Advertisement

Silicon

, Volume 11, Issue 2, pp 713–719 | Cite as

TiN and TiCN Coated Stainless Steel 316 Ultrosonic Cavitation Probe for High Temperature Application

  • G. KumaresanEmail author
  • E. Machlin Jawahar
  • P. Senthilkumar
Original Paper
  • 33 Downloads

Abstract

Ultrasonic Cavitation Probe Assisted method in Stir Casting is used to produce metal matrix nano-composites (MMNCs) in bulk quantity with uniform distribution of nano particles. The uniform distribution of nano-particles is important aspect to enhance overall properties of composite materials. Here the ultrasonic waves are transferred to the casting mixture through ultrasonic horn (or) probe. During this process the thermal degradation of probe takes place, due to long period at high temperature, resulting in reduction of probe efficiency. Stainless steel 316 is taken as replacing material for existing super alloy probes like titanium and nickel based alloys for its valid properties and cost. The experiments are carried out to test the efficiency of the probe, without and with two different types of coatings such as TiN and TiCN on the SS 316 probe for various thickness using Physical Vapor Deposition (PVD) Technique. After coating on SS 316 various tests such as wear resistance, hardness, microstructure analysis, thermal conductivity and experimental analysis are done. The TiCN coating is more efficient than TiN coating.

Keywords

Ultrosonic cavitation Coatings Wear Mechanical degradation 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Cao G, Choi H, Konishi H, Kou S, Lakes R, Li X (2008) Mg–6Zn/1.5%SiC nanocomposites fabricated by ultrasonic cavitation-based solidification processing. J Mater Sci 43:5521– 5526CrossRefGoogle Scholar
  2. 2.
    Hu H, Onyebueke L, Abatan A (2010) Characterizing and modeling mechanical properties of nanocomposites-review and evaluation. J Miner Mater Charact Eng 9:275–319Google Scholar
  3. 3.
    Soltani N, Sadrnezhaad S K, Bahrami A (2014) Manufacturing wear-resistant 10Ce-TZP/Al2O3 nanoparticle aluminum composite by powder metallurgy processing. Mater Manuf Process 29:1237–1244CrossRefGoogle Scholar
  4. 4.
    Yang Y, Lan J, Li X (2004) Study on bulk aluminum matrix nano-composite fabricated by ultrasonic dispersion of nano-sized SiC particles in molten aluminum alloy. Mater Sci Eng A 380:378–383CrossRefGoogle Scholar
  5. 5.
    Parthasarathi N L, Duraiselvam M (2010) Improvement of high temperature wear resistance of AISI 316 ASS through NiCrBSiCFe plasma spray coating. J Miner Mater Charact Eng 9:653–670Google Scholar
  6. 6.
    Cao X Q, Vassen R Stoever D (2004) Ceramic materials for thermal barrier coatings. J Eur Ceram Soc 24:1–10CrossRefGoogle Scholar
  7. 7.
    Kennedy D M, Hashmi M S J (1998) Methods of wear testing for advanced surface coatings and bulk materials. J Mater Process Technol 77:246–253CrossRefGoogle Scholar
  8. 8.
    Padture P N, Gell M, Jordan G H (2002) Thermal barrier coatings for gas-turbine engine applications. Am Assoc Adv Sci 296:280–284Google Scholar
  9. 9.
    Deaquino-Lara R, Soltani N, Bahrami A, Gutiérrez-Castañeda E, García-Sánchez E, Hernandez-Rodríguez MAL (2015) Tribological characterization of Al7075–graphite composites fabricated by mechanical alloying and hot extrusion. Mater Des 67:224– 231CrossRefGoogle Scholar
  10. 10.
    Soltani N, Nodooshan H R J, Bahrami A, Pech-Canul M I, Liu W, Wub G (2014) Effect of hot extrusion on wear properties of Al–15 wt.% Mg2Si in situ metal matrix composites. Mater Des 53:774–781CrossRefGoogle Scholar

Copyright information

© Springer Nature B.V. 2018

Authors and Affiliations

  • G. Kumaresan
    • 1
    Email author
  • E. Machlin Jawahar
    • 1
  • P. Senthilkumar
    • 2
  1. 1.Department of Production Technology, MIT CampusAnna UniversityChennaiIndia
  2. 2.Department of Automobile Engineering, MIT CampusAnna UniversityChennaiIndia

Personalised recommendations