Advertisement

In Vitro Study for Use of Cactus Gel in Enhancing the Mechanical Strengths of Vegetable Tanned Leathers Under Accelerated Aging

  • Rushdya Rabee Ali HassanEmail author
Regular Paper
  • 49 Downloads

Abstract

The present experimental study investigate the use of aloe vera gel as an innovative material to reinforce the degraded leather. The effectiveness of the proposed material was assessed by measuring the mechanical properties, color change, infrared spectroscopy, pH measurement, and microscopic examination. The results showed the effectiveness of the gel material in improving the tensile strength, elongation, and reducing the color change during the aging process without affecting the degree of pH as well as its ability to penetrate the fiber cells, which contributed to increase the size of fibers, fiber bundles, and the cohesion of internal structure of the leather as explained the results of SEM. Although gel has no effect in inhibiting the growth of fungi, it has helped reduce growth slightly.

Keywords

Cactaceae β sheet Corium Pyranoside Thermogravimetric 

Notes

References

  1. 1.
    Syomiti, M. E., Maranga, E., Obwoyere, O. G., & Tegegn, G. G. (2014). Chemical composition of cactus (Opuntia ficus indica and Prosopis Species (Prosopis juliflora as drought resilient feed resources in Kenya. Journal of Environment Natural Resources Management and Society,2, 41–47.Google Scholar
  2. 2.
    Ennouri, M., Ammar, L., Khemakhem, B., & Attia, H. (2014). Chemical composition and antibacterial activity of Opuntia ficus-indica f. inermis (cactus pear) flowers. Journal of Medical Food,17(8), 908–914.Google Scholar
  3. 3.
    Chandra, S., Eklund, L., & Villarreal, R. (1998). Use of cactus in mortars and concrete. Cement and Concrete Research,28, 41–51.Google Scholar
  4. 4.
    Ventolà, L., Vendrell, M., Giraldez, P., & Merino, L. (2011). Traditional organic additives improve lime mortars: New old materials for restoration and building natural stone fabrics. Construction and Building Materials,25, 3313–3318.Google Scholar
  5. 5.
    Leon-Martinez, F. M., Cano-Barrita, P. F., Lagunez-Rivera, L., & Medina-Torres, L. (2014). Study of nopal mucilage and marine brown algae extract as viscosity-enhancing admixtures for cement based materials. Construction and Building Materials,53, 190–202.Google Scholar
  6. 6.
    El-Mostafa, K., El Kharrassi, Y., Badreddine, A., Andreoletti, P., & Vamecq, J. (2014). Nopal Cactus (Opuntia ficus-indica) as a source of bioactive compounds for nutrition.Health and Disease, Molecules,19, 14879–14901.Google Scholar
  7. 7.
    Martínez, U., Esparza, J., & Rodríguez-Fragoso, L. (2014). Cactus (Opuntia ficus-indica): A review on its antioxidants properties and potential pharmacological use in chronic diseases. Natural Products Chemistry and Research,2, 153–160.Google Scholar
  8. 8.
    Nayndamma, Y. (1958). Shrinkage Phenomena. In F. O’Flaherty, et al. (Eds.), The chemistry and technology of leather (pp. 28–65). New York: Reinhold.Google Scholar
  9. 9.
    Wouters, J., & Claeys, J. (1996). Analysis of tannins, sulphate, fat, moisture and ash: Evolution and significance of parameters to be followed for measuring the degradation of vegetable tanned leather. In R. Larsen (Ed.), Environment Leather Project (pp. 87–94). Copenhagen: Royal Danish Academy of Fine Arts.Google Scholar
  10. 10.
    Fathima, N., Dhathathreyan, A., & Ramasami, A Th. (2001). A new insight into the shrinkage phenomenon of hides and skins. Journal of the American Leather Chemists Association,96, 417–425.Google Scholar
  11. 11.
    Tuck, D. H. (1983). Oils and lubricants used on leather. Northampton: The leather Conservation Center.Google Scholar
  12. 12.
    Ayoub, S. M. (1982). A new molluscicide and al gicide from the fruit of acacia nilotica. Journal of Chemical Technology and Biotechnology,32, 728–734.Google Scholar
  13. 13.
    Faxing, L., Yang, L., & Youjie, H. (2005). Preparation and the properties of vegetable extract used in low temperature tanning. Leather Science and Engineering,15(1), 22–25.Google Scholar
