Advertisement

Journal of the Geological Society of India

, Volume 93, Issue 4, pp 443–454 | Cite as

Mineralogical and Chemical Characterization of Low Grade Iron Ore Fines from Barsua Area, Eastern India with Implications on Beneficiation and Waste Utilization

  • Satyananda PatraEmail author
  • Abhyarthana Pattanaik
  • Akella Satya Venkatesh
  • Rayasam Venugopal
Research Article
  • 8 Downloads

Abstract

The consumption of iron ore has increased rapidly over the past decade due to the tremendous growth of iron and steel industry. The depletion of high grade iron ore resources make it inevitable to utilize the existing low grade iron ores/fines/tailings with effective beneficiation to meet the present specification and demand. Enormous amounts of fines are produced both from the natural geological process as well during the mechanized mining operations which is hitherto in unknown resource present in the form of waste. Beneficiation and utilization of these fines/tailings still remains a challenging task. In order to find out the effective way of utilization of these fines, an in-depth characterization study is essential. A detailed insight into the different mineralogical attributes involving microscopic SEM-EDX, EPMA, XRD, FTIR, TGA, physical and chemical characterization are undertaken on the Barsua iron ores fines. These studies revealed that hematite and goethite are the major iron bearing minerals with gibbsite, kaolinite and quartz present as gangue that makes up the deleterious Al and Si content. Traces of magnetite is also observed along with martite. The liberation size of the sample is found to be below 150 μm. The bulk chemical composition shows around 57.67% Fe, 6.29% Al2O3, 3.52% SiO2 and 6.93% LOI. Based on the detailed characterization, possible routes of beneficiation of the iron ore fines are discussed.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Anderson, K.F.E., Wall, F., Rollinson, G.K. and Moon, C.J. (2014) Quantitative mineralogical and chemical assessment of the Nkout iron ore deposit, Southern Cameroon, Ore Geol. Rev., v.62, pp.25.Google Scholar
  2. Anupam, A., Singh, G., Raghav, P.K. and Suresh, N. (2010) Studies on beneficiation of BHQ samples by different methods, [in] Proceedings of the XI International Seminar on Mineral Processing Technology (MPT — 2010), Jamshedpur, pp.572.Google Scholar
  3. Bhattacharya, H.N., Chakraborty, I., Ghosh, K.K. (2007) Geochemistry of some Banded Iron Formations of the Archaean supracrustals, Jharkhand-Odisha region, India. Jour. Earth Syst. Sci., v. 116, pp.245–259.CrossRefGoogle Scholar
  4. Bikiaris, D., Daniilia, S., Sotiropoulou, S., Katsimbiri, O., Pavlidou, E., Moutsatsou, A.P. and Chryssoulakis, Y. (1999) Ochre-differentiation through micro-Raman and micro-FTIR spectroscopies: application on wall paintings at Meteora and Mount Athos, Greece, Spectrochimica Acta, v.56, pp.3.Google Scholar
  5. Cornell, R.M. and Schwertmann, U. (2003) The Iron Oxides: Structure, Properties, Reactions, Occurrence and Uses, Wiley-VCH GmbH & Co. KGaA, Weinheim, Germany.CrossRefGoogle Scholar
  6. Das, B., Mishra, B.K., Prakash, S., Das, S.K. Reddy, P.S.R. and Angadi, S.I. (2010) Magnetic and ûotation studies of banded hematite quartzite (BHQ) ore for the production of pellet grade concentrate, Internat. Jour. Minerals, Metallurgy, and Materials, v.17, pp.675.CrossRefGoogle Scholar
  7. Das, B., Prakash, S., Das, S.K. and Reddy, P.S.R. (2008) Effective beneficiation of low grade iron ore through jigging operation. Jour. Minerals and Materials Characterisation and Engineering, v. 7(1), pp.27.CrossRefGoogle Scholar
  8. Dash, D., Pradhan, S.S., Jena, M.S., Tripathy, H.K., Mohanty, J.K. and Mohanty, J.N. (2012) Recovery of iron values from BHQ ore beneficiation plant rejects. Jour. Soc. Geoscientists and Allied Technologists (SGAT Bulletin), v. 13, pp.114.Google Scholar
  9. Gadsden, J.A. (1975) Infrared Spectra of Minerals and Related Inorganic Compounds, The Butterworth Group, England..Google Scholar
  10. Gupta, M, Venkatesh, A.S. and Mandre, N.R. (2012). Selective Flocculation of Low-Grade Iron Ore Slimes. SGAT Bull., v.13(2), pp.123–128.Google Scholar
