Surface reactivity of nanoporous carbons: preparation and physicochemical characterization of sulfonated activated carbon fibers
- 11 Downloads
Here, we have examined the nanoporous activated carbon fibers (ACFs) sulfonated using the direct sulfonation and the staged method that included bromination, followed by sulfidation and oxidation. TEM confirmed the nanoporous structure of the prepared sulfonated ACFs. Nitrogen porometry and 2D nonlocal DFT simulations showed the nanoporosity reduction and variations of the pore size distribution because of the functionalization. Comparison of parameters of the SO3H groups confined in nanopores, e.g., the thermal stability and catalytic potential, showed that the most efficient acid sites, in the catalytic 2-propanol dehydration to propylene, are the SO3H groups grafted by the staged Houben–Weil methods. From the productivity of reactions used at the preparation stage, and in contrast to the one-staged aromatic substitution, the bromine addition to π sites of the edges of carbon matrix supplies enough active sites and is a reason for further high yields of the grafted thermostable SO3H groups. Hydrolysis of the grafted bromine and the surface oxidation of nanopores walls are parallel reactions that lowered the SO3H-related acidity, increasing the total acidity to 1.5 mmol g−1. The reported nanoporous sulfonated ACFs are effective to be used in the dehydration reactions catalyzed by solid acids.
KeywordsNanoporous activated carbon fibers Sulfonation Thermal analysis Carbon solid acids Molecular approaches
This work was supported in a part by an educational program of the Cabinet of Ministers of Ukraine “100 + 100 + 100”, according to the Cabinet of Ministers of Ukraine regulations No 411 of 13.04.2011 and No 546 of 16.05.2011, which is gratefully acknowledged by L.M.G. The authors (L.M.G., V.E.D., A.V.V., and V.V.L.) thank the Ministry of Education and Science of Ukraine for the financial support under the State budget programs [0111U006260] and [0114U003554]. One of the authors, V.V.L. acknowledges a partial financial support from the National Scholarship Program of Slovak Republic, Slovak Academic International Agency scholarships, ID numbers:  and , and the International Visegrad Fund for the scholarship, ID number  in 2018. V.V.L. and R.T.M. thankful for a partial support from the European Regional Development Fund (ERDF), the project “University Science Park TECHNICOM for innovation applications supported by knowledge technology”, ITMS: 26220220182, Operational Programme ‘Research and Development’.
Compliance with ethical standards
Conflict of interest
The authors declare that they have no conflict of interest.
- Barroso-Bogeat A, Alexandre-Franco M, Fernández-González C, Gómez-Serrano V (2015) Preparation of activated carbon-metal (hydr) oxide materials by thermal methods. Thermogravimetric-mass spectrometric (TG-MS) analysis. J Anal Appl Pyrolysis 116:243–252. https://doi.org/10.1016/j.jaap.2015.09.004 CrossRefGoogle Scholar
- Cremlyn RJW (2002) Chlorosulfonic acid: a versatile reagent. RSC, CambridgeGoogle Scholar
- Diyuk VE, Mariychuk RT, Lisnyak VV (2016a) Barothermal preparation and characterization of micro-mesoporous activated carbons. Textural studies, thermal destruction and evolved gas analysis with TG-TPD-IR technique. J Therm Anal Calorim 124:1119–1130. https://doi.org/10.1007/s10973-015-5208-6 CrossRefGoogle Scholar
- Gilbert EE (1977) Sulfonation and related reactions. Krieger, HuntingtonGoogle Scholar
- Hanelt S, Friedrich JF, Meyer-Plath A (2013) UV spectrometric indirect analysis of brominated MWCNTs with UV active thiols and an alkene—reaction kinetics, quantification and differentiation of adsorbed bromine and oxygen. Materials 6:3035–3063. https://doi.org/10.3390/ma6083035 CrossRefGoogle Scholar
- Kaludjerović B (2016) Nanoporous carbon fibrous materials. Chapter 22. In: Sattler KD (ed) Nanoparticles, nanocapsules, nanofibers, nanoporous structures, and nanocomposites, vol II. CRC Press, Boca Raton, pp 487–505. https://doi.org/10.1201/b19568-27
- Kang S, Ye J, Chang J (2013) Recent advances in carbon-based sulfonated catalyst: preparation and application. Int Rev Chem Eng 5:133–143Google Scholar
- Knaggs EA, Nepras MJ (2014) Sulfonation and sulfation, in Kirk–Othmer encyclopedia of chemical technology. Wiley, HobokenGoogle Scholar
- Noroozi B, Mehdipour M (2016) Activated carbon nanoadsorbents. In: Sattler KD (ed) Nanoparticles, nanocapsules, nanofibers, nanoporous structures, and nanocomposites, vol II, CRC Press, Boca Raton, pp 203–219. https://doi.org/10.1201/b19568-12
- Park S-J (2015) Carbon fibers. Springer, DordrechtGoogle Scholar
- Rodríguez-Reinoso F, Sepúlveda-Escribano A, Silvestre-Albero J (2016) Sorption processes. In: Kanellopoulos N (ed) Nanoporous materials: advanced techniques for characterization, modeling, and processing, 1st edn. CRC, Taylor & Francis, Boca Raton, pp 307–353. https://doi.org/10.1201/b10610-13
- Smith MB, March J (2007) March’s advanced organic chemistry: reactions, mechanisms, and structure. Wiley, HobokenGoogle Scholar
- OJSC SvetlogorskKhimvolokno (2016) Activated carbon fiber cloth busofit. http://www.sohim.by/eng/production/carbon/busofit. Accessed 14 Aug 2018
- Thommes M, Kaneko K, Neimark AV, Olivier JP, Rodriguez-Reinoso F, Rouquerol J, Sing KSW (2015) Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC technical report). Pure Appl Chem 87:1051–1069. https://doi.org/10.1515/pac-2014-1117 CrossRefGoogle Scholar
- Vollhardt P, Schore NE (2007) Organic chemistry: structure and function. Freeman, BostonGoogle Scholar
- Wade LG Jr (2013) Organic chemistry, 8th edn. Pearson, BostonGoogle Scholar