  14. 14.
    Zaruwa, M. Z., & Kwaghe, Z. E. (2014). Traditional tannery and dyeing(Yirie) methods in Northeastern Nigeria. African Update Newsletter,15(1), 29–33.Google Scholar
  15. 15.
    Chae, Y., Chae, G., Youn, Y., Woo, S., Shin, S., & Lee, J. (2018). Optimal design of thickness and Young’s Modulus of multi-layered foldable structure considering bending stress, neutral plane and delamination under 2.5 mm radius of curvature. International Journal of Precision Engineering and Manufacturing,19(8), 1143–1154.Google Scholar
  16. 16.
    Kite, M., Thompson, R., & Angus, A. (2006). Materials and techniques: Past and present. In M. Kite & R. Thompson (Eds.), Conservation of leather and related materials (pp. 120–124). Oxford: Butterworth-Heinemann.Google Scholar
  17. 17.
    Sönmez, F., Başak, H., Güral, A., & Baday, S. (2018). Investigating the efficiency of secondary aging and burnishing process in friction stir welded Al-7075-T6 material. International Journal of Precision Engineering and Manufacturing,19(10), 1515–1520.Google Scholar
  18. 18.
    Larsen, R., Vest, M., & Nielsen, K. (1993). Determination of hydrothermal stability (shrinkage temperature) of historical leathers by Micro Hot Table technique. The Society of Leather Technologists and Chemists,77, 151–156.Google Scholar
  19. 19.
    Organisation in Internationale de Me´trologie Le´gale (1996). OIML, The scale of relative humidity of air certified against saturated salt solutions, OIML R.121,.P.7.Google Scholar
  20. 20.
    ISO 3376.(2011). Leather: Physical and mechanical tests—Determination of tensile strength and percentage extension.Google Scholar
  21. 21.
    Hassan, R. R., & Mohamed, W. S. (2017). Effect of methyl methacrylate/hydroxyethyl methacrylate copolymer on mechanical properties, optical and long-term durability of paper under accelerated ageing. International Journal of Conservation Science,8, 237–250.Google Scholar
  22. 22.
    Lucretia, M., Bogdan, L., Mihalis, B., Elena, C., & Ioana, S. (2016). Preliminary characterisation of vegetable leather used in heritage bindery. International Conference on Advanced Materials and Systems,5, 557–562.Google Scholar
  23. 23.
    Hassan, R. R., & Mohamed, W. S. (2018). The impact of methyl methacrylate hydroxyethyl methacrylate loaded with silver nanoparticles on mechanical properties of paper. Applied Physics A,124(8), 551.Google Scholar
  24. 24.
    Bauer, A. W., Kirby, W. M., Sherris, C., & Turck, M. (1966). Antibiotic susceptibility testing by a standardized single disk method.American Journal of Clinical Pathology,45, 493–496.Google Scholar
  25. 25.
    ASTM D2810-13, Standard Test Method for pH of Leather, ASTM International, West Conshohocken, PA, 2013, www.astm.org.
  26. 26.
    Koochakzaei, A., Ahmadi, H., & Achachluei, M. M. (2016). An experimental comparative study on silicone oil and polyethylene glycol as dry leather treatments. Journal-American Leather Chemists Association,111, 377–383.Google Scholar
  27. 27.
    Sizeland, K. H., Wells, H. C., Kelly, S. J. R., Edmonds, R. L., & Kirby, N. M. (2017). The influence of water, lanolin, urea, proline, paraffin and fat-liquor on collagen D-spacing in leather. RSC Advances,7, 40658–40663.Google Scholar
  28. 28.
    Sajjad, A., & Sajjad, S. S. (2014). Aloe vera: An ancient herb for modern dentistry—A literature review. Journal of Dental Surgery.  https://doi.org/10.1155/2014/210463.CrossRefGoogle Scholar
  29. 29.
    Beier, G., Niehoff, S., Ziems, T., & Xue, B. (2017). Sustainability aspects of a digitalized industry—A comparative study from China and Germany. International Journal of Precision Engineering and Manufacturing-Green Technology,4(2), 227–234.Google Scholar
  30. 30.
    Kang, H. S., Lee, J. Y., Choi, S., Kim, H., & Park, J. H. (2016). Smart manufacturing: Past research, present findings, and future directions. Journal of Precision Engineering and Manufacturing-Green Technology,3(1), 111–128.Google Scholar
  31. 31.
