Advertisement

Development of fully formulated eco-friendly nanolubricant from sesame oil

  • S. SabarinathEmail author
  • Sreenidhi Prabha Rajeev
  • P. K. Rajendra Kumar
  • K. Prabhakaran Nair
Original Article
  • 12 Downloads

Abstract

In the present work, a biodegradable and non-toxic lubricant is formulated from sesame oil (SESO) with viscosity modifiers, antioxidants and antiwear additives. The significance of antiwear additives in SESO blended with antioxidants and viscosity modifiers is evaluated using analysis of variance (ANOVA). The formulated oil is tested for its biodegradability, toxicity, rheological, thermal, tribological and corrosive properties and is compared with commercially available SAE20W40 lubricant. The formulated lubricant is investigated to have better biodegradability, lower toxicity and good thermal properties than SAE20W40. Whereas its pour point, rheological properties, corrosive properties and tribological properties are comparable to that of SAE20W40.

Keywords

Nanolubricant Sesame oil Silicon dioxide Ionic liquid Biodegradable lubricant 

Notes

Acknowledgements

The authors thank Dr. C. K. Subash, SMSE, NIT Calicut, STIC – SAIF Cochin and Deepak G. Dileep, Assistant professor, Mar Baselios College of Engineering and Technology, Trivandrum for technical support provided for this work.