  11. Indian Mineral Year Book, Indian Bureau of Mines, Nagpur, (2012).Google Scholar
  12. Jena, M.S., Mohanty, J.K., Venugopal, R. and Mandre, N.R. (2016) Characterization of low grade PGE ores of Boula-Nuasahi Area, Odisha, India and implication on beneficiation, Ore Geol. Rev., v.72, pp.629.Google Scholar
  13. Jena, M.S., Sahu, P., Dash, P. and Mohanty, J.K. (2013) Beneficiation of limestone plant rejects for value addition. Jour, Hazardous Materials, v.262, pp.218.CrossRefGoogle Scholar
  14. Jena, M.S., Sahu, P., Pradhan, S.S., Mishra, S., Priyadarsini, A., Mohanty, J.K., Tripathy, H.K. and Mohanty, J.N. (2015) Beneficiation of banded hematite quartzite rejects for value addition, Annual Technical Journal of The Institute of Engineers (India), Odisha State Centre, v.56, pp.246.Google Scholar
  15. Mackenzie, R.C. and Berggren, G. (1970) 1st Edition, Differential Thermal Analysis 1, Academic Press, London and New York, pp.271.Google Scholar
  16. Majumder, T., Chakraborty, K.L. (1979) Petrography and petrology of the Precambrian Banded Iron Formation of Orissa, India and reformation of the bands. Sediment. Geol., v.22, pp.243–265.CrossRefGoogle Scholar
  17. Mohanty, J.K., Jena, M.S. and Paul, A.K. (2012) Integrated Mineralogical Characterisation of Banded Iron Ores of Orissa and Its Implications on Beneficiation, Jour. Minerals and Materials Characterization and Engineering, v.11, pp.1133.CrossRefGoogle Scholar
  18. Mohanty, S., Das, B. and Mishra, B.K. (2011) A preliminary investigation into magnetic separation process using CFD. Minerals Engg., v.24, pp.1651.CrossRefGoogle Scholar
  19. Mohapatra, B. K., Singh, P. P., Mishra, P. and Mahanta, K (2008): Detrital iron-ore deposits in the Iron Ore Group of rocks, northern Orissa, eastern India. Australian Jour. Earth Sci., v.55(8), pp.1139–1152.CrossRefGoogle Scholar
  20. Mowla, D., Karimi, G. and Ostadnezhad, K. (2008) Removal of hematite from silica sand ore by reverse flotation techniques. Separation and Purification Technology, v.58, pp.419.CrossRefGoogle Scholar
  21. O’Connor, W.K. and Dahlin, D.C. (1991) Ore mineralogy and physical characteristics of the Sheep Creek prospect, north-central Alaska Range, Ore Geol. Review.s, v.6, pp.153.Google Scholar
  22. Panda, L., Das, B., Rao, D.S., and Mishra, B.K. (2011) Selective ûocculation of banded hematite Quartzite (BHQ) ores, The Open Mineral Processing Jour., v.4, pp.45.Google Scholar
  23. Petruk, W. and Hughson, M.R. (1977) Image Analysis Evaluation of the Effect of Grinding Media on Selective Flotation of two Zinc-Lead-Copper Ores, CIM Bull.-70, v.782, pp.128.Google Scholar
  24. Pradip, (1994) Beneûciation of alumina rich Indian iron ore slimes, Metals, Materials and Processes, v.6, pp.170.Google Scholar
  25. Prasad, J., Venkatesh, A.S., Sahoo, P.R., Singh, S and Sylvestre K. N. (2017) Geological Controls on High-Grade Iron Ores from Kiriburu-Meghahatuburu Iron Ore Deposit, Singhbhum-Orissa Craton, Eastern India. Minerals. v.7(10), pp.197. DOI. https://doi.org/10.3390/min7100197 CrossRefGoogle Scholar
  26. Roy, B. (2010) Utilization of India’s iron ore resources — Present situation and future possibilities, [in] Proceeding of the IX International Seminar on Mineral Processing Technology (MPT-2010), Jamshedpur, pp.535.Google Scholar
  27. Roy, S. (2009) Recovery Improvement of Fine Iron Ore Particles by Multi Gravity Separation, The Open Mineral Processing Journal., v.2, pp.17.CrossRefGoogle Scholar
  28. Roy, S. and Das, A. (2008) Characterization and processing of low grade iron ore slime from Jilling area of India, Mineral Processing and Extractive Metallurgy Rev., v.29, pp.213.CrossRefGoogle Scholar
  29. Roy, S. and Venkatesh. A. S. (2009a). Banded Iron Formation to Blue Dust: Mineralogical and Geochemical constraints from the Precambrian Jilling-Langalata Deposits, Eastern Indian Craton, Applied Earth Science (Trans. Inst. Min. Metall. B), v.118(3–4), pp.178–188.Google Scholar
  30. Roy, S. and Venkatesh, A.S. (2009b) Mineralogy and geochemistry of banded iron formation and iron ores from eastern India with implications on their genesis. Jour. Earth System Sci., v.118 (6), pp.619–641.CrossRefGoogle Scholar
