Abstract
12 vol%WCp/2024Al composite was fabricated from mixed powders by hot-pressing at various temperatures. Investigation of the interfacial reaction between the WC phase and the Al alloy matrix was performed by X-ray diffraction (XRD), transmission electron microscope (TEM) and energy dispersive spectroscopy (EDS). A multiple layer interface structure, which is composed of Al/WAl12/Al4C3/WC, is found to form by the interfacial reaction during hot-pressing. Further study shows that the Al4C3 layer forms along with a given crystal orientation of WC phase and might retard the interfacial reaction process.
Similar content being viewed by others
References
Hoseini M, Meratian M. Tensile properties of in situ aluminium–alumina composites. Mater Lett. 2005;59(27):3414.
Zu L, Luo S. Study on the powder mixing and semi-solid extrusion forming process of SiCp/2024Al composites. J Mater Process Tech. 2001;114(3):189.
Ceschini L, Minak G, Morri A. Tensile and fatigue properties of the AA6061/20 vol% Al2O3p and AA7005/10 vol% Al2O3p composites. Compos Sci Technol. 2006;66(2):333.
Shin DS, Lee JC, Yoon EP. Effect of the processing methods on the formation of Al4C3 in SiCp/2024 Al composites. Mater Res Bull. 1997;32(9):1155.
Lee JC, Park SB, Seok HK. Prediction of Si contents to suppress the interfacial reaction in the SiCp/2014 Al composites. Acta Mater. 1998;46(8):2635.
Noble B, Trowsdale AJ, Harris SJ. Low-temperature interface reaction in aluminium–silicon carbide particulate composites produced by mechanical alloying. J Mater Sci. 1997;32(22):5969.
Contreras A, Angeles-Chávez C, Flores O. Structural, morphological and interfacial characterization of Al–Mg/TiC composites. Mater Charact. 2007;58(8–9):685.
Ren SB, He XB, Qu XH. Effect of controlled interfacial reaction on the microstructure and properties of the SiCp/Al composites prepared by pressureless infiltration. J Alloy Comp. 2008;455(1–2):424.
Kim Y, Lee JC. Processing and interfacial bonding strength of 2014 Al matrix composites reinforced with oxidized SiC particles. Mater Sci Eng A. 2006;420(1–2):8.
Wang L, Hu J, Li ZJ. Fracture behavior of aluminum borate whisker-reinforced aluminum alloy 6061 composite. Mater Sci Eng A. 2008;497(1–2):358.
Badini C, La Vecchia GM, Fino P, Valente T. Forging of 2124/SiCp composite. J Mater Process Tech. 2001;116(2–3):289.
Tang F, Anderson IE, Gnaupel-Herold T, Prask H. Pure Al matrix composites produced by vacuum hot pressing: tensile properties and strengthening mechanisms. Mater Sci Eng. 2004;383(2):362.
Wang LD, Fei WD, Yao CK. Effect of interfacial reaction on the thermal expansion behavior of β-eucryptite particle and aluminum borate whisker reinforced 6061 aluminum alloy composite. Mater Sci Eng A. 2002;336(1–2):110.
Kainer KU. Metal matrix composites. Custom-made Materials for Automotive and Aerospace Engineering. Weinheim: Wiley; 2006. 356.
Torraba JM, da Costa CE, Velasco F. P/M aluminum composites: an overview. J Mater Process Tech. 2003;133(1–2):206.
Liang QS, Mao CH, Yang J. Effects of powder hot-pressing process on mechanical properties of WCp/2024Al composites. J Mater Eng. 2011;(12):63.
Acknowledgments
This work was financially supported by the Program for Changjiang Scholars and Innovative Research Teams in University (PCSIRT) (No. IRT0713).The authors would like to thank Professor Hui-Pin Duan from Beijing University of Aeronautics and Astronautics for his outstanding TEM and EDS works during the course of this study.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Mao, CH., Sun, XD., Liang, QS. et al. Interfacial reaction process of the hot-pressed WC/2024Al composite. Rare Met. 32, 397–401 (2013). https://doi.org/10.1007/s12598-013-0116-z
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12598-013-0116-z