Advertisement

A technical evaluation on the determination of thermal comfort parametric properties of different originated expanded and exfoliated aggregates

  • Lütfullah Gündüz
  • Şevket Onur KalkanEmail author
ICCESEN 2017
  • 10 Downloads
Part of the following topical collections:
  1. Geo-Resources-Earth-Environmental Sciences

Abstract

Nowadays, with increasing global warming, there are increasing concerns about energy saving in many branches in the world. One of these branches is the construction sector. In the construction sector, various building materials are produced to minimize energy losses from buildings. Among these construction materials, cement mortars are widely used. Cement mortars are produced from various raw materials and aggregates. The aggregates, which have expansion properties between these aggregates, have high insulating properties due to their porous structures. In this study, four different expanded/exfoliated aggregates, which are expanded perlite (EP), expanded clay (EC), expanded glass (EG), and exfoliated vermiculite (EV), with suitable unit weight and pore structure for thermal insulation were used in cement mortar. At the end of the experimental study, the thermal behavior of the cement mortars produced was investigated. According to the results of the research, it was determined that the cement mortar produced with expanded perlite was the most suitable for the heat insulation between the tested aggregates.

Keywords

Expanded perlite Expanded clay Expanded glass Exfoliated vermiculite Thermal comfort PACS 81.05.Rm 44.90.+c 

References

  1. Abidi S, Nait-Ali B, Joliff Y, Favotto C (2015) Impact of perlite, vermiculite and cement on the thermal conductivity of a plaster composite material: experimental and numerical approaches. Compos Part B 68:392–400.  https://doi.org/10.1016/j.compositesb.2014.07.030 CrossRefGoogle Scholar
  2. Bayraktar OY, Saglam-Citoglu G, Caglar H, Caglar A, Arslan M, Cetin M (2018) The mechanical properties of the different cooling requirements of high-temperature plaster. Fresenius Environ Bull 27(8):5399–5409Google Scholar
  3. Bilgin F, Arici M (2017) Effect of phase change materials on time lag, decrement factor and heat-saving. Acta Phys Pol A 132(3):1102–1105.  https://doi.org/10.12693/APhysPolA.132.667 CrossRefGoogle Scholar
  4. Ceylan H, Saraç S (2017) The usage of perlitic pumice from İzmir-Menderes (Turkey) in the production of low-strength lightweight concrete. Acta Phys Pol A 132(3):667–669.  https://doi.org/10.12693/APhysPolA.132.667 CrossRefGoogle Scholar
  5. Chung O, Jeong SG, Kim S (2015) Preparation of energy efficient paraffinic PCMs/expanded vermiculite and perlite composites for energy saving in buildings. Sol Energy Mater Sol Cells 137:107–112.  https://doi.org/10.1016/j.solmat.2014.11.001 CrossRefGoogle Scholar
  6. Çetin M (2015) Determining the bioclimatic comfort in Kastamonu city. Environ Monit Assess 187(10):640.  https://doi.org/10.1007/s10661-015-4861-3 CrossRefGoogle Scholar
  7. Çetin M, Adıgüzel F, Kaya O, Sahap A (2018) Mapping of bioclimatic comfort for potential planning using GIS in Aydin. Environ Dev Sustain 20(1):361–375CrossRefGoogle Scholar
  8. Kılınçarslan Ş, Davraz M, Akça M (2018) The effect of pumice as aggregate on the mechanical and thermal properties of foam concrete. Arab J Geosci 11(11):289.  https://doi.org/10.1007/s12517-018-3627-y CrossRefGoogle Scholar
  9. Topay M (2013) Mapping of thermal comfort for outdoor recreation planning using GIS: the case of Isparta Province (Turkey). Turk J Agric For 37(1):110–120Google Scholar
  10. Topay M, Parladir MO (2015) Suitability analysis for alternative tourism activities with the help of GIS: a case study of Isparta province. J Agric Sci 21(2):300–309Google Scholar
  11. TS 825 (2013) Thermal insulation requirements for buildings. TurkeyGoogle Scholar
  12. TS EN 998–1 (2011) Specification for mortar for masonry - part 1: rendering and plastering mortar, TurkeyGoogle Scholar
  13. TS EN ISO 6946 (2017) Building components and building elements - thermal resistance and thermal transmittance - calculation methods, TurkeyGoogle Scholar

Copyright information

© Saudi Society for Geosciences 2019

Authors and Affiliations

  1. 1.Department of Civil Engineeringİzmir Katip Çelebi UniversityİzmirTurkey

Personalised recommendations