Advertisement

Experimental and numerical analyses on working performance of a high arch dam with deep-seated joints: Yebatan arch dam, China

  • Wen Zhang
  • Yuan Chen
  • Bao-quan YangEmail author
  • Lin Zhang
  • Chong Zhang
  • Xiao-qiang Liu
Original Paper
  • 13 Downloads

Abstract

High arch dams commonly face complicated geological conditions at the dam site, which is particularly prominent in numerous projects in the southwest mountainous area of China. The deep-seated joint is a special geological defect caused by unloading fracturing of the deep rock mass, which is unfavourable to the working performance of high arch dam projects. The Yebatan arch dam is a world-class high arch dam, situated in a deeply carved V-shaped gorge with deep-seated joint zones in both banks. In this paper, both geomechanical model test and numerical analysis are carried out to study the working performance of the Yebatan arch dam and abutment, which are affected by the deep-seated joint zones. The research results demonstrate that the deep-seated joint zones have a significant effect on the arch dam and abutment working performance. It is highly dependent on the location of the class IVS strong relaxed rock mass and the combination with faults. The class IVS strong relaxed rock mass in the left abutment has a great impact on the deformation of arch dam and abutment, and fault f29 (f74) plays a dominant role in controlling the anti-sliding stability of the right abutment. Subsequently, a kind of concrete replacement measure is proposed in order to treat these project weaknesses. The additional numerical analysis results indicate the deformation and stability performance of arch dam and abutment are greatly improved after reinforced. The reinforcement measure is effective for Yebatan project.

Keywords

Deep-seated joint Geomechanical model test Numerical analysis Yebatan arch dam Working performance Reinforcement measure 

Notes

Funding information

This work was supported by the National Key R&D Program of China (Grant No. 2016YFC0401908) and the National Natural Science Foundation of China (Grant No. 51609163).

