Advertisement

Modeling and Optimization of HAZ Characteristics for Submerged Arc Welded High Strength Pipeline Steel

  • Satish Kumar Sharma
  • Sachin Maheshwari
  • Ratnesh Kumar Raj Singh
Technical Paper
  • 20 Downloads

Abstract

Heat affected zone (HAZ) is the most critical part of welded pipe in oil and gas pipelines as HAZ shows more susceptibility toward embrittlement and weld cracking. It happens because microstructural changes occur due to high heat of welding. Heat input and preheating temperature together control the cooling time of weld which in turn determines the weld microstructure and its mechanical properties. Therefore, in the present study, effect of heat input as well as preheating temperature on the characteristics of the HAZ in submerged arc-welded high-strength low alloy (HSLA) pipeline steel was studied. Hardness and area of HAZ were observed and analyzed as HAZ characteristics. Heat input of the process was varied by changing the voltage, welding speed, wire feed rate and contact tube to work distance. Experiments were designed using central composite rotatable design (CCRD) approach, and using response surface methodology (RSM), process modeling was done. For the purpose of single- as well as multi-characteristic optimization, desirability approach was used. Relationship of heat input and critical cooling rate with HAZ characteristics and its microstructure was also revealed. Inclusion of preheating temperature led to significant improvement in the HAZ characteristics of the weld.

Keywords

Heat input Cooling time Heat affected zone Desirability Submerged arc welding Optimization 

