Finite Element Analysis (FEA) of Perpendicular Plating Versus Conventional Plating in Mandibular Symphysis Fracture

  • 69 Accesses


Aim and Objective

To perform the comparative finite element analysis of conventional and perpendicular plating in mandibular symphyseal fracture.

Material and Method

Two FE model of mandible were developed and symphyseal fracture was created in both of them. Each fractured model was fixed by conventional method 2.0 mm system and perpendicular method 2.00 mm system. Stresses which developed in plates and mandible after application of load were observed in the model.


Results of the study indicated that perpendicular method was more resistant to displacing forces and rest of the parameters was within the permitted limits.


Perpendicular method was reasonably effective as conventional method of fixation for mandibular symphyseal fracture.

This is a preview of subscription content, log in to check access.

Access options

Buy single article

Instant unlimited access to the full article PDF.

US$ 39.95

Price includes VAT for USA

Subscribe to journal

Immediate online access to all issues from 2019. Subscription will auto renew annually.

US$ 99

This is the net price. Taxes to be calculated in checkout.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7


  1. 1.

    Holmes PJ, Koehler J, McGwin GJ (2004) Frequency of maxillofacial injuries in all-terrain vehicle collisions. J Oral Maxillofac Surg 62:697–701

  2. 2.

    Muhonen J, Leikomaa H (2010) Treatment of mandibular fracture. Duodecim 126:712–716

  3. 3.

    Van den Bergh B, Heymans M, Duvekot F, Forouzanfar T (2012) Treatment and complications of mandibular fractures: a 10-year analysis. J Craniomaxillofac Surg 40:108–111

  4. 4.

    Champy M, Lodde JP, Jaeger JH, Wilk A, Gerber JC (1976) Mandibular osteosynthesis according to the Michelet technic: justification of new material: Results. Rev Stomatol Chir Maxillofac 77:252

  5. 5.

    Bolourian R, Lazow S, Berger J (2002) Transoral 2.0-mm miniplate fixation of mandibular fractures plus 2 weeks’ maxillomandibular fixation: a prospective study. J Oral Maxillofac Surg 60:167–170

  6. 6.

    Bakke M (2006) Bite force and occlusion. Semin Orthdontics 12:120–126

  7. 7.

    Hogg NJ, Stewart TC, Armstrong JE (2000) Epidemiology of maxillofacial injuries at trauma hospitals in Ontario, Canada, between 1992 and 1997. J Trauma 49:425–432

  8. 8.

    Charnley JC (1948) Positive pressure in arthrodesis of knee joint. J Bone Joint Surg 30(3):478–486

  9. 9.

    Goyal M, Jhamb A, Chawla S et al (2012) A comparative evaluation of fixation techniques in anterior mandibular fractures using 2.0 mm monocortical titanium miniplates versus 2.4 mm cortical titanium lag screws. J Maxillofac Oral Surg 11:442–450

  10. 10.

    Neumayer B (1991) Optimizing titanium osteosynthesis miniplates: some basic considerations. Dtsch Z Mund Kiefer Gesichtschir 15(4):265–270

  11. 11.

    Heinl T, Neumayer B (1987) Preformed titanium osteosynthesis plate for fractures of the mandibular angle. Schweiz Monatsschr Zahnmed 97(8):985–989

  12. 12.

    Collins CP, Pirinjian-Leonard G, Tolas A, Alcalde R (2004) A prospective randomized clinical trial comparing 2.0-mm locking plates to 2.0-mm standard plates in treatment of mandible fractures. J Oral Maxillofac Surg 62(11):1392–1395

  13. 13.

    Lamphier J, Ziccardi V, Ruvo A (2003) Complications of mandibular fractures in an urban teaching center. J Oral Maxillofac Surg 61:745

  14. 14.

    Mathog RH, Toma V, Clayman L, Wolf S (2000) Nonunion of the mandible: an analysis of contributing factors. J Oral Maxillofac Surg 58:746–752

  15. 15.

    Arbag H, Korkmaz HH, Ozturk K, Uyar Y (2008) Comparative evaluation of different miniplates for internal fixation of mandible fractures using finite element analysis. J Oral Maxillofac Surg 66:1225–1232

  16. 16.

    Hart RT, Hennebel VV, Thongpreda N et al (1992) Modeling the biomechanics of the mandible: a three-dimensional finite element study. J Biomech 25:261

  17. 17.

    Korioth TW, Versluis A (1997) Modeling the mechanical behavior of the jaws and their related structures by finite element (FE) analysis. Crit Rev Oral Biol Med 8:90

  18. 18.

    Vollmer D, Meyer U, Joos U, Vegh A, Piffko J (2000) Experimental and finite element study of a human mandible. J Cranio-Maxillofac Surg 28:91–96

  19. 19.

    Kimura A, Nagasao T, Kaneko T, Miyamoto J, Nakajima T (2006) A comparative study of most suitable miniplate fixation for mandibular symphysis fracture using a finite element model. Keio J Med 55:1

  20. 20.

    Tams J, Van Loon JP, Otten B (2001) A computer study of biodegradable plates for internal fixation of mandibular angle fractures. J Oral Maxillofac Surg 59:404

  21. 21.

    Cox T, Kohn MW, Impelluso T (2003) Computerized analysis of resorbable polymer plates and screws for the rigid fixation of mandibular angle fractures. J Oral Maxillofac Surg 61:481

  22. 22.

    Tams J, Otten B, van Loon JP, Bos RR (1999) A computer study of fracture mobility and strain on biodegradable plates used for fixation of mandibular fractures. J Oral Maxillofac Surg 57(8):973–981 discussion 81-2

  23. 23.

    An YH, Draughn RA (1999) Mechanical testing of bone and the bone implant interface, 1st edn. CRC Press, London, p 43

  24. 24.

    Wagner A, Krach W, Schicho K et al (2002) A 3-dimensional finite-element analysis investigating the biomechanical behavior of the mandible and plate osteosynthesis in cases of fractures of the condylar process. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 94(6):678–686

  25. 25.

    Ahmed SS, Bhardwaj S, Ansari MK, Farooq O, Khan AA (2017) Role of 1.5 mm microplates in treatment of symphyseal fracture of mandible: a stress analysis based comparative study. J Oral Biol Craniofac Res 7(2):119–122

Download references

Author information

Correspondence to Sajjad Abdur Rahman.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Arora, L., Bhardwaj, S., Hashmi, G.S. et al. Finite Element Analysis (FEA) of Perpendicular Plating Versus Conventional Plating in Mandibular Symphysis Fracture. J. Maxillofac. Oral Surg. 19, 143–148 (2020).

Download citation


  • Perpendicular plates
  • Finite element analysis
  • Mandibular symphysis fracture
  • Conventional plating