Advertisement

Optimization on Tribological Behaviour of Milled Nano-B4C Particles Reinforced with AZ91 Alloy Through Powder Metallurgy Method

  • C. SankarEmail author
  • K. Gangatharan
  • S. Christopher Ezhil SinghEmail author
  • R. Krishna Sharma
  • K. Mayandi
Technical Paper
  • 20 Downloads

Abstract

In this present work, the Taguchi-based grey relational method was used to find the optimal input parameters on wear behaviour (WB) of AZ91 alloy prepared through powder metallurgy (P/M) with different wt% of milled boron carbide (B4C) nanoparticles reinforced with AZ91 alloy. To find out the significant effects on two responses namely wear rate (WR) and coefficient of friction (CoF) as output parameters and the input parameters as wt.%, load and sliding distance (SD) were studied by using L orthogonal array (OA) with 25 experimental runs with one replication. Characterization of the nanocomposite precursors was done using scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy (EDS). The influence and contribution percentage of the input parameters were investigated using analysis of variance (ANOVA). Grey relational grade (GRG) was employed to calculate the rank of the composites with least value of WR and CoF for various composites. Results show that the reinforcement plays a major role on the composites compared to load and SD. The result shows that there is an enhancement in wear resistance (Rw) for B4C nanoparticles added with AZ91 alloy. The worn surface analysis demonstrates that the WR decreases with the increase in reinforcement content to the AZ91 alloy, and we can also see the smooth surface for the composites. EDS of the worn surface shows the presence of oxide debris, which protects the worn out of the particles from the pin surface of the wear-tested specimen.

Keywords

AZ91 alloy Boron carbide Wear rate Coefficient of friction Grey relational analysis ANOVA 

Notes

References

  1. 1.
    Chalay-Amoly A, Zarei-Hanzaki A, Changizian P, Fatemi-Varzaneh S M, and Maghsoudi M H, Mater Des 47 (2013) 820.CrossRefGoogle Scholar
  2. 2.
    Goh C S, Wei J, Lee L C, and Gupta M, Compos Sci Technol 68 (2008) 1432.CrossRefGoogle Scholar
  3. 3.
    Guleryuz L F, Ozan S, Uzunsoy D, and Ipek R, Powder Metall Met Ceram, 51 (2012), 7CrossRefGoogle Scholar
  4. 4.
    ErshadulAlam Md, and Han S, J Alloys Compon, 509 (2011) 8522.CrossRefGoogle Scholar
  5. 5.
    Narayanasamy P, Selvakumar N, and Balasundar P, Trans Indian Inst Met,  https://doi.org/10.1007/s12666-015-0530-z.
  6. 6.
    Abdullahi U, Maleque M A, and Nirmal U, Procedia Eng 68 (2013) 736.CrossRefGoogle Scholar
  7. 7.
    Selvam B, Marimuthu P, Narayanasamy R, and Anandakrishnan V, Mater Des 58 (2014) 475.CrossRefGoogle Scholar
  8. 8.
    Wei T Z, Shamsuri S R B, and Yee C S, Procedia Engineering 68 (2013) 703.CrossRefGoogle Scholar
  9. 9.
    Lim C Y H, Leo D K, and Ang J J S, and Gupta M, Wear 259 (2005) 620.CrossRefGoogle Scholar
  10. 10.
    Algur V, LakshmanaNaik T K, Chikmeti R B, AkhilSohan A, Sunil G, Mohan, and Shekappa K, Dry sliding wear behaviour of aluminium alloy reinforced with SiC metal matrix composites using taguchi method. Int J Mech Eng Rob Res 3 (2014) 49.Google Scholar
  11. 11.
    Pang J S, Ansari M N M, Zaroog O S, Ali M H, and Sapuan S M, HBRC J 10 (2014) 138.Google Scholar
  12. 12.
    Sahu P K, and Pal S, J Mag Alloys xx (2015) 1.Google Scholar
  13. 13.
    Udaya Prakash J,Perumal S, Arun Pillai K V, SuriyaPrathaban S, and Moorthy T V, Int J Appl Eng Res 10 (2015) 457.Google Scholar
  14. 14.
    ThirumalaiKumaran S, Uthayakumar M, and Aravindan S, Tribology 8 (2014) 187.Google Scholar
  15. 15.
    Dhinakar A, Panneer Selvam T, and Raghuraman S, Int J Adv Mater Sci Eng (2014) 13.Google Scholar
  16. 16.
    Sudeepan J, Kumar K, Barman T K, and Sahoo P, Procedia Technol 14 (2014) 196.Google Scholar
  17. 17.
    Gangatharan K, and Selvakumar N, Trans Indian Inst Met. 69 2016 717.CrossRefGoogle Scholar
  18. 18.
    Selvakumar N, and Vettivel S C, Mater Des 46 (2013) 16.CrossRefGoogle Scholar
  19. 19.
    Ravindran P, Manisekar K, Narayanasamy P, Selvakumar N, and Narayanasamy R, Mater Des 39 (2012) 42.CrossRefGoogle Scholar
  20. 20.
    Selvakumar N, and Ramkumar T, Trans Indian Inst Met (2015)  https://doi.org/10.1007/s12666-015-0681-y.
  21. 21.
    Gangatharan K, and Selvakumar N, Adv Mater Sci Eng 2016 (2016) 1.Google Scholar
  22. 22.
    Christopher Ezhil Singh S, and Selvakumar N, Arch Civ Mech Eng 17 (2017) 446.Google Scholar
  23. 23.
    Selvakumar N, and Christopher Ezhil Singh S, Arch Civ Mech Eng 16 (2016) 537.Google Scholar

Copyright information

© The Indian Institute of Metals - IIM 2019

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringPSN College of Engineering and TechnologyTirunelveliIndia
  2. 2.Department of Mechanical EngineeringVimal Jyothi Engineering College, KannurChemperiIndia
  3. 3.Department of PhysicsS.T. Hindu CollegeNagercoil, KottarIndia
  4. 4.Department of Mechanical EngineeringKalasalingam Academy of Research and EducationKrishnankoil, Anand NagarIndia

Personalised recommendations