Advertisement

Effect of Cooling Medium on Microstructure, Impact and Hardness Properties of Al–15Sn Alloy

  • Jayaram Bhat
  • SatyanarayanEmail author
Technical Paper
  • 7 Downloads

Abstract

In the present study, effect of quenching/cooling conditions on microstructure, impact and hardness properties of custom-made Al–15Sn alloy were investigated. Heat-treated Charpy V-notch rectangular bar specimens were suddenly quenched in normal water (28 °C), cold water (6 °C) and ice bath (0 °C). Further, experiments were repeated and allowed to cool in an open atmosphere (air) and furnace to achieve different cooling conditions. Impact and hardness properties were assessed for the alloy quenched/cooled in different conditions. Microstructures revealed that alloy quenched in cold water showed finest (4.9 µm) Sn phase particles compared to other cooling conditions. Specimen quenched in cold water exhibited highest impact energy (77 Joules) and hardness number (RHN 90.7) whereas as-received sample showed least impact strength (32 J) and hardness (RHN 73.5).

Keywords

Al–Sn Heat treatment Cooling Quenching Microstructure Mechanical properties 

Notes

References

  1. 1.
    Ratke L, and Diefenbach S, Mater Sci Eng: R: Rep 15 (1995) 263.CrossRefGoogle Scholar
  2. 2.
    Wu C, Li M, Jia P, Liu R, Cui S, and Geng H, J Alloys Compd 688 (2016) 18.CrossRefGoogle Scholar
  3. 3.
    Gebretsadik D W, Hardell J, and Prakash B, Wear 340 (2015) 63.CrossRefGoogle Scholar
  4. 4.
    Grün F, Gódor I, Gärtner W, and Eichlseder W, Tribol Int 44 (2011) 1271.CrossRefGoogle Scholar
  5. 5.
    Lu Z C, Gao Y, Zeng M Q, and Zhu M, Wear 309 (2014) 216.CrossRefGoogle Scholar
  6. 6.
    Bertelli F, Freitas E S, Cheung N, Arenas M A, Conde A, de Damborenea J, and Garcia A, J Alloys Compd 695 (2017) 3621.CrossRefGoogle Scholar
  7. 7.
    Pathak J P, and Mohan S, Bull Mater Sci 26 (2003) 315.CrossRefGoogle Scholar
  8. 8.
    Rosales I, Gonzalez-Rodriguez G, Gama J L, and Guardian R, Mater Sci Appl 5 (2014) 330.CrossRefGoogle Scholar
  9. 9.
    Satyanarayan, and Bhat Jayaram, Res Develop Mater Sci 4 (2018) 2576.Google Scholar
  10. 10.
    Liu X, Zeng M Q, Ma Y, and Zhu M, Wear 294 (2012) 387.CrossRefGoogle Scholar
  11. 11.
    Belov N A, Akopyan T K, Gershman I S, Stolyarova O O, and Yakovleva AO, J Alloys Compd 695 (2017) 2730.CrossRefGoogle Scholar
  12. 12.
    Stuczyñski T, Mater Des 18 (1997) 369.CrossRefGoogle Scholar
  13. 13.
    Cruz K S, Spinelli J E, Ferreira I L, Cheung N, and Garcia A, Mater Chem Phys 109 (2008) 87.CrossRefGoogle Scholar
  14. 14.
    Rusin N M, Skorentsev A L, and Kolubaev E A, Trans Tech Publ 1040 (2014) 166.CrossRefGoogle Scholar
  15. 15.
    Marrocco T, Driver L C, Harris S J, and McCartney D G, J Therm Spray Technol 15 (2006) 634.CrossRefGoogle Scholar
  16. 16.
    Song K Q, Lu Z C, Zhu M, Hu R Z, and Zeng M Q, Surface Coat Technol 325 (2017) 682.CrossRefGoogle Scholar
  17. 17.
    Ning X J, Kim J H, Kim H J, and Lee C, Appl Surf Sci 255 (2009) 3933.CrossRefGoogle Scholar
  18. 18.
    Schouwenaars R, Torres J A, Jacobo V H, and Ortiz A, Tailoring the Mechanical Properties of Al–Sn-Alloys for Tribological Applications, (2007), p 317.CrossRefGoogle Scholar
  19. 19.
    Chinnarasu K, Prakash S O, and Krishna C R R, J Technol Adv Sci Res 3 (2017) 17.Google Scholar
  20. 20.
    Kim Y S, Kim K S, Hwang C W, and Suganuma K, J Alloys Compd 352 (2003) 237.Google Scholar
  21. 21.
    Prabhu K N, Deshapande P, and Satyanarayan, Mater Sci Eng A 533 (2012) 64.CrossRefGoogle Scholar

Copyright information

© The Indian Institute of Metals - IIM 2019

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringAlva’s Institute of Engineering and TechnologyMoodbidriIndia
  2. 2.Department of Mechanical EngineeringSri Dharmasthala Manjunatheshwara Institute of TechnologyUjireIndia

Personalised recommendations