Advertisement

Trends in 3D Printing Technology for Construction Automation Using Text Mining

  • Dongyoun Lee
  • Hakmin Kim
  • Joonhyeok Sim
  • Dongmin Lee
  • Hunhee Cho
  • Daehie HongEmail author
Review Paper
  • 78 Downloads

Abstract

3D printing technology, which enables mass production and customized small-volume production, has attracted widespread interest throughout many industries. Applying 3D printing within the construction industry has now been well researched. There are also studies that show research trends related to 3D printing in the construction industry. These studies have mainly referred to equipment, materials, and related software. However, they have discussed only specific fragmentary aspects such as the number of articles published per year or research trends by country. Therefore, this study aims to broaden the discussion by extracting keywords from papers published during the last 20 years that point to research trends in 3D printing, using text-mining-based relationship analysis. These results enable us to identify the necessary research fields for 3D printing in the construction industry of the future.

Keywords

3D printing Construction Text mining Trend research 

Notes

Acknowledgements

This research was supported by a grant (18AUDP-B121595-03) from Architecture & Urban Development Research Program funded by the Ministry of Land, Infrastructure and Transport of the Korean Government. and was supported by the National Research Foundation of Korea grant funded by the Korea Government (2016R1A2B3015348).

References

  1. 1.
    Gibson, I., Rosen, D. W., & Brent, S. (2010). Additive manufacturing technologies. Berlin: Springer.CrossRefGoogle Scholar
  2. 2.
    Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013). Additive manufacturing and its societal impact: A literature review. The International Journal of Advanced Manufacturing Technology, 67(5–8), 1191–1203.CrossRefGoogle Scholar
  3. 3.
    Vaezi, M., Seitz, H., & Yang, S. (2013). A review on 3D micro-additive manufacturing technologies. The International Journal of Advanced Manufacturing Technology, 67(5), 1721–1754.CrossRefGoogle Scholar
  4. 4.
    Chua, C. K., & Leong, K. F. (2014). 3D printing and additive manufacturing: Principles and applications (4th ed.). Singapore: World Scientific.CrossRefGoogle Scholar
  5. 5.
    Conner, B. P., Manogharan, G. P., Martof, A. N., Rodomsky, L. M., Rodomsky, C. M., et al. (2014). Making sense of 3-D printing: Creating a map of additive manufacturing products and services. Additive Manufacturing, 1–4, 64–76.CrossRefGoogle Scholar
  6. 6.
    Thomas, D. S., & Gilbert, S. W. (2014). Costs and cost effectiveness of additive manufacturing. NIST Special Publication, 1176, 12.Google Scholar
  7. 7.
    Wu, P., Wang, J., & Wang, X. (2016). A critical review of the use of 3-D printing in the construction industry. Automation in Construction, 60, 21–31.CrossRefGoogle Scholar
  8. 8.
    Tay, Y. W. D., Panda, B., Paul, S. C., Noor Mohamed, N. A., Tan, M. J., et al. (2017). 3D printing trends in building and construction industry: A review. Journal of Virtual and Physical Prototyping, 12(3), 261–276.CrossRefGoogle Scholar
  9. 9.
    Gupta, V., & Lehal, G. S. (2009). A survey of text mining techniques and applications. Journal of Emerging Technologies in Web Intelligence, 1(1), 60–76.CrossRefGoogle Scholar
  10. 10.
    Cho, S. G., & Kim, S. B. (2012). Finding meaningful pattern of key words in IIE transactions using text mining. Journal of the Korean Institute of Industrial Engineers, 38(1), 67–73.CrossRefGoogle Scholar
  11. 11.
    Zareiyan, B., & Khoshnevis, B. (2017). Effects of interlocking on interlayer adhesion and strength of structures in 3D printing of concrete. Automaton in Construction, 83, 212–221.CrossRefGoogle Scholar
  12. 12.
    Khoshnevis, B., Bodiford, M., Burks, K., Ethridge, E., Tucker, D., et al. (2008) Lunar contour crafting—A Novel technique for ISRU-based habitat development. In 43rd AIAA aerospace sciences meeting and exhibit, meeting papers (p. 538).Google Scholar
  13. 13.
    Zareiyan, B., & Khoshnevis, B. (2017). Interlayer adhesion and strength of structures in contour crafting—Effects of aggregate size, extrusion rate, and layer thickness. Automation in Construction, 81, 112–121.CrossRefGoogle Scholar
  14. 14.
    Mueller, R. P., Howe, S., Kochmann, D., Ali, H., Andersen, C., et al. (2016) Automated additive construction (AAC) for earth and space using in-situ resources. In Proceedings of the fifteenth biennial ASCE aerospace division international conference on engineering, science, construction, and operations in challenging environments (earth & space 2016), American Society of Civil Engineers.Google Scholar
