Journal of the Geological Society of India

, Volume 92, Issue 6, pp 732–742 | Cite as

Evaluation of the Effect of Fault on the Stability of Underground Workings of Coal Mine through DEM and Statistical Analysis

  • Arka Jyoti Das
  • Prabhat Kumar MandalEmail author
  • Satya Prakash Sahu
  • Angad Kushwaha
  • Rana Bhattacharjee
  • Subhashish Tewari


The rock mass around an excavation is generally traversed by different geological discontinuities such as faults, folds, slips, joints, etc. Fault is one of the major geological discontinuities which creates lot of difficulties during underground winning of coal. Entire stress regime and ground conditions in the formation are altered in and around the faults. Faults also impose detrimental effects by introducing impurities, including clay and various forms of mineral matter into the coal seams; opening of pathways for the influx of water and gas into the underground workings; displacing the coal seams upward/downwards making the coal seams difficult or sometimes impractical to mine. Appropriate evaluation of the effect of the fault on the stability of the underground workings is a requisite for safe design of the underground mining structures. In this paper, a study has been carried out to assess the effect of the fault on the stability of underground coal mines by numerical simulation with distinct element method (DEM). On the calibrated DEM model, parametric study has been performed by varying the selected parameters, the dip and the friction angles of the fault. The analysis of variance (ANOVA) shows that both the factors have statistically significant effect on the strength of the coal pillar. Similarly, the displacement of the immediate roof and the height of the disturbed strata are evaluated by the DEM modelling and statistical analysis when the fault passes through the middle of the gallery. The results of ANOVA for both cases indicate that the both factors have significant effect on the displacement of the immediate roof and the height of the disturbed strata. It is obtained from the study that the low angle fault causes high instability in the immediate roof. The paper has been supplemented with the field observations where instability in underground roadways of a coal mine in India is caused by the fault. It was observed in VK-7 incline mine of Singareni Collieries Company Limited, India that there was sudden failure of immediate roof of a roadway where a low angle fault crosses the middle of the roadway. The findings of the paper help to understand the behaviour of the coal pillar and the surrounding rock mass in the presence of the fault. The study would also help to take appropriate decisions about the unstable regions of the working safeguarding safety in underground coal mines.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. Anderson, E.M. (1951) The Dynamics of Faulting and Dyke Formation with Applications to Britain, Second ed., Oliver & Boyd, Edinburgh.Google Scholar
  2. Bandis, S.C., Lumsden, A.C. and Barton, N.R. (1983) Fundamentals of rock joint deformation. Internat. Jour. Rock Mech. Min. Sci. & Geomech. Abs., v.20(6), pp.249–268.CrossRefGoogle Scholar
  3. Barton, N. (1973) Review of a new shear-strength criterion for rock joints. Engg. Geol., v.7(4), pp. 287–332.CrossRefGoogle Scholar
  4. Barton N. (1995) The influence of joint properties in modelling jointed rock masses. In: Proc. 8th ISRM Congress. International Society for Rock Mechanics.Google Scholar
  5. Barton, N. (2013) Shear strength criteria for rock, rock joints, rockfill and rock masses: Problems and some solutions. Jour. Rock Mech. Geotech. Engg., v.5(4), pp.249–261.CrossRefGoogle Scholar
  6. Barton, N., Lien, R. and Lunde, J. (1974) Engineering classification of rock masses for the design of tunnel support. Rock Mech., v.6(4), pp.189–236.CrossRefGoogle Scholar
  7. Beer, G. and Poulsen, B.A. (1994) Efficient numerical modelling of faulted rock using the boundary element method. International Jour. Rock Mech. Min. Sci. Geomech. Abs., v.31(5), pp. 485–506.CrossRefGoogle Scholar
  8. Bieniawski, Z.T. (1976) Rock mass classifications in rock engineering. In: Bieniawski, Z.T., (Ed.), Exploration for Rock Engineering, 1. Rotterdam: Balkema, pp.97–106.Google Scholar
  9. Bott, M.H.P. (1959) The mechanics of oblique slip faulting, Geological Magz., v.96, pp.109–117.CrossRefGoogle Scholar
  10. Brady, B.H.G., Brown, E.T. (1993) Rock Mechanics for Underground Mining. Second ed. Chapman & Hall, London.Google Scholar