References

  1. 1.
    Sharma S K and Maheshwari S J Mech Sci Technol 31 (2017) 1383.  https://doi.org/10.1007/s12206-017-0238-6.CrossRefGoogle Scholar
  2. 2.
    American Petroleum Institute API Specification 5L, 45th Edition, API Publishing Services, Washington DC (2012).Google Scholar
  3. 3.
    Houldcroft P T Submerged-Arc Welding (Second Edition), Woodhead Publishing, Sawston (1989).Google Scholar
  4. 4.
    Sharma S K and Maheshwari S J Nat Gas Sci Eng 38 (2017) 203.  https://doi.org/10.1016/j.jngse.2016.12.039.CrossRefGoogle Scholar
  5. 5.
    Wang B, Xu Y, Hu J, Zhang s, Cui C, Lan H Trans Indian Inst Met (2018)  https://doi.org/10.1007/s12666-018-1382-0.CrossRefGoogle Scholar
  6. 6.
    Yin L, Wang J, Chen X, Liu C, Siddiquee A N, Wang G, Yao Z Weld World (2018).  https://doi.org/10.1007/s40194-018-0582-x.CrossRefGoogle Scholar
  7. 7.
    Zhang T, Zhao W, Deng Q and Jiang W Int J Hydrogen Energy 42 (2017) 25102.  https://doi.org/10.1016/j.ijhydene.2017.08.081.CrossRefGoogle Scholar
  8. 8.
    Sharma L and Chhibber R Int J Press Vessel Pip 165 (2018) 193.  https://doi.org/10.1016/j.ijpvp.2018.06.013.CrossRefGoogle Scholar
  9. 9.
    Yang M, Liu Y, Zhang, Xiang D Trans Indian Inst Met (2018).  https://doi.org/10.1007/s12666-018-1379-8.CrossRefGoogle Scholar
  10. 10.
    Poorhaydari K, Patchett B M and Ivey D G Weld J 84 (2005) 149–s.Google Scholar
  11. 11.
    Gunaraj V and Murugan N Weld J 81 (2002) 45–s.Google Scholar
  12. 12.
    Gunaraj V and Murugan N J Mater Process Technol 95 (1999) 246.CrossRefGoogle Scholar
  13. 13.
    Jindal S, Chhibber R and Mehta N P Proc IMechE Part B J Eng Manuf 228 (2015) 82.  https://doi.org/10.1177/0954405413495846 CrossRefGoogle Scholar
  14. 14.
    Kiran D V, Basu B and De A J Mater Process Technol 212 (2012) 2041. https://doi.org/10.1016/j.jmatprotec.2012.05.008.CrossRefGoogle Scholar
  15. 15.
    Adak D K, Mukherjee M and Pal T K Trans Indian Inst Met 68 (2015) 839.  https://doi.org/10.1007/s12666-015-0518-8.CrossRefGoogle Scholar
  16. 16.
    Joshi J R, Potta M, Adepu K, Katta R K, Gankidi MR Trans Indian Inst Met 70 (2017) 69.  https://doi.org/10.1007/s12666-016-0861-4.CrossRefGoogle Scholar
  17. 17.
    Saha A and Mondal S C Trans Indian Inst Met 70 (2017) 1491.  https://doi.org/10.1007/s12666-016-0945-1.CrossRefGoogle Scholar
  18. 18.
    Kruglova A A, Orlov V V and Sharapova D M Metallurgist 58 (2015) 806.  https://doi.org/10.1007/s11015-015-9999-2.CrossRefGoogle Scholar
  19. 19.
    Kumar S and Nath S K Trans Indian Inst Met 70 (2017) 239.  https://doi.org/10.1007/s12666-016-0880-1.CrossRefGoogle Scholar
  20. 20.
    Li L, Wang Y, Han T and Li C Int J Miner Metall Mater 18 (2011) 419.  https://doi.org/10.1007/s12613-011-0456-3.CrossRefGoogle Scholar
  21. 21.
    Permyakov I L, Frantov I I, Bortsov A N and Mentyukov K Y Metallurgist 55 (2012) 925.  https://doi.org/10.1007/s11015-012-9523-x.CrossRefGoogle Scholar
  22. 22.
    Li H, Liang J-L, Feng Y-L and Huo D-X Rare Met 33 (2014) 493.  https://doi.org/10.1007/s12598-014-0344-x.CrossRefGoogle Scholar
  23. 23.
    Yang J R, Lion S H Sci Technol Weld Join 2 (1997) 119.  https://doi.org/10.1179/stw.1997.2.3.119.CrossRefGoogle Scholar
  24. 24.
    DuPont J N, Marder A R Welding Res Supplement, December (1995) 406s–416s.Google Scholar
  25. 25.
    Easterling K E (1992) Introduction to the physical metallurgy of welding, Butterworth Heinemann, Oxford.Google Scholar
  26. 26.
    Montgomery D C Design and analysis of experiments, Wiley, New York (2013).Google Scholar
  27. 27.
    Sharma S K, Maheshwari S and Rathee S J Manuf Sci Prod 16 (2016) 141.  https://doi.org/10.1515/jmsp-2016-0009.CrossRefGoogle Scholar
  28. 28.
    Derringer G and Suich R J Qual Technol 12 (1980) 214.CrossRefGoogle Scholar
  29. 29.
    Yee S V, Hussain Z, Anasyida AS, Syukron M, Almanar I P Adv Mater Res 858 (2013) 3.  https://doi.org/10.4028/www.scientific.net/amr.858.3.CrossRefGoogle Scholar
  30. 30.
    Saini N, Pandey C and Mahapatra M M Trans Indian Inst Met 70 (2017) 1.  https://doi.org/10.1007/s12666-017-1145-3.CrossRefGoogle Scholar
  31. 31.
    Kumar H, Manna A and Kumar R Trans Indian Inst Met 71 (2018) 231.  https://doi.org/10.1007/s12666-017-1159-x.CrossRefGoogle Scholar

Copyright information

© The Indian Institute of Metals - IIM 2018

Authors and Affiliations

  1. 1.Mechanical Engineering DepartmentThapar Institute of Engineering and TechnologyPatialaIndia
  2. 2.Division of Manufacturing Processes and Automation EngineeringNetaji Subhas University of TechnologyDwarkaIndia

Personalised recommendations