Advertisement

Relationship Between Microstructure and Properties of Limestone Calcined Rapidly at High Temperatures

  • Liyou Wang
  • Zhengliang XueEmail author
  • Jinlin Cai
  • Bin Hu
Technical Paper
  • 5 Downloads

Abstract

The relationship between microstructure and physicochemical properties of limestone including, porosity, bulk density, pore size distribution, specific surface area and activity were studied under the condition of rapid heating from room temperature to 1350–1550 °C. The results showed that complete decomposition of limestone (diameter 12.5–15 mm) at 1350 °C, 1450 °C and 1550 °C took 11.7 min, 9.2 min and 6.9 min, respectively. With the prolongation of calcination, lime porosity first increased and then decreased. The peak value of lime porosity was found roughly at the end of limestone decomposition. The variation of bulk density, however, was just the opposite compared to porosity. When calcination temperature increased, the pore size of lime became larger, and the number of micropores decreased correspondingly; furthermore, while calcination time increased, micropores disappeared fast, and macropores increased rapidly. The specific surface area of lime decreased with prolonged calcination time. The best activity of lime could be obtained with high porosity and high specific surface area at the same time. The maximum activity values of lime were 379 mL, 365 mL and 267 mL at the temperatures of 1350 °C, 1450 °C and 1550 °C, respectively.

Keywords

Limestone High-temperature calcination Microstructure Physicochemical property Activity of lime 

Notes

Acknowledgements

The authors gratefully acknowledge the National Natural Science Foundation of China for financially supporting this work (No. 51374160).

Authors’ Contributions

ZX conceived and designed the experiments, JC did SEM and the EDS analyses, and BH assisted the experiment. LW contributed to the experimental part, analyzed the data and wrote the paper.

Compliance with Ethical Standards

Conflict of interest

The authors declare that they have no conflict of interest.

References

  1. 1.
    Guo H, Theory and technology of active lime production, Metallurgical Industry Press, Beijing (2014), p 112.Google Scholar
  2. 2.
    Tasuku H, and Shinya F, ISIJ Inter 4 (2006) 490.Google Scholar
  3. 3.
    Feng X, Zhang Z, and Tian H, Sci Technol Overseas Build Mater 24 (2003) 6.Google Scholar
  4. 4.
    Wang X, Li J, and Xue Z, Bull Chin Ceram Soc 2 (2016) 374.Google Scholar
  5. 5.
    Song W, Li H, Guo L, Li Y, and Feng J. China Metall 6 (2012) 49.Google Scholar
  6. 6.
    Li C, Li H, Zhu S, Dong D, Wang G, and Li S, China Metall 10 (2015) 66.Google Scholar
  7. 7.
    Wang X, Xue Z, and Li J, J S Afr I Min Metall 6 (2016) 1159.Google Scholar
  8. 8.
    Guang Z, Wang N, Chen M, Deng H, and Li X, in 9th International Symposium on High-Temperature Metallurgical Processing (2018), p 623.Google Scholar
  9. 9.
    Hao H, Zhang Y, Hao S, Zhang C, and Jiang W, J Iron Steel Res Int 9 (2016) 884.CrossRefGoogle Scholar
  10. 10.
    Tang B, Wang X, Zou Z, and Yu A, Steel Res Int 2 (2016) 226.CrossRefGoogle Scholar
  11. 11.
    Deng T, Patrice N, Mattias E, and Du S, Metall Mater Trans B 2 (2013) 98CrossRefGoogle Scholar
  12. 12.
    GB/T 2997, Test method for bulk density, apparent porosity and true porosity of dense shaped refractory products, China Standard Press, Beijing (2015), p 1.Google Scholar
  13. 13.
    GB/T 19578, Determination of the Specific Surface Area of Solids by Gas Adsorption Using the BET Method. China Standard Press, Beijing, China (2004), p 1.Google Scholar
  14. 14.
    GB/T 21650.1, Pore Size Distribution and Porosity of Materials by Mercury Porosimetry and Gas Absorption, China Standard Press, Beijing, China (2008), p 1.Google Scholar
  15. 15.
    YB/T 105, Methods of Physical Testing for Metallurgical Quicklime, China Standard Press, Beijing, China (2014), p 1.Google Scholar
  16. 16.
    Milne R, Silcox G, and Pershing D, Ind Eng Chem Res 2 (1990) 139.CrossRefGoogle Scholar
  17. 17.
    Guo H, Yin Z, and Wang H, Int J Min Met Mater 2 (2008) 148.Google Scholar
  18. 18.
    Li D, Foreign Refract 5 (2008) 1.Google Scholar
  19. 19.
    Wu J, and Wu B, Foreign Refract 3 (2009) 4.Google Scholar
  20. 20.
    Deng X, Yan X, and Lu Y, Chem Eng Des 2 (2008) 22.Google Scholar

Copyright information

© The Indian Institute of Metals - IIM 2019

Authors and Affiliations

  • Liyou Wang
    • 1
  • Zhengliang Xue
    • 1
    Email author
  • Jinlin Cai
    • 1
  • Bin Hu
    • 1
  1. 1.The State Key Laboratory of Refractories and MetallurgyWuhan University of Science and TechnologyWuhanChina

Personalised recommendations