Reducing Distortion and Residual Stress Using Dynamically Controlled Low Stress No Distortion and Its Influence on Fatigue Crack Growth Properties of Steel Welded Joints
- 17 Downloads
The need for reducing weld distortion and residual stress in welded thin plate structures has led to the development of stress-relieving methods. In-process welding technique using dynamically controlled low stress no distortion (DC-LSND) has been increasingly utilized for reducing distortion. The present investigation aims to study the effect of DC-LSND on distortion, residual stress, strength and fatigue crack growth behavior in steel weld joints. The DC-LSND treatments were carried out by quenching the weld metal region behind the welding torch using cryogenic liquid nitrogen. The sequence of tests was performed including distortion measurement, microstructure examination, hardness test, tensile test, residual stress measurement and fatigue crack growth test combined with SEM examination. Results showed that DC-LSND treatments reduced out-of-plane distortions accompanied by increasing strength and a hardness value of the weld joints and these improved mechanical properties are associated with weld microstructures. The modified DC-LSND treatment is most effective in reducing out-of-plane distortion. Another important finding in this research is that DC-LSND treatments improve fatigue crack growth performance of the weld joints which could be related to weld residual stress.
KeywordsDC-LSND Distortion Residual stress Fatigue Welding
This work was financially supported by Doctoral Grant on Ministry of Research, Technology and High Education of Indonesia.
- 2.Conrardy C, Huang T D, Harwig D, Dong P, Kvidahl L, Evans N, and Treaster AC, J Sh Prod 22 (2006) 239.Google Scholar
- 6.Ma N, Wang J, and Okumoto Y, Int J Adv Manuf Technol 84 (2016) 1371.Google Scholar
- 8.Subeki N, Ilman M N, and Iswanto P T, in Proceedings of the International Conference Engineering Science and Nanotech, Solo, Indonesia (2017) 030057.Google Scholar
- 12.Yang C, Zhang H, Zhong J, Chen Y, and Chen S, Int J Adv Manuf Technol (2014) 421.Google Scholar
- 17.Holder R, Larkin N, Kuzmikova L, Huijun L, and Pan Z, J N, in Proceedings of 56th WTIA Annual Conference, Wollongong, China (2011) 1.Google Scholar
- 18.Bishop R J S R E, Modern Physical Metallurgy dan Materials Engineering, Jordan Hill, Oxford (1999).Google Scholar
- 19.Wibowo H, Ilman M N, Iswanto P T, and Muslih M R, Int J Mech Mechatronics Eng 17 (2017).Google Scholar
- 24.Guan Q, Guo D L, and Li C Q, Weld. World 8 (1994) 49.Google Scholar