  15. 15.
    Dadi, G. B., Taylor, T. R., Goodrum, P. M., & Maloney, W. F. (2014). Performance of 3D computers and 3D printed models as a fundamental means for spatial engineering information visualization. Canadian Journal of Civil Engineering, 41(10), 869–877.CrossRefGoogle Scholar
  16. 16.
    Lim, S. Y., Lim, Y. M., & Lee, J. Y. (2014). Study on the trends of u-city and smart city researches using text mining technology. Journal of the Korean Society for Geo-Spatial Information System, 22(3), 87–97.CrossRefGoogle Scholar
  17. 17.
    Wohlers, T. (2012). Additive manufacturing and 3D printing state of the industry. In Annual worldwide progress report, Wohlers Association.Google Scholar
  18. 18.
    Mireles, J., Espalin, D., Roberson, D., Zinniel, B., Medina, F., & Wicker, R. (2012). Fused deposition modelling of metals. Proceedings of Solid Freeform Fabrication Symposium, 2012, 836–845.Google Scholar
  19. 19.
    Khoshnevis, B. (2004). Automated construction by contour crafting related robotics and information technologies. Automation in Construction, 13(1), 5–19.CrossRefGoogle Scholar
  20. 20.
    Lim, S., Buswell, R. A., Le, T. T., Austin, S. A., Gibb, A. G., et al. (2012). Developments in construction-scale additive manufacturing processes. Automation in Construction, 21(1), 262–268.CrossRefGoogle Scholar
  21. 21.
    Izabela, H., Anna, G., & Roman, P. (2016). 3D printing of buildings and building components as the future of sustainable construction? Procedia Engineering, 151, 292–299.CrossRefGoogle Scholar
  22. 22.
    Kruth, J. P., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005). Binding mechanisms in selective laser sintering and selective laser melting. Rapid Prototyping Journal, 11(1), 26–36.CrossRefGoogle Scholar
  23. 23.
    Kruth, J. P., Froyen, L., Van Vaerenbergh, J., Mercelis, P., Rombouts, M., et al. (2004). Selective laser melting of iron-based powder. Journal of Materials Processing Technology, 149(1–3), 616–622.CrossRefGoogle Scholar
  24. 24.
    Kamrani, A. K., & Nasr, E. A. (2010). Engineering design and rapid prototyping. Berlin: Springer.CrossRefGoogle Scholar
  25. 25.
    Nesma, T. A., Nicola, M. E., Ian, A., & Chris, T. (2014). Reducing porosity in AlSi10 Mg parts processed by selective laser melting. Additive Manufacturing, 1–4, 77–86.Google Scholar
  26. 26.
    Monolite. (2015). D-shape.Google Scholar
  27. 27.
    Kreiger, M. A., Macallister, B. A., Wilhoit, J. M., & Case, M. P. (2015) The current state of 3D printing for use in construction. In The proceedings of the 2015 conference on autonomous and robotic construction of infrastructure. Ames, IA (pp. 149–158).Google Scholar
  28. 28.
    Molitch-Hou, M. (2015). Branch technology is 3d printing the future of construction one wall at a time. http://3dprintingindustry.com/2015/07/28/branch-technology-is-3dprinting-the-future-of-construction-one-wall-at-a-time/2015
  29. 29.
    Khoshnevis, B., Russell, R., Kwon, H., & Bukkapatnam, S. (2001). Contour crafting—A layered fabrication technology. Special Issue IEEE Robotics and Automation Magazine, 8(3), 33–42.CrossRefGoogle Scholar
  30. 30.
    Khoshnevis, S., Bukkapatnam, S., Kown, H., & Saito, J. (2001). Experimental investigation of contour crafting using ceramics materials. Rapid Prototyping Journal, 7(1), 32–41.CrossRefGoogle Scholar
  31. 31.
    Bak, D. (2003). Rapid prototyping or rapid production? 3D printing processes move industry towards the latter. Assembly Automation, 23(4), 340–345.CrossRefGoogle Scholar
  32. 32.
    Buswell, R. A., Soar, R. C., Gibb, A. G., & Thorpe, A. (2006). Freeform construction: Mega-scale rapid manufacturing for construction. Automation in Construction, 16(2), 224–231.CrossRefGoogle Scholar
  33. 33.
    Lim, S., Buswell, R., Le, T., Wackrow, R., Austin, S. A., et al. (2011). Development of a viable concrete printing process. In Proceeding for 28th international symposium on automation and robotics in construction (ISARC2011), Seoul (pp. 665–670).Google Scholar
  34. 34.
    Kang, J. Y., Park, J. S., Jung, W. T., & Keum, M. S. (2015). Connection between concrete layers with different strengths. Engineering, 7(7), 365–372.CrossRefGoogle Scholar
  35. 35.
    Zegard, T., & Paulino, G. H. (2016). Bridging topology optimization and additive manufacturing. Structural and Multidisciplinary Optimization, 53(1), 175–192.CrossRefGoogle Scholar
  36. 36.
