Advertisement

A novel binary compound flooding system based on DPG particles for enhancing oil recovery

  • Weitao LiEmail author
  • Falin Wei
  • Chunming Xiong
  • Jian Ouyang
  • Guang Zhao
  • Liming Shao
  • Mingli Dai
ICCESEN 2017
  • 34 Downloads
Part of the following topical collections:
  1. Geo-Resources-Earth-Environmental Sciences

Abstract

Aiming at deep profile control in water flooding reservoirs, a heterogeneous combination flooding system, composed of dispersed particle gel (DPG) and a zwitterionic surfactant (THSB), was developed. The mean particle diameter was adjusted and then the DPG morphology and diameter were characterized using a laser scanning, confocal microscope, and dynamic light scattering. The effects of DPG concentration, temperature, pH, and salinity on THSB interfacial tension (IFT) were investigated. A method for determining DPG concentration was proposed, and the dynamic retention and migration mechanisms of the particles were evaluated, using cores with different permeabilities. Finally, the oil displacement mechanism of the combination flooding system was explored through visual simulation experiments and scanning electron microscopy. The results showed that the particle diameter was 2.5 μm, that compared with a surfactant system, the IFT of the combination flooding system was relatively low, and that the temperature, pH, and NaCl content of solutions had little effect on THSB IFT. Since specific matching relationships between DPG particles and reservoir pore throats existed, the retention amount and injection pressure were improved with the increased core permeability. Visual simulation experiments revealed the oil recovery mechanism of the combination flooding system. This combination flooding system can be used in reservoirs under varied conditions, as the particle diameter can be adjusted on a case-by-case basis, and the THSB surfactant proved to be high-temperature resistant and high-salinity tolerant. The combination flooding system can be applied to deep profile control and oil displacement, in oil fields.

Keywords

Binary compound flooding system DPG particles Interfacial tension Oil displacing mechanism 

