Advertisement

Transactions of the Indian Institute of Metals

, Volume 72, Issue 12, pp 3241–3248 | Cite as

Investigation of the Effects of Different Experimental Conditions on the Final Product of a Chemical Reduction Method Used to Fabricate Silver Nanoparticles

  • Rabie Abu SaleemEmail author
  • Ahmad Alsabbagh
  • Hiba Al-Khodire
  • Ibrahim Batayneh
Technical Paper
  • 33 Downloads

Abstract

Metallic nanoparticles are a focus of interest for a diversity of scientific fields such as medical, engineering and agricultural fields. For such fields, metallic nanoparticles with controlled sizes are pursued for proper utilization in their prospect applications like radiation detection and drug delivery. In this paper, a parametric study was carried out to investigate the effect of different experimental conditions on the size distribution of metallic nanoparticles fabricated by a chemical reduction method. The study entailed modification of four experimental conditions: concentration of the metal precursor (AgNO3), concentration of the reducing agent (NaBH4), dropping rate of the reducing agent to the precursor solution and reaction temperature. A noticeable increase in the average size was observed with increasing the concentration of the reducing agent, decreasing the dropping rate and increasing the reaction temperature. Other changes were found to have negligible effects. Decreasing both the reaction temperature and the concentration of the reducing agent and increasing the dropping rate led to enhanced monodispersity of the size distribution. Changing the concentration of the metal precursor, on the other hand, had a negligible effect of dispersity. Finally, more particle aggregation was observed for both slow dropping rates and high reaction temperatures.

Keywords

Metallic nanoparticles Chemical reduction method Size distribution Experimental conditions 

Notes

Acknowledgements

Gratitude is duly expressed to King Abdullah II Fund for Development (KAFD) for offering the financial support necessary to complete this work and King Abdullah II Design and Development Bureau (KADDB) for their valuable supervision and guidance. This work would have not been possible without their support and assistance.