    Brackett, D., Ashcroft, I., & Hague, R. (2011). Topology optimization for additive manufacturing (pp. 348–362). Austin, TX: Proceedings of the Solid Freeform Fabrication Symposium.Google Scholar
  37. 37.
    Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Gibb, A. G., et al. (2012). Mix design and fresh properties for high-performance printing concrete. Materials and Structures, 45(8), 1221–1232.CrossRefGoogle Scholar
  38. 38.
    Nerella, V. N., Krause, M., Näther, M., & Mechtcherine, V. (2016). Studying printability of fresh concrete for formwork free concrete on-site 3D printing technology (CONPrint3D). In Proceedings for the 25th conference on rheology of building materials, Regensburg Google Scholar
  39. 39.
    Van Zijl, G., Paul, S. C., & Tan, M. J. (2016). Properties of 3D printable concrete. In Proceedings for 2nd international conference on progress in additive manufacturing (Pro-AM), Singapore, pp. 421–426.Google Scholar
  40. 40.
    Mahamood, R. M., Akinlabi, E. T., Shukla, M., & Pityana, S. (2012). Functionally graded material: An overview. World Congress on Engineering, III, 2–6.Google Scholar
  41. 41.
    Bekas, D. G., Tsirka, K., Baltzis, D., & Paipetis, A. S. (2016). Self-healing materials: A review of advances in materials, evaluation, characterization and monitoring techniques. Composites Part B Engineering, 87, 92–119.CrossRefGoogle Scholar
  42. 42.
    Nour, M. (2007). Manipulating ifc sub-models in collaborative teamwork environments. In Proceedings of the 24th CIB W-78 conference on information technology in construction.Google Scholar
  43. 43.
    Arayici, Y., & Aouad, G. (2010). Building information modelling (BIM) for construction lifecycle management. In: Construction and building: design, materials, and techniques (pp. 99–118). Nova Science Publishers.Google Scholar
  44. 44.
    Eastman, C., Teicholz, P., Sacks, R., & Liston, K. (2011). BIM handbook: A guide to building information modeling for owners, managers, designers, engineers and contractors. Hoboken: Wiley.Google Scholar
  45. 45.
    Shou, W., Wang, J., Wang, X., & Chong, H. Y. (2014). A comparative review of building information modelling implementation in building and infrastructure industries. Archives of Computational Methods in Engineering, 22(2), 291–308.CrossRefGoogle Scholar
  46. 46.
    Wang, J., Sun, W., Shou, W., Wang, X., Wu, C., et al. (2014). Integrating BIM and lidar for real-time construction quality control. Journal of Intelligent and Robotic Systems, 79(3–4), 417–432.Google Scholar
  47. 47.
    Bogue, R. (2013). 3D printing: The dawn of a new era in manufacturing. Assembly Automation, 33(4), 307–311.CrossRefGoogle Scholar
  48. 48.
    Chen, W., & Qin, W. (2012). On rapid prototyping instrument applied in BIM Technology. China Municipal Engineering, 6, 026.Google Scholar
  49. 49.
    Clevenger, C. M., & Khan, R. (2013). Impact of BIM-enabled design-to-fabrication on building delivery. Practice Periodical on Structural Design and Construction, 19(1), 122–128.CrossRefGoogle Scholar
  50. 50.
    Lu, N., & Korman, T. (2010). Implementation of building information modeling (BIM) in modular construction: Benefits and challenges. In Proceedings of the construction research congress.Google Scholar
  51. 51.
    Elmualim, A., & Gilder, J. (2013). BIM: Innovation in design management, influence and challenges of implementation. Architectural Engineering and Design Management, 10(3–4), 183–199.Google Scholar
  52. 52.
    Sass, L., & Oxman, R. (2006). Materializing design: The implications of rapid prototyping in digital design. Design Studies, 27(3), 325–355.CrossRefGoogle Scholar
  53. 53.
    Zhang, J., & Hu, Z. (2011). BIM- and 4D-based integrated solution of analysis and management for conflicts and structural safety problems during construction: 1. Principles and methodologies. Automation in Construction, 20(2), 155–166.CrossRefGoogle Scholar
  54. 54.
    Liang, F., & Liang, Y. (2014) Study on the status quo and problems of 3D printed buildings in china. Global Journal of Human-Socal Science, 14, 7–10.Google Scholar
  55. 55.
    Agustí-Juan, I., & Habert, G. (206) An environmental perspective on digital fabrication in architectural and construction. In: Proceedings of the 21st international conference on computer-aided architectural design research in Asia (CAADRIA) (pp. 797–806).Google Scholar

Copyright information

© Korean Society for Precision Engineering 2019

Authors and Affiliations

  1. 1.School of Civil, Environmental and Architectural EngineeringKorea UniversitySeoulSouth Korea
  2. 2.Department of Mechanical EngineeringKorea UniversitySeoulSouth Korea

Personalised recommendations