Advertisement

Stress analysis of ore particle flow behaviour under the influence of a flexible barrier

  • Qingfa ChenEmail author
  • Shikang Qin
  • Qinglin Chen
Original Paper
  • 31 Downloads

Abstract

Additional stresses caused by a flexible barrier, drawpoints and the self-weight of ore particles were investigated based on a physical experiment of the shrinkage stoping method of synchronous filling, and the flow behaviour of ore particles is described by the component forces. This study shows that when ore particles are drawn from multiple drawpoints under the influence of a flexible barrier, the stress distribution of the ore particles is sinusoidal, with an amplitude that gradually decreases with increasing height. The values of σx and σy gradually decrease with increasing height; the maximum σy values occur at x = 0, the maximum σx values occur at x = ± 10 and the maximum shear stresses occur near the lateral walls. The shape of the draw column is determined by the additional vertical stress, and its contour determines the essential morphology of the drawbody. The surface of the ore particles is smoothed by the additional stress caused by the barrier, and the self-weight of the ore particles is the inherent cause of the additional stress.

Keywords

Flexible barrier Draw theory Ore particle Stress analysis Flow behaviour 

Notes

Funding information

This work was financially supported by the National Natural Science Foundation of China (grant no. 51464005).

References

  1. Bian ZF, Yang HI, Daniels JL, Frank O, Sue S (2010) Environmental issues from coal mining and their solutions. Int J Min Sci Technol 20:215–223Google Scholar
  2. Bloom JA, Gallant L (1994) Modelling dispatch constraints in production cost simulations based on the equivalent load method. IEEE Trans Power Syst 9:598–611CrossRefGoogle Scholar
  3. Chen QF, Chen QL (2015) Synchronous filling mining technology idea and a kind of representative mining method. China Min Mag 24:86–88Google Scholar
  4. Chen QF, Wu ZX (2010) A large number of ore drawing synchronous filling no-top-pillar shrinkage stopping method. CNGoogle Scholar
  5. Chen QF, Chen QL, Zhong JY (2016) Flow pattern of granular ore rock in a single funnel under a flexible barrier. Chin J Eng 38:893–898Google Scholar
  6. Chen QF, Zhao FY, Chen QL, Wang YD, Zhong Y, Niu WJ (2017) Orthogonal simulation experiment for flow characteristics of ore in ore drawing and influencing factors in a single funnel under a flexible isolation layer. JOM 69:2485–2491CrossRefGoogle Scholar
  7. Chen QF, Qin SK, Chen QL (2019) Numerical simulation of ore particle flow behaviour through a single drawpoint under the influence of a flexible barrier. Geofluids 2019:1–11Google Scholar
  8. Doronzo DM (2013) Aeromechanic analysis of pyroclastic density currents past a building. Bull Volcanol 75:684CrossRefGoogle Scholar
  9. Itasca CG (2008) PFC3D (particle flow code in 3dimensions) FISH in PFC3D. Itasca Consulting Group Inc, MinnesotaGoogle Scholar
  10. Jiang HY, Lu JB, Hui FC (2004) Stress distribution in disperse grain pack. J Lanzhou Univ Technol 30:106–109Google Scholar
  11. Kieffer SW (2017) Researching the Earth - and a few of its neighbors. Annu Rev Earth Planet Sci 45:1–29CrossRefGoogle Scholar
  12. Liu YS, Guo LY, Ren ZY (2006) The causes of land landscape changes in semi-arid area of Northwest China: a case study of Yulin city. J Geogr Sci 16:192–198CrossRefGoogle Scholar
  13. Liu Z, Zhou N, Zhang JX (2013) Random gravel model and particle flow based numerical biaxial test of solid backfill materials. Int J Min Sci Technol 23:463–467CrossRefGoogle Scholar
  14. Long RY, Zhang XT (2009) Negative entropy mechanism of the circular economy development countermeasures in mining area. Procedia Earth Planet Sci 22:1678–1685Google Scholar
  15. Milanez B, Oliveira J (2013) Innovation for sustainable development in artisanal mining: Advances in a cluster of opal mining in Brazil. Res Policy 38:427–434CrossRefGoogle Scholar
  16. Rajchenbach J (2001) Stress transmission through textured granular packing. Phys Rev E 63:041301CrossRefGoogle Scholar
  17. Tao GQ, Yang SJ, Ren FY (2009) Experimental study on flow parameters of random medium droplet. Chin J Rock Mech Eng 28:3464–3470Google Scholar
  18. Xu ZL (1982) Elastic mechanics. People’s Publishing House, BeijingGoogle Scholar
  19. Zeng YL (1988) Displacement solution of plane problem of elasticity. Chin J Theor Appl Mech 20:93–98Google Scholar
  20. Zhang SH, Li RF, Liu YX (2006) Study on stress field of caving rock movement. Nonferrous Metal 58:25–27Google Scholar
  21. Zhu ZH, Wang LG, Tu XT (2016) Flow characteristics of discrete ore rock of block caving based on stochastic medium theory. J Northeastern Univ 37:869–874Google Scholar

Copyright information

© Saudi Society for Geosciences 2019

Authors and Affiliations

  1. 1.College of Resources, Environment and MaterialsGuangxi UniversityNanningPeople’s Republic of China

Personalised recommendations