  31. Roy, S., Das, A. and Venkatesh, A.S. (2007) Characterization of Iron Ore from the Jilling Area of Eastern India with a view to Beneficiation, In. Iron Ore Conference, Perth, 20–22 August, pp.1–8.Google Scholar
  32. Roy, S., Das, A. and Venkatesh, A.S. (2008) A comparative mineralogical and geochemical characterization of iron ores from two Indian Precambrian deposits and Krivoy rog deposit, Ukraine: implications for the upgrading of lean grade ore, Applied Earth Science: IMM Trans., Section B, v.117(3), pp.125–147.Google Scholar
  33. Russell, J.D., Parfitt, R.L., Fraser, A.R. and Farmer, V.C. (1974) Surface structures of gibbsite goethite and phosphated goethite, Nature, v.248, pp.220.Google Scholar
  34. Sahoo, H., Kar, B., Rath, S.S., Rao, D.S. and Das, B. (2014) Processing of banded magnetite quartzite (BMQ) ore using flotation techniques, Powder Technology, v.256, pp.285.Google Scholar
  35. Salama, W., Aref, M.El. and Gaupp, R. (2015) Spectroscopic characterization of iron ores formed in different geological environments using FTIR, XPS, Mossbauer spectroscopy and thermo-analyses, Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, v.136, pp.1816.Google Scholar
  36. Schmitt, J. and Flemming, H.C. (1998) FTIR-spectroscopy in microbial and material analysis, Int. Biodeteriorat. Biodegradat., v.41, pp.1.CrossRefGoogle Scholar
  37. Schwertmann, U. and Cornell, R.M. (2006) The Iron Oxides-Structure, Properties, Reactions, Occurrences and Uses, 2nd Edition. Weinheim, Wiley-VCH Verlag GmbH & Co.Google Scholar
  38. Singh, R. and Mehrotra, S.P. (2007) Beneficiation of iron ores for iron and steel making, Steel Tech., v. 1, pp.17.Google Scholar
  39. Upadhyay, R. K., Asokan, S and Venkatesh, A. S., (2011). Mode of occurrence of phosphorous in iron ores of eastern limb, Bonai synclinorium, eastern India. Jour. Geol. Soc. India, v.77(6), pp.549–556.CrossRefGoogle Scholar
  40. Upadhyay, R.K., Venkatesh, A.S. and Roy, S. (2010) Mineralogical Characteristics of Iron Ores in Joda and Khondbond Areas in Eastern India with Implications on Beneficiation. Resour. Geol., v.60(2), pp.203–211.CrossRefGoogle Scholar
  41. Upadhyay, R.K., Roy, S., Venkatesh, A.S., Rao, M.V.S. and Banerjee, P.K. (2009) Relevance of geological aspects and ore mineralogy in selecting beneficiation methods for processing of eastern Indian iron ores, Miner Process Extr. M. (Trans. Inst. Min Metall. C), v.118 (1), pp.49–59.Google Scholar
  42. Upadhyay, R.K., and Venkatesh, A.S., (2006). Current strategies and future challenges on exploration, beneficiation and value addition of iron ore resources with special emphasis on iron ores from eastern India. Applied Earth Science (Trans. Inst. Min. Metall. B), v.115(4), pp.187–195.CrossRefGoogle Scholar
  43. Vempati, R.K., Loeppert, R.H., Sittertz-bhatkar, H. and Burghardt, R.C. (1990) Infrared vibrations of hematite formed from aqueous- and dry-thermal incubation of Si-containing ferrihydrite clays, Clay Miner., v.38(3), pp.294.Google Scholar
  44. Vidyadhar, A., Singh, A.K., Srivastava, A., Nayak, B., Rao, K.V. and Das, A. (2010) Beneficiation of banded hematite quartzite from meghataburu mine, eastern India. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Jamshedpur, pp.583.Google Scholar
  45. Wendlandt, W.Wm. (1986) Thermal Analysis, 3rd Edition, John Wiley & Sons, Incorporated, Texas, USA.Google Scholar
  46. Yuhua, W. and Jianwei, R. (2005) The ûotation of quartz from iron minerals with a combined quaternary ammonium salt. Internat. Jour. Mineral Processing, v.77, pp.116.CrossRefGoogle Scholar
  47. Zhang, W., Honaker, R., Li, Y. and Chen, J. (2014). The importance of mechanical scrubbing in magnetite-concentrate reverse-flotation, Minerals Engg., v.69, pp.133.Google Scholar

Copyright information

© Geological Society of India 2019

Authors and Affiliations

  • Satyananda Patra
    • 1
    Email author
  • Abhyarthana Pattanaik
    • 2
  • Akella Satya Venkatesh
    • 1
  • Rayasam Venugopal
    • 1
  1. 1.Department of Fuel & Mineral EngineeringIndian Institue of Technology (Indian School of Mines)DhanbadIndia
  2. 2.Department of Applied GeologyIndian Institue of Technology (Indian School of Mines)DhanbadIndia

Personalised recommendations