  11. Cheng, Y.M. (1998) Advancements and improvement in discontinuous deformation analysis. Computers and Geotechnics, v.22(2), pp.153–163.CrossRefGoogle Scholar
  12. Childs, C., Manzocchi, T., Walsh, J.J., Bonson, C.G., Nicol, A., Schöpfer, M.P.J. (2009) A geometric model of fault zone and fault rock thickness variations. Jour. Struc. Geol., v.31(2), pp.117–127.CrossRefGoogle Scholar
  13. Cundall, P.A. (1990) Numerical modelling of jointed and faulted rock. Mechanics of Jointed and faulted rock, v.12(3), pp.11–18.Google Scholar
  14. Das, A.J., Mandal, P.K., Bhattacharjee, R., Tewari, S., Kushwaha, A. (2017a) Effect of fault on the stability of workings during underground extraction of coal. In Proc. int. conf. NexGen Technologies for Mining and Fuel Industries, February 15–17, New Delhi, vol. I, pp.155–166.Google Scholar
  15. Das, A.J., Mandal, P.K., Bhattacharjee, R., Tiwari, S., Kushwaha, A. and Roy, L.B. (2017) Evaluation of stability of underground workings for exploitation of an inclined coal seam by the ubiquitous joint model. Internat. Jour. Rock Mech. Min. Sci., v.93, pp.101–114.CrossRefGoogle Scholar
  16. Day, R.A. and Potts, D.M. (1994) Zero thickness interface elements-Numerical stability and application. Internat.l Jour. Numerical and Analytical Methods in Geomechanics, v.18(10), pp.689–708.CrossRefGoogle Scholar
  17. Deb, D. (2006) Finite element method: concepts and applications in geomechanics. Prentice-Hall of India, 269p.Google Scholar
  18. Desai, C.S., Zaman, M.M., Lightner, J.G. and Siriwardane, H.J. (1984) Thin layer element for interfaces and joints. Internat. Jour. Numerical and Analytical Methods in Geomechanics, v.8(1), pp.19–43.CrossRefGoogle Scholar
  19. Dieterich, J. and Linker, M.F. (1992) Fault stability under conditions of variable normal stress. Geophys. Res. Lett., v.19(16), pp.1691–1694.CrossRefGoogle Scholar
  20. Ghazvinian, E., Diederichs, M.S. and Quey, R. (2014) 3D random Voronoi grain-based models for simulation of brittle rock damage and fabric-guided micro-fracturing. Jour. Rock Mech. Geotech. Engg., v.6(6), pp.506–521.CrossRefGoogle Scholar
  21. Goodman, R.E., Taylor, R.L. and Brekke, T.L. (1968) A model for the mechanics of jointed rocks. Jour. Soil Mech. Found. Div., pp.637–695.Google Scholar
  22. Hao, Y.H. (2003) Numerical modeling of the effect of faults on large-scale underground cavern. Division of Engineering Geology and Hydrogeology, RWTH, Aachen.Google Scholar
  23. Hao, Y.H. and Azzam, R. (2005) The plastic zones and displacements around underground openings in rock masses containing a fault. Tunnelling and Underground Space Technology, v.20(1), pp. 49–61.CrossRefGoogle Scholar
  24. Hazzard, J.F., Collins, D.S., Pettitt, W.S. andYoung, R.P. (2002) Simulation of unstable fault slip in granite using a bond-particle model, Pure Appld. Geophys., v.159, pp.221–245.Google Scholar
  25. Hoek, E. (1990) Estimating Mohr-Coulomb friction and cohesion values from the Hoek-Brown failure criterion. International Jour. Rock Mech. Min. Sci. Geomech. Abs., v.27(3), pp.227–229.CrossRefGoogle Scholar
  26. Hoek, E. (1999) Support for very weak rock associated with faults and shear zones. In: Proc. Rock Support & Reinforcement Practice in Mining, Villaescusa, pp.19–32.Google Scholar
  27. Hubbert, M.K. and Rubey, W.W. (1959) Role of fluid pressure in mechanics of overthrust faulting, Bull. Geol. Soc. Amer, v.70, pp.111–205.CrossRefGoogle Scholar
  28. Itasca (2016) 3 Dimensional Distinct Element Code (3DEC), version 5.0 User manual.Google Scholar
  29. Jaeger, J.C., Cook, N.G. and Zimmerman, R. (1979) Fundamentals of rock mechanics. John Wiley & Sons; 2009 Mar 12.Google Scholar
  30. Jeon, S., Kim, J., Seo, Y. and Hong, C. (2004) Effect of a fault and weak plane on the stability of a tunnel in rock-a scaled model test and numerical analysis. Internat. Jour. Rock Mech. Min. Sc., v.41, pp.658–663.CrossRefGoogle Scholar
  31. Jing, L. (1998) Formulation of discontinuous deformation analysis (DDA)-an implicit discrete element model for block systems. Engg. Geol., v.49(3), pp.371–381.CrossRefGoogle Scholar
  32. Kazerani, T. (2013) A discontinuum-based model to simulate compressive and tensile failure in sedimentary rock. Jour. Rock Mech. Geotech. Engg., v.5(5), pp.378–388.CrossRefGoogle Scholar
