International Journal of Material Forming

, Volume 13, Issue 1, pp 159–160 | Cite as

Correction to: Prediction of strain distribution and four, six, or eight ears depending on single-crystal orientation using a new single crystal criterion

  • Nitin Chandola
  • Oana CazacuEmail author
  • Benoit Revil-Baudard
Correction to: International Journal of Material Forming
Fig. 3

Predicted anisotropy in plastic properties: (a) variation of the yield stress ratios σ(α)/σ(0) and, (b) Lankford coefficients r(α) with respect to the angle α between the loading axis and the RD axis [100] in the {100}〈001〉 plane corresponding to: m2 =1.39, n1=2.42, n3 =0.37, n4 =6.8, c = 0.35 based on yield stress data for an Al 5% Cu single crystal reported in [26]

In the original publication of this paper, an incorrect image of Figure 3 was used in error. Please see below for the correct image.


Copyright information

© Springer-Verlag France SAS, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Department of Mechanical and Aerospace EngineeringUniversity of Florida, REEFShalimarUSA

Personalised recommendations