Advertisement

Transactions of the Indian Institute of Metals

, Volume 72, Issue 9, pp 2417–2431 | Cite as

Study of Tribological Properties of Nano-Sized Red Mud Particle-Reinforced Polyester Composites

  • S. Richard
  • J. SelwinRajadurai
  • V. ManikandanEmail author
  • M. Chithambara Thanu
  • V. Arumugaprabu
  • R. Deepak Joel Johnson
Technical Paper
  • 33 Downloads

Abstract

Red mud (RM) in powder form is a waste substance obtained during extraction of pure alumina from Bauxite ore by Bayer’s method. In this work, this red mud is used as reinforcement in nano-sized particulate form in the unsaturated polyester matrix. The mean particle size of 720 nm, 612 nm, 475 nm, 263 nm, and 110 nm were produced by ball milling for the milling period of 6–30 h. The composites were prepared by varying the size of the particle and for different particle weight fraction of 0.5, 1.0, 1.5, 2.0 and 2.5 wt.%. The wear characteristics of these red mud particulate composites were studied, and the effect of the particle size variation and particle weight fraction were reported. Particle size and particle content were observed to play a major part in frictional characteristics of the composites. The reduction in specific wear rate was 47.72% for 110 nm particle size composite sample with a weight fraction of 2.5 wt.%, and it showed 39.28% reduction in coefficient of friction on comparing with that of pure cured polyester resin. Red mud particles were characterized by FTIR, XRD and AFM analysis. Worn-out surfaces were analyzed by scanning electron microscope (SEM) for morphological study.

Keywords

Red mud Polymer composite Nanoparticulate Friction SEM 

Notes

Acknowledgements

We whole heartedly thank the management of Dr. Sivanthi Aditanar College of Engineering, Tiruchendur, and Govt. College of Engineering, Tirunelveli and Kalasalingam Academy of Research, Krishnankoil, Srivilliputhur, Virudhunagar, Tamil Nadu, India, for providing all research facilities.

