Advertisement

Silicon

, Volume 11, Issue 2, pp 603–613 | Cite as

Improving Heat Transfer Properties of DS furnace by the Geometrical Modifications for Enhancing the Multi Crystalline Silicon Ingot (mc-Si) Quality Using Transient Simulation

  • S. G. Nagarajan
  • M. Srinivasan
  • K. Aravinth
  • P. RamasamyEmail author
Original Paper
  • 29 Downloads

Abstract

Heat transfer plays a main role on Directional Solidification (DS) process that determines the multi-crystalline silicon (mc-Si) ingot quality. The 2D axi-symmetric model based numerical simulations have been carried out to analyze the heat transfer properties of the DS furnace and to study the thermal effects on mc-Si ingot during the solidification process. For enhancing the heat transfer properties of the DS system and the quality of the mc-Si ingot, the conventional DS furnace was subjected to three types of modifications. The simulation has been made for conventional and modified furnaces and their results were compared and analyzed which confirms that the geometrical modification has influenced the thermal distribution, melt-crystal interface, growth rate, thermal stress and dislocation density of the mc-Si ingot. The following modifications have been taken in conventional DS furnace in sequence: a) For lowering the axial and radial temperature distributions, the bottom insulation was modified (DS-1). b) For melt-crystal interface optimization, the heat exchanger block is grooved in the center part (DS-2). c) Finally, the grooved surface has been subjected to Ar gas flow (DS-3). The evaluations are performed on conventional, DS-1, DS-2 and DS-3 furnaces and their results such as axial-radial temperature distributions, melt-crystal interface, growth rate and thermal stress and dislocation densities are compared and analyzed. The results revealed that the modified furnaces give lower thermal stress and dislocation densities than the conventional furnace. The lower thermal stress with lower dislocation density at the end of the solidification process can prevent the multiplication of dislocations during the cooling process that lead to a good quality mc-Si ingot.

Keywords

Computer simulation Directional solidification Multi-crystalline silicon Geometrical modifications von Mises stress 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Acknowledgements

This work is supported by Ministry of New and Renewable Energy (MNRE), the Government of India (Order No: 31/58/2013-2014/PVSE2)