References

  1. Akti F, Boran F (2016) Preparation and swelling properties of zeolite-poly(2-hydroxyethyl methacrylate-co-acrylic acid) hydrogel composites. Acta Phys Polon 130:147–149CrossRefGoogle Scholar
  2. Al-Nakhli AR, Bataweel M, Almohsin A, Al-Badairy H (2016) A breakthrough water shutoff system for super-K zones in carbonate Ghawwar field: adsorption and polymer system, in: Abu Dhabi international petroleum exhibition & conference. DOI.  https://doi.org/10.2118/183558-MS
  3. Aveyard R, Binks BP, Mead J (1985) Interfacial tension minima in oil + water + surfactant systems. Effects of salt and temperature in systems containing non-ionic surfactants. J Chem Soc Faraday Trans 81:2155–2168CrossRefGoogle Scholar
  4. Bai B (2007) Preformed particle gel for conformance control: factors affecting its properties and applications. SPE Reserv Eval Eng 10:415–422CrossRefGoogle Scholar
  5. Bai B, Missouri-Rolla UO, Liu Y, Coste JP, Li L (2007) Preformed particle gel for conformance control: transport mechanism through porous media. SPE Reserv Eval Eng 10:176–184CrossRefGoogle Scholar
  6. Barkman JH, Davidson DH (1972) Measuring water quality and predicting well impairment. J Pet Technol 24:865–873CrossRefGoogle Scholar
  7. Bera A, Mandal A, Guha BB (2014) Synergistic effect of surfactant and salt mixture on interfacial tension reduction between crude oil and water in enhanced oil recovery. J Chem Eng Data 59:89–96CrossRefGoogle Scholar
  8. Beycıoğlu A, Çomak B, Akçaabat D (2017) Evaluation of pH value by using image processing. Acta Phys Polon 132:1142–1144CrossRefGoogle Scholar
  9. Brooks RM, Cetin M (2012) Application of construction demolition waste for improving performance of subgrade and subbase layers, international journal of Research & Reviews in. Appl Sci 12:375–381CrossRefGoogle Scholar
  10. Cetin M (2016) Chapter 27 landscape engineering, protecting soil, and runoff storm water, advances in landscape. Architecture:697–722Google Scholar
  11. Chang HL (1978) Polymer flooding technology yesterday, today, and tomorrow. J Pet Technol 30:1113–1128CrossRefGoogle Scholar
  12. Chen CM, Chang CH, Yang YM, Maa JR (2000) Comparisons of the effects of pH on the interfacial tension-lowering activity of surfactants triton X-100 and triton SP-190. Colloids Surf A Physicochem Eng Asp 174:357–365CrossRefGoogle Scholar
  13. Chen Y, Elhag AS, Poon BM, Cui L, Ma K, Liao SY, Reddy PP, Worthen AJ, Hirasaki GJ, Nguyen QP, Biswal SL, Johnston KP (2014) Switchable nonionic to cationic ethoxylated amine surfactants for CO2 enhanced oil recovery in high-temperature, high-salinity carbonate reservoirs. SPE J 19:249–259CrossRefGoogle Scholar
  14. Dai C, Zhao G, Zhao M, You Q (2012) Preparation of dispersed particle gel (DPG) through a simple high speed shearing method. Molecules 17:14484–14489CrossRefGoogle Scholar
  15. Dupuis G, Lesuffleur T, Desbois M, Bouillot J, Zaitoun A (2016) Water conformance treatment using SMG microgels: a successful field case, in: SPE EOR conference at oil and gas West Asia, DOI:  https://doi.org/10.2118/179765-MS
  16. Han B, Li Y, Qian B, He Y, Peng L, Yu H (2018) Adsorption and determination of polycyclic aromatic hydrocarbons in water through the aggregation of graphene oxide. Open Chem 16:716–725CrossRefGoogle Scholar
  17. Hu X, Li Y, Sun H, Song X, Li Q, Cao X, Li Z (2010) Effect of divalent cationic ions on the adsorption behavior of zwitterionic surfactant at silica/solution interface. J Phys Chem B 114:8910–8916CrossRefGoogle Scholar
  18. Huang L, Ning Z, Wang Q, Ye H, Chen Z, Sun Z, Sun F, Qin H (2018) Enhanced gas recovery by CO 2 sequestration in marine shale: a molecular view based on realistic kerogen model. Arab J Geosci 11:404CrossRefGoogle Scholar
  19. Imqam A, Wang Z, Bai B, Delshad M (2016) Effect of heterogeneity on propagation, placement, and conformance control of preformed particle gel treatment in fractures, in: SPE improved Oil Recovery Conference, DOI:  https://doi.org/10.2118/179705-MS
  20. Imqam A, Wang Z, Bai B (2017) Preformed-particle-gel transport through heterogeneous void-space conduits. SPE J 22:1–11CrossRefGoogle Scholar
  21. Jaju FHNMM, Roure F, Matenco L (2016) Optimal aquifers and reservoirs for CCS and EOR in the Kingdom of Saudi Arabia: an overview. Arab J Geosci 9:604CrossRefGoogle Scholar
  22. Kuscu IK, Cetin M, Yigit N, Savaci G, Sevik H (2018) Relationship between enzyme activity (urease-catalase) and nutrient element in soil use. Pol J Environ Stud 27:2107–2112CrossRefGoogle Scholar
  23. Lai N, Zhang X, Ye Z, Li X et al (2014) Laboratory study of an anti-temperature and salt-resistance surfactant-polymer binary combinational flooding as EOR chemical. J Appl Polym Sci 131:596–602Google Scholar
  24. Liu Y, Dai C, Wang K, Zhao M, Gao M, Yang Z, Fang J, Wu Y (2016) Investigation on preparation and profile control mechanisms of the dispersed particle gels (DPG) formed from phenol–formaldehyde cross-linked polymer gel. Ind Eng Chem Res 55:6284–6292CrossRefGoogle Scholar
  25. Lu J, Goudarzi A, Chen P, Kim DH, Delshad M, Mohanty KK, Sepehrnoori K, Weerasooriya UP, Pope GA (2014) Enhanced oil recovery from high-temperature, high-salinity naturally fractured carbonate reservoirs by surfactant flood. J Pet Sci Eng 124:122–131CrossRefGoogle Scholar
  26. Mauran S, Rigaud L, Coudevylle O (2001) Application of the carman–Kozeny correlation to a high-porosity and anisotropic consolidated medium: the compressed expanded natural graphite. Transp Porous Media 43:355–376CrossRefGoogle Scholar
  27. Miah MI, Elhaj MA, Ahmed S, Hossain ME (2018) Modeling of temperature distribution and oil displacement during thermal recovery in porous media: a critical review. Fuel 226:423–440CrossRefGoogle Scholar
  28. Puerto M, Hirasaki GJ, Miller CA, Barnes JR (2010) Surfactant systems for EOR in high-temperature, high-salinity environments. SPE J 17:11–19CrossRefGoogle Scholar
  29. Ram A, Kadim A (1970) Shear degradation of polymer solutions. J Appl Polym Sci 14:2145–2156CrossRefGoogle Scholar
  30. Rui Z, Wang X, Zhang Z, Lu J, Chen G, Zhou X, Patil S (2018) A realistic and integrated model for evaluating oil sands development with steam assisted gravity drainage technology in Canada. Appl Energy 213:76–91CrossRefGoogle Scholar
  31. Scoggins MW, Miller JW (1979) Determination of water-soluble polymers containing primary amide groups using the starch-triiodide method. Soc Pet Eng J 19:151–154CrossRefGoogle Scholar
  32. Seright RS (2010) Potential for polymer flooding reservoirs with viscous oils. SPE Reserv Eval Eng 13:730–740CrossRefGoogle Scholar
  33. Siavashi M, Doranehgard MH (2017) Particle swarm optimization of thermal enhanced oil recovery from oilfields with temperature control. Appl Therm Eng 123:658–669CrossRefGoogle Scholar
  34. Wan T, Wang W, Jiang J, Zhang Y (2018) Pore-scale analysis of gas huff-n-puff enhanced oil recovery and waterflooding process. Fuel 215:561–571CrossRefGoogle Scholar
  35. Wu C (2005) Characterization and polymerization of random copolymer of acrylic acid-methylacrylate. Chinese J Polym Sci 23:21–26CrossRefGoogle Scholar
  36. Wu XC, Xiong C, Han D, Liu H, et al. (2014) A new IOR method for mature Waterflooding reservoirs: “sweep control technology”, in: SPE Asia Pacific oil & gas Conference and exhibition, DOI:  https://doi.org/10.2118/171485-MS
  37. Zhao FJ, Wang YL, Song J, Ma HC, Liu HL (2018) Performance and thermal decomposition analysis of foaming agent NPL-10 for use in heavy oil recovery by steam injection. Open Chem 16:29–34CrossRefGoogle Scholar

Copyright information

© Saudi Society for Geosciences 2019

Authors and Affiliations

  1. 1.Research Institute Petroleum Exploration & DevelopmentBeijingPeople’s Republic of China
  2. 2.China University of Petroleum (East China)QingdaoPeople’s Republic of China

Personalised recommendations