References

  1. Alejano LR (2012) Drucker–Prager criterion. Rock Mech Rock Eng 45(6):995–999Google Scholar
  2. Barla G, Antolini F, Barla M, Mensi E, Piovano G (2010) Monitoring of the Beauregard landslide (Aosta Valley, Italy) using advanced and conventional techniques. Eng Geol 116(3–4):218–235Google Scholar
  3. Chen Y, Zhang L, Yang GX, Dong JH, Chen JY (2012) Anti-sliding stability of a gravity dam on complicated foundation with multiple structural planes. Int J Rock Mech Min Sci 55(10):151–156Google Scholar
  4. Chen Y, Zhang L, Yang BQ, Dong JH, Chen JY (2015) Geomechanical model test on dam stability and application to Jinping high arch dam. Int J Rock Mech Min Sci 76:1–9Google Scholar
  5. Drucker DC, Prager W (2013) Soil mechanics and plastic analysis or limit design. Qapplmath 10(2):157–165Google Scholar
  6. Fei WP, Zhang L, Zhang R (2010) Experimental study on a geo-mechanical model of a high arch dam. Int J Rock Mech Min Sci 47(2):299–306Google Scholar
  7. Fumagalli IE (1973) Statical and geomechanical models. Springer, New YorkGoogle Scholar
  8. Guo LN, Li TC, Lu SS, Guo YJ (2011) Deep sliding stability analysis of gravity dam based on FEM strength reduction. Adv Mater Res 243–249:4608–4613Google Scholar
  9. Hennig T, Wang W, Feng Y, Ou X, He D (2013) Review of Yunnan’s hydropower development. Comparing small and large hydropower projects regarding their environmental implications and socio-economic consequences. Renew Sust Energ Rev 27:585–595Google Scholar
  10. Lan HX, Wu FQ, Yan FZ, Qi SW (2004) Mechanism of deep cracks in the left bank slope of Jinping first stage hydropower station. Eng Geol 73(1):129–144Google Scholar
  11. Li SQ, Li ZN, Li GQ, Mengd JF, Tang J (2005) Experimental and numerical seismic investigations of the Three Gorges dam. Eng Struct 27:501–513Google Scholar
  12. Li N, Yao XC, Qu X, Zhang CK, Zhang ZQ, Zhou Z (2012) Strengthening treatment and analysis for the left bank abutment of Jinping arch dam. Geomechanik Und Tunnelbau 5(5):497–502Google Scholar
  13. Lin P, Ma TH, Liang ZZ, Tang CA, Wang RK (2014) Failure and overall stability analysis on high arch dam based on DFPA code. Eng Fail Nnal 45(1):164–184Google Scholar
  14. Lin P, Liu XL, Zhou WY, Wang RK, Wang SY (2015) Cracking, stability and slope reinforcement analysis relating to the Jinping dam based on a geomechanical model test. Arab J Geosci 8(7):4393–4410Google Scholar
  15. Lin P, Shi J, Zhou WY, Wang RK (2018) 3D geomechanical model tests on asymmetric reinforcement and overall stability relating to the Jinping I super-high arch dam. Int J Rock Mech Min Sci 102:28–41Google Scholar
  16. Liu YR, Guan FH, Yang Q, Yang RQ, Zhou WY (2013) Geomechanical model test for stability analysis of high arch dam based on small blocks masonry technique. Int J Rock Mech Min Sci 61:231–243Google Scholar
  17. Liu JS, Ding WL, Yang HM, Wang RY, Yin S, Li A, Fu FQ (2017a) 3D geomechanical modeling and numerical simulation of in-situ stress fields in shale reservoirs: a case study of the lower Cambrian Niutitang formation in the Cen’gong block, South China. Tectonophysics 712–713:663–683Google Scholar
  18. Liu, LJ, Zhao QH, Han, G (2017b) Characteristics of deep-seated crack in dam site of Yebatan hydropower station. Chin J Geotech Eng 39(3):501–508 [in Chinese]Google Scholar
  19. Pan JZ, He J (2000) Fifty years of Chinese dam. China Water Power Press, Beijing [in Chinese]Google Scholar
  20. Ren QW, Li Q, Liu S (2012) Research advance in failure risk and local strength failure for high arch dams. Sci Bull 57(36):4672–4682Google Scholar
  21. Shapira J (2015) Efficient 3-D reliability analysis of the 530 m high abutment slope at Jinping I hydropower station during construction. Eng Geol 195(11):269–281Google Scholar
  22. Song SW, Feng XM, Xiang BY, Xing WB, Zeng Y (2011) Research on key technologies for high and steep rock slopes of hydropower engineering in southwest China. Chin J Rock Mech Eng 30(1):1–22 [in Chinese]Google Scholar
  23. Song ZH, Liu YR, Yang Q (2015) Experimental and numerical investigation on the stability of a high arch dam with typical problems of nonsymmetry: Baihetan dam, China. B Eng Geol Environ 75(4):1–16Google Scholar
  24. Sun GH, Zheng H, Liu DF (2011) A three-dimensional procedure for evaluating the stability of gravity dams against deep slide in the foundation. Int J Rock Mech Min Sci 48(3):421–426Google Scholar
  25. Wang GJ, Xie MW, Chai XQ, Dong CX (2013) D-InSAR-based landslide location and monitoring at Wudongde hydropower reservoir in China. Environ Earth Sci 69(8):2763–2777Google Scholar
  26. Yang BQ, Zhang L, Liu EL, Dong JH, Zhu HH, Chen Y (2015) Deformation monitoring of geomechanical model test and its application in overall stability analysis of a high arch dam. J Sensors 2015(5):1–12Google Scholar
  27. Yin Y, Huang B, Wang S, Li J (2015) Potential for a Ganhaizi landslide-generated surge in Xiluodu Reservoir, Jinsha River, China. Environ Earth Sci 73(7):3187–3196Google Scholar
  28. Zhang L, Chen Y, Yang BQ, Dong JH, Chen JY (2009) Hydraulic model test of dam and foundation and its engineering application. Sichuan University Press, Chengdu [in Chinese]Google Scholar
  29. Zhang L, Liu YR, Yang Q, Yang RQ (2014) Research on geomechanical model test of Dagangshan high arch dam based on block masonry technique. Engineering Mechanics 17(8):695–703 [in Chinese]Google Scholar
  30. Zhang L, Liu YR, Yang Q (2015) Evaluation of reinforcement and analysis of stability of a high-arch dam based on geomechanical model testing. Rock Mech Rock Eng 48(2):803–818Google Scholar
  31. Zhou W, Chang XL, Zhou CB, Liu XH (2008a) Failure analysis of high-concrete gravity dam based on strength reserve factor method. Comput Geotech 35(4):627–636Google Scholar
  32. Zhou WY, Lin P, Yang Q, Yang RQ, Zhou Z (2008b) Experimental research on stability of Jinping high slope with three-dimensional geomechanical model. Chin J Rock Mech Eng 27(5):893–901 [in Chinese]Google Scholar
  33. Zhu WS, Zhang QB, Zhu HH, Li Y, Yin JH, Li SC, Sun LF, Zhang L (2010) Large-scale geomechanical model testing of an underground cavern group in a true three-dimensional (3-D) stress state. Can Geotech J 47:935–946Google Scholar
  34. Zhu HE, Liu YR, Pan YW, Qiang Y (2015) Evaluating the safety of high arch dams with fractures based on numerical simulation and geomechanical model testing. Sci China Technol Sc 58(10):1648–1659Google Scholar
  35. Zuo QD (1984) The theory and method of model test. Water Resources and Electric Power Press, Beijing [in Chinese]Google Scholar

Copyright information

© Saudi Society for Geosciences 2019

Authors and Affiliations

  1. 1.State Key Laboratory of Hydraulics and Mountain River Engineering, College of Water Resources and HydropowerSichuan UniversityChengduChina
  2. 2.Power China Chengdu Engineering Corporation LimitedChengduChina

Personalised recommendations