References

  1. 1.
    Gao B, Nakano S, Harada H, Myamura Y, Sekiguchi T, Kakimoto K (2012) Reduction of polycrystalline grains region near the crucible wall during seeded growth of monocrystalline silicon in a unidirectional solidification furnace. J Cryst Growth 352:47–52.  https://doi.org/10.1016/j.jcrysgro.2011.11.084 CrossRefGoogle Scholar
  2. 2.
    Sopory B, Rupnowski P, Mehta V, Budhraja V, Johnston S, Call N, Moulinho H, Al-Jassim M (2009) Performance Limitations of mc-Si Solar Cells Caused by Defect Clusters Conference paper NRWL/CP-520-45012Google Scholar
  3. 3.
    Ganesan NS, Manickam S, Karuppanan A, Perumalsamy R (2016) Simulation analysis on impurity distribution in mc-Si grown by directional solidification for solar cell applications . Int J Mater Res 107:1–9.  https://doi.org/10.3139/146.111375 CrossRefGoogle Scholar
  4. 4.
    Wang TY, Hsu SL, Fei CC, Yei KM, Hsu WC, Lan CW (2009) Grain control using spot cooling in multi-crystalline silicon crystal growth 311, 263–267.  https://doi.org/10.1016/j.jcrysgm.2008.10.064
  5. 5.
    Zhou N, Lin M, Zhou L, Hu Q, Fang H, Wang S (2013) A modified cooling process in directional solidification of multicrystalline silicon. J Cryst Growth 381:22–26. https://doi.org/10.106/j.jcrysgro.2013.06.036 CrossRefGoogle Scholar
  6. 6.
    Wei J, Zhang H, Zheng L, Wang C, Zhao B (2009) Modeling and improvement of silicon ingot directional solidification for industri al production systems. Sol Energy Mater Sol Cells 93:1531–1539.  https://doi.org/10.1016/j.solmat.2009.04.001 CrossRefGoogle Scholar
  7. 7.
    Qi X, Qinghua Y, Zhao W, Liang X, Zhang J, Liu L (2014) Improved seeded directional solidification process for producing high-efficiency multi-crystalline silicon ingots for solar cells. Sol Energy Mater Sol Cells 130:118–123.  https://doi.org/10.1016/j.solmat.2014.06.042 CrossRefGoogle Scholar
  8. 8.
    Black A, Medina J, Pineiro A, Dieguez E (2012) Optimizing seeded casting of mono-like silicon crystals through numerical simulation. J Crystal Growth 353:12–16.  https://doi.org/10.1016/J.JCRYSGRO.2012.04.033 CrossRefGoogle Scholar
  9. 9.
    Fang HS, Wang S, Zhou L, Zhou NG, Lin MH (2012) Influence of furnace design on the thermal stress during directional solidification of multicrystalline silicon. J Cryst Growth 346:5–11.  https://doi.org/10.1016/j.jcrysgro.2012.02.032 CrossRefGoogle Scholar
  10. 10.
    Chen L, Dai B (2012) Optimization of power consumption on silicon directional solidification system by using numerical simulations. J Crystal Growth 354:86–92.  https://doi.org/10.1016/j.jcrysgro.2012.06.010 CrossRefGoogle Scholar
  11. 11.
    Ma X, Zheng L, Zhang H, Zhao B, Wang C, Xu F (2011) Thermal system design and optimization of an industrial silicon directional solidification system. J Cryst Growth 318:288–292. https://doi.org/10.1016j.jcrysgro.2010.10.102 CrossRefGoogle Scholar
  12. 12.
    Srinivasan M, Karuppasamy P, Ramasamy P, Baru AK (2016) Numerical Modelling on Stress and Dislocation Generation in MultiCrystalline Silicon during Directional Solidification for PV Applications, Electronic Material LettersGoogle Scholar
  13. 13.
    Ryningen B, Stokkan G, Kivambe M, Ervik T, Lohne O (2011) Growth of dislocation clusters during directional solidification of multicrystalline silicon ingots. Acta Mater 59:7703–7710.  https://doi.org/10.1016/j.actamat.2011.09.002 CrossRefGoogle Scholar
  14. 14.
    Kalaev VV, Evstratov I (2003) J Cryst Growth 249:87CrossRefGoogle Scholar
  15. 15.
    Smirnova OV, Kalaev VV (2007) J Cryst Growth 303:141CrossRefGoogle Scholar
  16. 16.
    Fainberg* J, Leister H-J (1996) Finite volume multigrid solver for thermo-elastic stress analysis in anisotropic materials. Comput Methods Appl Mech Eng 137:167–174CrossRefGoogle Scholar
  17. 17.
    Zhiyong W, Zhong G, Zhou X, Zhang Z, Wang Z, Chena W, Huanga X (2016) Upgrade of the hot zone for large-size high-performance multi-crystalline silicon ingot casting. J Cryst Growth 441:58–63.  https://doi.org/10.1016/j.jcrysgro.2016.02.012 CrossRefGoogle Scholar
  18. 18.
    Nakano S, Chen XJ, Gao B, Kakimoto K (2011) Numerical analysis of cooling rate dependence on dislocation density in multicrystalline silicon for solar cells. J Cryst Growth 318:280–282.  https://doi.org/10.1016/j.jcrysgro.2010.11.009 CrossRefGoogle Scholar