References

  1. 1.
    Humplik T, Nanotechnology22 (2011) 292001.CrossRefGoogle Scholar
  2. 2.
    Joshi M, and Bhattacharyya A, Text Prog43 (2011) 155.CrossRefGoogle Scholar
  3. 3.
    Kubik T, Bogunia-Kubik K, and Sugisaka M, Curr Pharm Biotechnol6 (2005) 17.CrossRefGoogle Scholar
  4. 4.
    Hammig M D, Nanoscale Methods to Enhance the Detection of Ionizing Radiation (2012).Google Scholar
  5. 5.
    Doty R C, Tshikhudo T R, Brust M, and Fernig D G, Chem Mater17 (2005) 4630.CrossRefGoogle Scholar
  6. 6.
    Arvizo R R, Bhattacharyya S, Kudgus R A, Giri K, Bhattacharya R, and Mukherjee P, Chem Soc Rev41 (2012) 2943.CrossRefGoogle Scholar
  7. 7.
    Marie-Christine D, and Astruc D, Chem Rev104 (2003) 293.Google Scholar
  8. 8.
    Booth S G, Uehara A, Chang S Y, La Fontaine C, Fujii T, Okamoto Y, Imai T, Schroeder S L, and Dryfe R A W, Chem Sci8 (2017) 7954.CrossRefGoogle Scholar
  9. 9.
    Hamamoto M, and Yagyu H, in 2017 IEEE 17th International Conference on Nanotechnology (IEEE-NANO) (2017), p 632.Google Scholar
  10. 10.
    Bhatte K D, Deshmukh K M, Patil Y P, Sawant D N, Fujita S I, Arai M, and Bhanage B M, Particuology10 (2012) 140.CrossRefGoogle Scholar
  11. 11.
    Hong H K, Gong M S, and Park C K, Bull Korean Chem Soc (2009).Google Scholar
  12. 12.
    Bastús N G, Merkoçi F, Piella J, and Puntes V, Chem Mater26 (2014) 2836.CrossRefGoogle Scholar
  13. 13.
    Kumar S, Gandhi K S, and Kumar R, Ind Eng Chem Res46 (2007) 3128.CrossRefGoogle Scholar
  14. 14.
    Daraio C, and Jin S, in Nanotechnology for Biology and Medicine (2012), p 27.Google Scholar
  15. 15.
    Tan K S, Cheong K Y, J Nanopart Res (2013) 1537.Google Scholar
  16. 16.
    Evanoff D D, and Chumanov G, ChemPhysChem6 (2005) 1221.CrossRefGoogle Scholar
  17. 17.
    Male K B, Li J, Bun C C, Ng S-C, and Luong J H T, J Phys Chem C112 (2008) 443.CrossRefGoogle Scholar
  18. 18.
    Oliveira M M, Castro E G, Canestraro C D, Zanchet D, Ugarte D, Roman L S, and Zarbin A J, J Phys Chem B110 (2006) 17063.CrossRefGoogle Scholar
  19. 19.
    Brust M, Walker M, Bethell D, Schiffrin D J, and Whyman R, J Chem Soc, Chem Commun (1994) 801.Google Scholar
  20. 20.
    Camargo P H C, Rodrigues T S, da Silva A G M, and Wang J, in Metallic Nanostructures, Springer, Cham (2015), p 49.Google Scholar
  21. 21.
    Polte J, CrystEngComm17 (2015) 6809.CrossRefGoogle Scholar
  22. 22.
    Panigrahi S, in Bachelor Degree Project, no. 10600028 (2010) p 52.Google Scholar
  23. 23.
    Thanh N T K, Maclean N, and Mahiddine S, Chem Rev114 (2014) 7610.CrossRefGoogle Scholar
  24. 24.
    Wen T, Brush L N, and Krishnan K M, J Colloid Interface Sci419 (2014) 79.CrossRefGoogle Scholar
  25. 25.
    Liguo Y, and Yanhua Z, Rare Met Mater Eng39 (2010) 401.CrossRefGoogle Scholar
  26. 26.
    Aslan K, and Pérez-Luna V H, Langmuir18 (2002) 6059.CrossRefGoogle Scholar
  27. 27.
    Perala S R K, and Kumar S, Langmuir29 (2013) 9863.CrossRefGoogle Scholar
  28. 28.
    Korgel B A, Fullam S, Connolly S, and Fitzmaurice D, J Phys Chem B102 (1998) 8379.CrossRefGoogle Scholar
  29. 29.
    Shon Y-S, Chuc S, and Voundi P, Colloids Surf A Physicochem Eng Asp352 (2009) 12.CrossRefGoogle Scholar
  30. 30.
    Fernández-Lodeiro J, Nuñez C, Lodeiro A F, Oliveira E, Rodríguez-González B, Dos Santos A A, Capelo J L, and Lodeiro C, J Nanoparticle Res16 (2014) 2315.CrossRefGoogle Scholar
  31. 31.
    Faghihi F, Hazendonk P, and Montina T, Langmuir31 (2015) 3473.CrossRefGoogle Scholar
  32. 32.
    Hostetler M J, Wingate J E, Zhong C J, Harris J E, Vachet R W, Clark M R, Londono J D, Green S J, Stokes J J, Wignall G D, and Glish G L, Langmuir14 (1998) 17.CrossRefGoogle Scholar
  33. 33.
    Rao C N R, and Kalyanikutty K P, Acc Chem Res41 (2008) 489.CrossRefGoogle Scholar

Copyright information

© The Indian Institute of Metals - IIM 2019

Authors and Affiliations

  1. 1.Department of Nuclear EngineeringJordan University of Science and TechnologyIrbidJordan
  2. 2.Korea Advanced Institute of Science and Technology (KAIST)DaejeonSouth Korea
  3. 3.Polytechnic University of CataloniaBarcelonaSpain

Personalised recommendations