References

  1. 1.
    Richard S, SelwinRajadurai J and Manikandan V, J. Tribol. 139 (2016) 012202.CrossRefGoogle Scholar
  2. 2.
    Arumugaprabu V, Uthayakumar M, Manikandan V, Rajini N and Jeyaraj P, Mater. Des. 64 (2014) 270.CrossRefGoogle Scholar
  3. 3.
    Satheesh Raja R, Manisekar K and Manikandan V, Mater. Des. 55 (2014) 499.CrossRefGoogle Scholar
  4. 4.
    Manikandan V, WinowlinJappes J, Suresh Kumar S and Amuthakkannan P, Compos. Part B 43 (2012) 812.CrossRefGoogle Scholar
  5. 5.
    Ding M, Liu J, Liu B, Wang X, Li T and Cao D, in Proceedings of SAE-China Congress 2015: Selected Papers (2015) 297.Google Scholar
  6. 6.
    George P, Bhowmik S, Abraham M, Sriram P, Pitchan M, and Ajeesh G, P. I. MECH. ENG. L J. MAT (2016)  https://doi.org/10.1177/1464420716660874.CrossRefGoogle Scholar
  7. 7.
    Chauhan S and Thakur S, Mater. Des. 51 (2013) 398.CrossRefGoogle Scholar
  8. 8.
    Arumugaprabu V, Manikandan V and Uthayakumar M, IJE TRANSACTIONS B Appl. 27 (2014) 1741.Google Scholar
  9. 9.
    Prabu, V.A, Manikandan V and Uthayakumar M, P. I. Mech. Eng. L J. Mat 227 (2013) 143.Google Scholar
  10. 10.
    Akinci A, Akbulut H and Yilmaz F, Polym. Plast. Technol. Eng. 46 (2007) 31.CrossRefGoogle Scholar
  11. 11.
    Ahmed K, J. Adv. Res. 6 (2015) 225.CrossRefGoogle Scholar
  12. 12.
    Rout A and Ray S, Compos. Mech. Comput. Appl. Int. J. 5 (2014) 259.CrossRefGoogle Scholar
  13. 13.
    Mallakpour S and Khadem E, Prog. Polym. Sci. 51 (2015) 74.CrossRefGoogle Scholar
  14. 14.
    Mittal G, Dhand V, Rhee K, Park S and Lee W, J. Ind. Eng. Chem. 21 (2015) 11.CrossRefGoogle Scholar
  15. 15.
    Gao Z and Zhao L, Mater. Des. 66 (2015) 176.CrossRefGoogle Scholar
  16. 16.
    Sharma S, Bijwe J, Panier S and Sharma M, Wear 332 (2015) 863.CrossRefGoogle Scholar
  17. 17.
    Vaisakh S, Peer Mohammed A, Hassanzadeh M, Tortorici J, Metz R and Ananthakumar S, Polym. Adv. Technol. 27 (2016) 905.CrossRefGoogle Scholar
  18. 18.
    Jia Z, Hao C, Yan Y and Yang Y, Wear 338 (2015) 282.CrossRefGoogle Scholar
  19. 19.
    Wang W and Liu T, J. Appl. Polym. Sci. 109 (2008) 1654.CrossRefGoogle Scholar
  20. 20.
    Tjong S C and Bao S, e-Polymers 7 (2007) 1618.Google Scholar
  21. 21.
    Liu Y and Kontopoulou M, Polymer 47 (2006) 7731.CrossRefGoogle Scholar
  22. 22.
    Suresha B, Ravi Kumar B, Venkataramareddy M and Jayaraju T, Mater. Des. 31 (2010) 1993.CrossRefGoogle Scholar
  23. 23.
    Richard S, Rajadurai J S and Manikandan V, Int. J. Polym. Anal. Charact. 21 (2016) 462.CrossRefGoogle Scholar
  24. 24.
    Lin J, Composites Part B 38 (2007) 79.CrossRefGoogle Scholar
  25. 25.
    Sun T, Fan H, Wang Z, Liu X and Wu Z, Mater. Des. 87 (2015) 10.CrossRefGoogle Scholar
  26. 26.
    Bahadur S and Sunkara C, Wear 258 (2005) 1411.CrossRefGoogle Scholar
  27. 27.
    Chang L, Zhang Z, Ye L and Friedrich K, Tribol. Int. 40 (2007) 1170.CrossRefGoogle Scholar
  28. 28.
    Kurahatti R V, Surendranathan A O, Srivastava S, Singh N, Kumar A R and Suresha B, Mater. Des. 32 (2011) 2644.CrossRefGoogle Scholar
  29. 29.
    Samal S, Ray A K and Bandopadhyay A, Int. J. Miner. Process. 118 (2013) 43.CrossRefGoogle Scholar
  30. 30.
    Kumar A and Kumar S, Constr. Build. Mater. 38 (2013) 865.CrossRefGoogle Scholar
  31. 31.
    Pontikes Y, Vangelatos I, Boufounos D, Fafoutis D and Angelopoulus G N, Adv. Sci. Technol. 45 (2006) 2176.CrossRefGoogle Scholar
  32. 32.
    Liu Y, Lin C and Wu Y, J. Hazard. Mater. 146 (2007) 255.CrossRefGoogle Scholar
  33. 33.
    Pinnock W R, Gordon J N, J. Mater. Sci. 27 (1992) 692.CrossRefGoogle Scholar
  34. 34.
    Nath H, Sahoo A, Int. J. Appl. Bioeng. 8 (2014) 1.CrossRefGoogle Scholar
  35. 35.
    Nan F, Xu Y, Xu B, Gao F, Wu Y and Li Z, Tribol. Int. 81 (2015) 199.CrossRefGoogle Scholar
  36. 36.
    Singh D, Thakre G D, Sivakumar Konathala L N and Prasad V V D N, Adv. Tribol. 2016 (2016) 1901493.CrossRefGoogle Scholar
  37. 37.
    Sun W, Xuan X, Li L and An J, Materials 11 (2018) 505.CrossRefGoogle Scholar
  38. 38.
    Bermudez M-D, Carrion-Vilches F J and Martinez-Nicolas C, J. Appl. Polym. Sci. 831 (1999) 74.Google Scholar
  39. 39.
    M-D Bermudez, Carrion-Vilches FJ and Martinez-Mateo I, J. Appl. Polym. Sci. 81 (2001) 2426.CrossRefGoogle Scholar
  40. 40.
    Fu S Y, Feng X Q, Lauke B and Mai Y W, Compos. Part B 39 (2008) 933.CrossRefGoogle Scholar
  41. 41.
    Skarvelis P and Papadimitriou G D, Surf. Coat. Technol. 203 (2009) 1384.CrossRefGoogle Scholar
  42. 42.
    Zhang G, Yin Y and Li J, J. Mater. Res. 32 (2017) 354.CrossRefGoogle Scholar

Copyright information

© The Indian Institute of Metals - IIM 2019

Authors and Affiliations

  • S. Richard
    • 1
  • J. SelwinRajadurai
    • 2
  • V. Manikandan
    • 3
    Email author
  • M. Chithambara Thanu
    • 1
  • V. Arumugaprabu
    • 3
  • R. Deepak Joel Johnson
    • 3
  1. 1.Mechanical Engineering DepartmentSivanthi Aditanar College of EngineeringTiruchendurIndia
  2. 2.Mechanical Engineering DepartmentGovernment College of EngineeringTirunelveliIndia
  3. 3.Department of Mechanical EngineeringKalasalingam Academy of Research and EducationKrishnankoilIndia

Personalised recommendations