Advertisement

Microstructure, Mechanical and Bio-corrosion Behaviour of Thermomechanically Processed Mg–4Li–1Ca Alloy

  • N. Sriraman
  • P. Bhagat Singh
  • S. KumaranEmail author
Technical Paper
  • 7 Downloads

Abstract

Microstructure, mechanical and bio-corrosion behaviour of Mg–4Li–1Ca rolled at different temperatures was systematically investigated. The microstructure revealed variation in grain size and defect densities like twins and dispersion of Mg2Ca compounds due to the effect of hot rolling at different temperatures (250, 300 and 350 °C). In vitro tests like electrochemical polarization and hydrogen evolution tests were performed in Kokubo’s simulated body fluid to understand bio-corrosion behaviour. The mechanical properties were evaluated by uniaxial tensile test. All these test results showed that the Mg–4Li–1Ca alloy exhibited superior mechanical and bio-corrosion properties after hot rolling. In addition, the alloy rolled at 350 °C revealed better bio-corrosion behaviour and biocompatibility than 250 and 300 °C hot-rolled alloys.

Keywords

Mg–4Li–1Ca alloy Hot rolling Twins Bio-corrosion 

Notes

References

  1. 1.
    Yun Y, Dong Z, Yang D, Schulz M J, Shanov V N, Yarmolenko S, Xu Z, Kumta P, and Sfeir C, Mater Sci Eng C 29 (2009) 1814.  https://doi.org/10.1016/j.msec.2009.02.008.CrossRefGoogle Scholar
  2. 2.
    Witte F, Hort N, Vogt C, Cohen S, Kainer K U, Willumeit R, and Feyerabend F, Curr Opin Solid State Mater Sci 12 (2008) 63.  https://doi.org/10.1016/j.cossms.2009.04.001.CrossRefGoogle Scholar
  3. 3.
  4. 4.
    Sanchez A H M, Luthringer B J C, Feyerabend F, and Willumeit R, Acta Biomater 13 (2015) 16.  https://doi.org/10.1016/j.actbio.2014.11.048.CrossRefGoogle Scholar
  5. 5.
    Zeng R, Sun L, Zheng Y, Cui H, and Han E, Corros Sci 79 (2014) 69.  https://doi.org/10.1016/j.corsci.2013.10.028.CrossRefGoogle Scholar
  6. 6.
    Wang T, Wu R, Zhang M, Li L, Zhang J, and Li J, Mater Sci Eng A 528 (2011) 5678.  https://doi.org/10.1016/j.msea.2011.04.034.CrossRefGoogle Scholar
  7. 7.
    Kim W, Kim J, Lee J, and Seok H, Mater Lett 62 (2008) 4146.  https://doi.org/10.1016/j.matlet.2008.06.028.CrossRefGoogle Scholar
  8. 8.
    Zou G, Peng Q, Wang Y, and Liu B, J Alloys Compd 618 (2015) 44.  https://doi.org/10.1016/j.jallcom.2014.08.115.CrossRefGoogle Scholar
  9. 9.
    Song G, Atrens A, and St. John D, Magnes Technol Symp 2001 (2001) 255.  https://doi.org/10.1002/9781118805497.ch44.Google Scholar
  10. 10.
    Aung N N, and Zhou W, Corros Sci 52 (2010) 589.  https://doi.org/10.1016/j.corsci.2009.10.018.CrossRefGoogle Scholar

Copyright information

© The Indian Institute of Metals - IIM 2019

Authors and Affiliations

  1. 1.Department of Metallurgical and Materials EngineeringNational Institute of TechnologyTiruchirappalliIndia

Personalised recommendations