    Florian, M. L. E. (2006). The mechanisms of deterioration of leather. In M. Kite & R. Thompson (Eds.), Conservation of leather and related materials (pp. 36–54). Oxford: Butterworth-Heinemann.Google Scholar
  32. 32.
    Hassan, R. R. (2016). Preliminary study on using line seed oil emulsion in dressing archaeological leather. Journal of Cultural Heritage,21, 786–795.Google Scholar
  33. 33.
    Cantero, R., Riba, J. R., Canals, T., & Izquierdo, L. L. (2009). Characterisation of leather finishing by IR spectroscopy and canonical variate analysis. Journal of the Society of Leather Technologists and Chemists,93(1), 12.Google Scholar
  34. 34.
    Puică, N. M., & Florescu, A. M. (2006). FTIR Spectroscopy for the analysis of vegetable tanned ancient leather. European Journal of Science and Theology,2(4), 49–53.Google Scholar
  35. 35.
    Samadi, P. Y. (2011). Moist heating-induced changes in protein molecular structure, protein sub fraction, and nutrient profiles in soybeans.Journal of Dairy Science,94(12), 6092–60102.MathSciNetGoogle Scholar
  36. 36.
    Malea, E. S., Boyatzis, C., & Kehagia, M.(2010). Cleaning of tanned leather: Testing with infra red spectroscopy and SEM-EDAX, joint interim meeting of five ICOM-CC working groups. Leather and Related materials. Rome (pp. 1–12).Google Scholar
  37. 37.
    Hassan, R. R. (2015). Tafsir Al khazen” manuscript (17 th century AD. A technical study International Journal of Conservation Science,6(3), 369–382.MathSciNetGoogle Scholar
  38. 38.
    Tite, T., Miu, L., Giurginca, M., & Meghea, A. (2006). Evaluation of degradation of parchment and leather by FT-IR and UV-VIS-NIR spectroscopy. Revista de Chimie-Bucharest-Original Edition,57(5), 466–471.Google Scholar
  39. 39.
    Mansour, M., Hassan, R. R., & Salem, M. (2017). Characterization of historical bookbinding leather by FTIR, SEM and EDX, and investigation of fungal species isolated from the leather. Egyptian Journal of Archaeological and Restoration Studies,7(1), 1–10.Google Scholar
  40. 40.
    Vetter, W., Petroviciu, I., Ciprian,C., Miu, L., & Schreiner M. (2010). Characterization of leather by UV-VIS spectroscopy and MHT method. InProceedings of the 3rd international conference on advanced materials and systems, ICAMS (pp. 463–468).Google Scholar
  41. 41.
    Yagi, A., Egusa, T., Arase, M., Tanabe, M., & Tsuji, H. (1997). Isolation and characterization of the glycoprotein fraction with a proliferation-promoting activity on human and hamster cells in vitro from aloe vera gel. Planta Medica,63(1), 18–21.Google Scholar
  42. 42.
    Sham, A. S., Chu, F. C., Chai, J. J., & Chow, T. W. (2004). Color stability of provisional prosthodontic materials. Journal of Prosthetic Dentistry,9, 1447–1452.Google Scholar
  43. 43.
    Choi, S., Lee, P., & Jhang, K. (2019). A pulse inversion-based nonlinear ultrasonic technique using a single-cycle longitudinal wave for evaluating localized material degradation in plates. International Journal of Precision Engineering and Manufacturing,20, 549–558.Google Scholar
  44. 44.
    Ahmed, H. E., Zidan, Y., & El-Nagar, K. (2005). Studies on dyeing with cochineal and ageing of silk dyed fabric. In R. Janaway & P. Wyeth (Eds.), Scientific analysis of ancient and historic textiles (pp. 246–250). London: Archetype Publications.Google Scholar
  45. 45.
    Fani, M., & Kohanteb, J. (2012). Inhibitory activity of aloe vera gel on some clinically isolated cariogenic and periodontopathic bacteria.Journal of Oral Science,54(1), 15–21.Google Scholar
  46. 46.
    Athiban, P. P., Borthakur, B. J., Ganesan, S., & Swathika, B. (2012). Evaluation of antimicrobial efficacy of aloe vera and its effectiveness in decontaminating gutta percha cones. Journal of Conservative Dentistry,15(3), 246–248.Google Scholar
  47. 47.
    Barandozi, F. N. (2013). Antibacterial activities and antioxidant capacity of Aloe vera. Organic and Medical Chemistry Letters,193(1), 5–10.Google Scholar

Copyright information

© Korean Society for Precision Engineering 2019

Authors and Affiliations

  1. 1.Restoration and Conservation Department, Faculty of ArchaeologyCairo UniversityGizaEgypt

Personalised recommendations