  33. Kazerani, T. and Zhao, J. (2010) Micromechanical parameters in bonded particle method for modelling of brittle material failure. Internat. Jour. Numerical and Analytical Methods in Geomechanics, v.34(18), pp.1877–1895.CrossRefGoogle Scholar
  34. Kumar, P. (1997) Slip zones around circular openings in a jointed Hoek-Brown medium. Internat. Jour. Rock Mech. Min. Sci., v.34(6), pp.875–883.CrossRefGoogle Scholar
  35. Kushwaha, A., Bhattacharjee, R., Tewari, S. and Mandal, P.K. (2016) Role of geological discontinuities during application of continuous miner technology in underground coal mines. Jour. Mines, Metals & Fuels, v.64(9), pp.395–405.Google Scholar
  36. Mandal, P.K., Singh, R., Maiti, J., Singh, A.K., Kumar, R., Sinha, A. (2008) Underpinning-based simultaneous extraction of contiguous sections of a thick coal seam under weak and laminated parting. Internat. Jour.f Rock Mech. Min. Sci., v.45(1), pp.11–28.CrossRefGoogle Scholar
  37. Mohan, G.M., Sheorey, P.R. and Kushwaha, A. (2001) Numerical estimation of pillar strength in coal mines. Internat. Jour. Rock Mech. Min. Sci., v.38, pp.1185–1192.CrossRefGoogle Scholar
  38. Nagelhout, A.C.G. and Roest, J.P.A. (1997) Investigating fault slip in a model of an underground gas storage facility. Internat. Jour. Rock Mech. Min. Sci., v.34(3), pp.97–115.Google Scholar
  39. Nguyen, T.K., Pouya, A. and Rohmer, J. (2015) Integrating damage zone heterogeneities based on stochastic realizations of fracture networks for fault stability analysis. Internat. Jour. Rock Mech. Min. Sci., v.80, pp.325–336.CrossRefGoogle Scholar
  40. Ortlepp, W.D. (2000) Observation of mining-induced faults in an intact rock mass at depth. Internat. Jour. Rock Mech. Min. Sci., v.37(1), pp.423–436.CrossRefGoogle Scholar
  41. Sainoki, A. and Mitri, H.S. (2015) Effect of slip-weakening distance on selected seismic source parameters of mining-induced fault-slip. Internat. Jour. Rock Mech. Min. Sci., v.73, pp.115–122.CrossRefGoogle Scholar
  42. Schubert, W. and Riedmüller, G. (1997) Influence of faults on tunnelling. Felsbau, v.15(6), pp.483–488.Google Scholar
  43. Sheorey, P.R. (1994) A theory for in situ stresses in isotropic and transverseley isotropic rock. Internat. Jour. Rock Mech. Min. Sci. Geomech. Abs., v.31(1), pp.23–34.CrossRefGoogle Scholar
  44. Sheorey, P.R. (1994) A theory for in situ stresses in isotropic and transversely isotropic rock. Jour. Rock Mech. Min. Sci. Geomech. Abs., v.31, pp.23–34.CrossRefGoogle Scholar
  45. Sheorey, P.R. (1997) Empirical rock failure criteria. A. A. Balkema, Rotterdam, 176p.Google Scholar
  46. Sheorey, P.R., Das, M.N., Barat, D., Prasad, R.K. and Singh, B. (1987) Coal pillar strength estimation from failed and stable cases. Jour. Rock Mech. Min. Sci. Geomech. Abs., v.24(6), pp. 347–355.CrossRefGoogle Scholar
  47. Suorineni, F.T., Tannant, D.D., Kaiser, P.K. (1999) Determination of faultrelated sloughage in open stopes. Jour. Rock Mech. Min. Sci. Geomech. Abs., v.36(7), pp.891–906.CrossRefGoogle Scholar
  48. Ucar R. (1986) Determination of shear failure envelope in rock masses. Jour. Geotech. Engg., v.112(3), pp.303–315.CrossRefGoogle Scholar
  49. Xiao, L.C. and Quan, J.J. (2002) Numerical simulation of slope stability, with 3DEC, and verification in field, by the GPR. In: Proc. ISRM International Symposium-EUROCK 2002. International Society for Rock Mechanics.Google Scholar
  50. Xu, S., Nieto-Samaniego, A.F., Alaniz-Álvarez, S.A. (2009) Quantification of true displacement using apparent displacement along an arbitrary line on a fault plane. Tectonophys., v.467, pp.107–118.CrossRefGoogle Scholar
  51. Xu, S.S., Velasquillo-Martinez, L.G., Grajales-Nishimura, J.M., Murillo-Muñetón, G. and Nieto-Samaniego, A.F. (2007) Methods for quantitatively determining fault slip using fault separation. Jour. Struc. Geol., v.29, pp.1709–1720.CrossRefGoogle Scholar
  52. Zhang, Z., Chen, F., Li, N., Swoboda, G. and Liu, N. (2017) Influence of fault on the surrounding rock stability of a tunnel: Location and thickness. Tunnelling and Underground Space Technology, v.61, pp.1–11.CrossRefGoogle Scholar

Copyright information

© Geological Society of India 2018

Authors and Affiliations

  • Arka Jyoti Das
    • 1
  • Prabhat Kumar Mandal
    • 1
    Email author
  • Satya Prakash Sahu
    • 2
  • Angad Kushwaha
    • 1
  • Rana Bhattacharjee
    • 1
  • Subhashish Tewari
    • 1
  1. 1.CSIR-Central Institute of Mining and Fuel ResearchDhanbadIndia
  2. 2.Indian Institute of Technology (IIT), KharagpurKharagpurIndia

Personalised recommendations