Advertisement

Fibers and Polymers

, Volume 20, Issue 1, pp 210–215 | Cite as

Effect of Process Parameters on Three-dimensional Formability of Warp-knitted Polypropylene Hernia Repair Mesh

  • Tong Yang
  • Wanli Xu
  • Pibo MaEmail author
Communication
  • 29 Downloads

Abstract

The three-dimensional forming property of the hernia repair mesh is very important in the application. In order to study the correlation between process parameters and formability property, three variables are set for the test: diameter of raw materials, structure and drawing-off density. Results show that within a certain range, the forming performance of the patch becomes better with the increasing of the diameter of raw materials, and comparing with the double-comb opening through structure, the forming properties of the double-comb velveteen structure are better. Besides, in the same conditions, the forming property is better with the draw-off density increases.

Keywords

Warp-knitted Polypropylene Hernia repair mesh Three-dimensional formability 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    E. Iversen, A. Lykke, and M. Hensler, Hernia, 14, 555 (2010).CrossRefGoogle Scholar
  2. 2.
    Y. Bilsel and I. Abci, Int. J. Surg., 10, 317 (2012).CrossRefGoogle Scholar
  3. 3.
    H. Minhui, L. Xidong, and H. Rongkang, Macromol. Biosci., 18, 1 (2018).Google Scholar
  4. 4.
    A. Baktir, O. Dogru, and M. Girgin, Hernia, 17, 249 (2013).CrossRefGoogle Scholar
  5. 5.
    S. Bringman, J. Conze, and D. Cuccurullo, Hernia, 14, 81 (2010).CrossRefGoogle Scholar
  6. 6.
    A. M. S.S. Ibrahim, C. R. Vargas, and S. Colakoglu, J. Reconstructive Microsurgery, 31, 83 (2015).CrossRefGoogle Scholar
  7. 7.
    N. Sanbhal, L. Limiao, and R. Xu, J. Ind. Text., 48, 333 (2018).CrossRefGoogle Scholar
  8. 8.
    L. R. Khan, S. Liong, and A. C. De Beaux, Hernia, 14, 39 (2010).CrossRefGoogle Scholar
  9. 9.
    , S. William and Burns, J. Surgical Res., 136, 1 (2006).CrossRefGoogle Scholar
  10. 10.
    S. Ajeli, Jeddi, A. A. Ali, and A. Rastgo, J. Text. Inst., 100, 496 (2009).CrossRefGoogle Scholar

Copyright information

© The Korean Fiber Society 2019

Authors and Affiliations

  1. 1.Engineering Research Center for Knitting Technology, Ministry of Education, College of Textile and ClothingJiangnan UniversityWuxiChina
  2. 2.State Key Laboratory of Bio-Fibers and Eco-TextilesQingdao UniversityQingdaoChina

Personalised recommendations