References

  1. Ameen OM, Olatunji G, Atata RF, Usman LA (2011) Antimicrobial activity, cytotoxic test and phytochemical screening of extracts of the stem of Fadogia agrestis. Nigerian Soc Exptal Biol J 11:79-84Google Scholar
  2. ASTM E (2009) 08: Standard test method for oxidation onset temperature of hydrocarbons by differential scanning calorimetry. Annual Book of ASTM StandardsGoogle Scholar
  3. Bart JC, Gucciardi E, Cavallaro S (2012) Biolubricants: science and technology. Elsevier, NetherlandsGoogle Scholar
  4. Bedigian D (2003) Evolution of sesame revisited: domestication, diversity and prospects. Genet Resour Crop Evol 50:779–787CrossRefGoogle Scholar
  5. Bobzin K, Bartels T (2011) Industrial tribology: Tribosystems, friction, wear and surface engineering, lubrication. Wiley, HobokenGoogle Scholar
  6. Brandl H, Gross RA, Lenz RW, Fuller RC (1988) Pseudomonas oleovorans as a source of poly (β-hydroxyalkanoates) for potential applications as biodegradable polyesters. Appl Environ Microbiol 54:1977–1982Google Scholar
  7. Chatra KS, Jayadas N, Kailas SV (2012) Natural oil-based lubricants. Springer, Heidelberg, pp 287–328Google Scholar
  8. Darjani S, Koplik J, Pauchard V (2017) Extracting the equation of state of lattice gases from random sequential adsorption simulations by means of the Gibbs adsorption isotherm. Phys Rev E 96:052803CrossRefGoogle Scholar
  9. Darminesh SP, Sidik NAC, Najafi G, Mamat R, Ken TL, Asako Y (2017) Recent development on biodegradable nanolubricant: a review. Int Commun Heat Mass Transfer 86:159–165CrossRefGoogle Scholar
  10. Eriksson L (2008) Design of experiments: principles and applications. MKS Umetrics AB, SwedenGoogle Scholar
  11. Fox N, Stachowiak G (2007) Vegetable oil-based lubricants—a review of oxidation. Tribol Int 40:1035–1046CrossRefGoogle Scholar
  12. Gerwick WH, Proteau PJ, Nagle DG, Hamel E, Blokhin A, Slate DL (1994) Structure of curacin A, a novel antimitotic, antiproliferative and brine shrimp toxic natural product from the marine cyanobacterium Lyngbya majuscula. J Org Chem 59:1243–1245CrossRefGoogle Scholar
  13. Giddens PH (1947) Pennsylvania petroleum, 1750–1872: a documentary history: drake well memorial park, Pennsylvania Historical and Museum CommissionGoogle Scholar
  14. Gupta RN, Harsha A, Singh S (2018) Tribological study on rapeseed oil with nano-additives in close contact sliding situation. Appl Nanosci 8:567–580CrossRefGoogle Scholar
  15. Jaiswal V, Rastogi R, Kumar D (2017) The investigation of different particle size magnesium-doped zinc oxide (Zn 0.92 Mg 0.08 O) nanoparticles on the lubrication behavior of paraffin oil. Appl Nanosci 7:275–281CrossRefGoogle Scholar
  16. Jayadas N, Nair KP (2006) Coconut oil as base oil for industrial lubricants—evaluation and modification of thermal, oxidative and low temperature properties. Tribol Int 39:873–878CrossRefGoogle Scholar
  17. Koshy CP, Rajendrakumar PK, Thottackkad MV (2015) Evaluation of the tribological and thermo-physical properties of coconut oil added with MoS2 nanoparticles at elevated temperatures. Wear 330:288–308CrossRefGoogle Scholar
  18. Li Z, Zhu Y (2003) Surface-modification of SiO2 nanoparticles with oleic acid. Appl Surf Sci 211:315–320CrossRefGoogle Scholar
  19. Li W, Ivanov S, Mozaffari S, Shanaiah N, Karim AM (2018) Palladium Acetate Trimer: understanding Its Ligand-Induced Dissociation Thermochemistry Using Isothermal Titration Calorimetry, X-ray Absorption Fine Structure, and 31P Nuclear Magnetic Resonance. Organometallics 38:451–460CrossRefGoogle Scholar
  20. López-Beceiro J, Artiaga R, Gracia C, Tarrío-Saavedra J, Naya S, Mier JL (2011) Comparison of olive, corn, soybean and sunflower oils by PDSC. J Therm Anal Calorim 104:169–175CrossRefGoogle Scholar
  21. Minami I (2009) Ionic liquids in tribology. Molecules 14:2286–2305CrossRefGoogle Scholar
  22. Mozaffari S, Tchoukov P, Atias J, Czarnecki J, Nazemifard N (2015) Effect of asphaltene aggregation on rheological properties of diluted athabasca bitumen. Energy Fuels 29:5595–5599CrossRefGoogle Scholar
  23. Mozaffari S, Tchoukov P, Mozaffari A, Atias J, Czarnecki J, Nazemifard N (2017a) Capillary driven flow in nanochannels–Application to heavy oil rheology studies. Colloids Surf A 513:178–187CrossRefGoogle Scholar
  24. Mozaffari S, Li W, Thompson C, Ivanov S, Seifert S, Lee B et al (2017b) Colloidal nanoparticle size control: experimental and kinetic modeling investigation of the ligand–metal binding role in controlling the nucleation and growth kinetics. Nanoscale 9:13772–13785CrossRefGoogle Scholar
  25. Mozaffari S, Li W, Thompson C, Ivanov S, Seifert S, Lee B, Kovarik L, Karim AM (2018) Ligand-mediated nucleation and growth of palladium metal nanoparticles. J Vis Exp 25(136):e57667Google Scholar
  26. Nair SS, Nair KP, Rajendrakumar PK (2017) Evaluation of physicochemical, thermal and tribological properties of sesame oil (Sesamum indicum L.): a potential agricultural crop base stock for eco-friendly industrial lubricants. Int J Agric Res Gov Ecol 13:77–90Google Scholar
  27. Nair SS, Nair KP, Rajendrakumar PK (2018) Micro and nanoparticles blended sesame oil bio-lubricant: study of its tribological and rheological properties. Micro Nano Lett 13:1743–1746CrossRefGoogle Scholar
  28. Quinchia L, Delgado M, Valencia C, Franco J, Gallegos C (2010) Viscosity modification of different vegetable oils with EVA copolymer for lubricant applications. Ind Crops Prod 32:607–612CrossRefGoogle Scholar
  29. Raina A, Anand A (2017) Tribological investigation of diamond nanoparticles for steel/steel contacts in boundary lubrication regime. Appl Nanosci 7:371–388CrossRefGoogle Scholar
  30. Rani S (2017) The evaluation of lubricant properties and environmental effect of bio-lubricant developed from rice bran oil. Int J Surf Sci Eng 11:403–417CrossRefGoogle Scholar
  31. Rao JP, Geckeler KE (2011) Polymer nanoparticles: preparation techniques and size-control parameters. Prog Polym Sci 36:887–913CrossRefGoogle Scholar
  32. Sabarinath S, Prabhakaran Nair K, Rajendrakumar P, Parameswaran P (2018) Styrene butadiene rubber as a viscosity improver: experimental investigations and quantum chemical studies. Proc Inst Mech Eng Part J 232:427–436CrossRefGoogle Scholar
  33. Sabarinath SN, Prabhakaran Nair K, Rajendrakumar PK (2019a) Experimental and quantum chemical investigations on the oxidative stability of sesame oil base stock with synthetic antioxidant additives. Lubr Sci 31(5):179–193CrossRefGoogle Scholar
  34. Sabarinath S, Rajendrakumar PK, Prabhakaran Nair K (2019b) Evaluation of tribological properties of sesame oil as biolubricant with SiO2 nanoparticles and imidazolium-based ionic liquid as hybrid additives. Proc Inst Mech Eng Part J: J Eng Tribol.  https://doi.org/10.1177/1350650119837831 Google Scholar
  35. Schwarzer HC, Peukert W (2004) Combined experimental/numerical study on the precipitation of nanoparticles. AIChE J 50:3234–3247CrossRefGoogle Scholar
  36. Selby T (1958) The non-Newtonian characteristics of lubricating oils. ASLE Trans 1:68–81CrossRefGoogle Scholar
  37. Servais P, Garnier J (2006) Organic carbon and bacterial heterotrophic activity in the maximum turbidity zone of the Seine estuary (France). Aquat Sci 68:78–85CrossRefGoogle Scholar
  38. Spikes H, Anghel V, Glovnea R (2004) Measurement of the rheology of lubricant films within elastohydrodynamic contacts. Tribol Lett 17:593–605CrossRefGoogle Scholar
  39. Wang S, Shu Z, Chen L, Yan P, Li B, Yuan C, Jian L (2019) Low temperature green nano-composite vegetable-gum drilling fluid. Appl Nanosci.  https://doi.org/10.1007/s13204-019-01033-1 Google Scholar

Copyright information

© King Abdulaziz City for Science and Technology 2019

Authors and Affiliations

  • S. Sabarinath
    • 1
    Email author
  • Sreenidhi Prabha Rajeev
    • 2
  • P. K. Rajendra Kumar
    • 3
  • K. Prabhakaran Nair
    • 4
  1. 1.Department of Mechanical EngineeringSaintgits College of EngineeringKottayamIndia
  2. 2.Department of Electronics and Communication EngineeringUKF College of Engineering and TechnologyKollamIndia
  3. 3.Department of Mechanical EngineeringNational Institute of Technology CalicutCalicutIndia
  4. 4.Department of Mechanical EngineeringSree Chitra Thirunal College of EngineeringThiruvananthapuramIndia

Personalised recommendations