  19. 19.
    Xuejiang C, Nakono S, Liu L, Kakimoto K (2008) Numerical investigation on thermal stress and Dislocation density in silicon ingot during the solidification process, Reports of Research Institute for Applied Mechanics, Kyushu University, No. 135, 45–52Google Scholar
  20. 20.
    Ma W, Zhong G, Sun L, Yu Q, Huang X, Liu L (2012) Influence of an insulation partition on a seeded directional solidification process for quasi-single crystalline silicon ingot for high-efficiency solar cells. Sol Energy Mater Sol Cells 100:231–238.  https://doi.org/10.1016/j.solmat.2012.01.024 CrossRefGoogle Scholar
  21. 21.
    Qinghua Y, Liu L, Ma W, Zhong G, Huang X (2012) Local design of the hot-z one in an industrial seeded directional solidification furnace for quasi-single crystalline silicon ingots. J Cryst Growth 358:5–11.  https://doi.org/10.1016/j.jcrysgro.2012.07.039 CrossRefGoogle Scholar
  22. 22.
    Zhang H, Zheng L, Ma X, Zhao B, Wang C, Xu F (2011) Nucleation and bulk growth control for high efficiency silicon ingot casting. J Cryst Growth 318:283–287. https://doi.org/j.jcrysgro.2010.10.103 CrossRefGoogle Scholar
  23. 23.
    Yang X, Ma W, Lv G, Wei K, Luo T, Chen D (2014) A modified vacuum directional solidification system of multicrystalline silicon based on optimizing for heat transfer. J Cryst Growth 400:7–14.  https://doi.org/10.1016/j.jcrysgro.2014.04.025 CrossRefGoogle Scholar
  24. 24.
    Nakajima K, Kutsukake K, Fujiwara K, Morishita K, Ono S (2011) Arrangement of dendrite crystals grown along the bottom of Si ingot using the dendritic casting method by controlling thermal conductivity under crucibles. J Cryst Growth 319:13–18.  https://doi.org/10.1016/j.jcrysgro.2011.01.069 CrossRefGoogle Scholar
  25. 25.
    Kvande R, Mjos O, Ryningen B (2005) Growth rate and impurity distribution in multicrystalline silicon for solar cells. Mater Sci Eng A 413-414:5455–549.  https://doi.org/10.1016/j.msea.2005.09.035 CrossRefGoogle Scholar
  26. 26.
    Luo T, LV Q, Ma W, Wei K, Yang X, Li S (2013) Numerical and experimental study of vacuum directional solidification purification process for SoG-Si in metallurgicalroute. J Cryst Growth 384:122–128.  https://doi.org/10.1016/j/jcrysgro.2013.09.020 CrossRefGoogle Scholar
  27. 27.
    Bei W, Stoddard N, Ma R, Clark R (2008) Bulk multicrystalline silicon growth for photovoltaic(PV) application. J Cryst Growth 310:2178–2184.  https://doi.org/10.1016/j/jcrysgro.2007.11.194 CrossRefGoogle Scholar
  28. 28.
    Miyazawa H, Liu L, Kakimoto K (2009) Numerical investigation of the influence of material property of a crucible on interface shape in a unidirectional solidification process. Cryst Growth Des 9:267–272.  https://doi.org/10.1021/cg800435d CrossRefGoogle Scholar
  29. 29.
    Chen XJ, Nakano S, Liu LJ, Kakimoto K (2008) Study on thermal stress in a silicon ingot during a unidirectional solidification process. J Cryst Growth 310:4330–4335.  https://doi.org/10.1016/j.jcrysgro.2008.07.027 CrossRefGoogle Scholar
  30. 30.
    Zheng L, Ma X, Hu D, Zhang H, Zhang T, Wan Y (2011) Mechanism and modeling of silicon carbide formation and engulfment in industrial silicon directional solidification growth. J Cryst Growth 318:313–317.  https://doi.org/10.1016/j.jcrysgro.2010.11.141 CrossRefGoogle Scholar
  31. 31.
    Zhiyong W, Zhong G, Zhang Z, Zhou X, Wang Z, Huang X (2015) Optimization of the high-performance multi-crystalline silicon solidification process by insulation partition design using transient global simulations. J Cryst Growth 426:110–116.  https://doi.org/10.1016/j.jcrysgro.2015.05.021 CrossRefGoogle Scholar
  32. 32.
    Olga V, Smirnova * V, Mamedov M, Kalaev VV (2014) Numerical modeling of stress and dislocations in Si ingots grown by seed-directional solidification and comparison to experimental data. Crystal Growth Des 14:5532–5536.  https://doi.org/10.1021/cg500736j CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media B.V., part of Springer Nature 2018

Authors and Affiliations

  • S. G. Nagarajan
    • 1
  • M. Srinivasan
    • 1
  • K. Aravinth
    • 1
  • P. Ramasamy
    • 1
    Email author
  1. 1.SSN Research CenterSSN College of EngineeringChennaiIndia

Personalised recommendations