res 53(2):572–589CrossRefGoogle Scholar
  24. 24.
    Seref M, Carrillo JE, Yenipazarli A (2016) Multi-generation pricing and timing decisions in new product development. Int J Prod Res 54(7):1919–1937CrossRefGoogle Scholar
  25. 25.
    Subramanian R, Subramanyam R (2012) Key factors in the market for remanufactured products. Manufacturing & Service Operations Management 14(2):315–326CrossRefGoogle Scholar
  26. 26.
    Thierry M, Salomon M, van Nunen J, van Wassenhove L (1995) Strategic issue in product recovery management. Calif Manag Rev 37(2):114–135CrossRefGoogle Scholar
  27. 27.
    Vadde S., Kamarthi S. V., & Gupta S. M. (2006). Pricing of end-of-life items with obsolescence. IEEE International Symposium on Electronics and the EnvironmentGoogle Scholar
  28. 28.
    Xu X, Munson CL, Zeng S (2017) The impact of E-service offerings on the demand of online customers. Int. J. Production Economics 184:231–244CrossRefGoogle Scholar
  29. 29.
    Xu X, Zeng S, He Y (2017) The influence of E-services on customer online purchasing behavior toward remanufactured products. Int J Production Economics 187:113–125CrossRefGoogle Scholar
  30. 30.
    Wang Y, Hazen BT (2016) Consumer product knowledge and intention to purchase remanufactured product. Int J Prod Econ 181:460–469CrossRefGoogle Scholar
  31. 31.
    Zhou E, Zhang J, Gou Q, Liang L (2015) A two period pricing model for new fashion style launching strategy. Int J Prod Econ 160:144–156CrossRefGoogle Scholar

Copyright information

© Springer Nature B.V. 2018

Authors and Affiliations

  1. 1.Department of Mechanical and Industrial Engineering, College of EngineeringNortheastern UniversityBostonUSA

Personalised recommendations