Advertisement

Journal of Mechanical Science and Technology

, Volume 33, Issue 4, pp 1937–1946 | Cite as

Investigation of combustion and emission characteristics of n-hexane and n-hexadecane additives in diesel fuel

  • Cihan BayindirliEmail author
  • Mehmet Celik
Article
  • 5 Downloads

Abstract

One of the most important basic requirements of diesel-powered vehicles that they have lower pollutant emissions and fuel consumption. In diesel engines, combustion and engine performance are influenced by the physical and chemical properties of the used fuel. Engine design studies are not enough to increase engine performance and reduce exhaust emissions alone. By adding fuel additives in diesel fuel, the physical and chemical properties of the fuel can be improved. Fuel additives affect engine performance, combustion and emissions positively by exerting catalyst effect during combustion. In this study, n-hexane and n-hexadecane were added in diesel fuel (D0) by volume of 4, 12 % and 20 %. With respect to D0 fuel, in DHD20 and DHX20 fuels engine torque increased by 1.60 % and 1.32 %, respectively, while the brake specific fuel consumption decreased by 3.12 % and 1.98 %, respectively. Maximum cylinder pressures and heat release rate values of the ingredient added fuels increased. It was seen that NOx emissions increased while HC, CO and soot emissions decreased with increasing contribution ratio.

Keywords

Diesel engines Fuel additive Combustion Exhaust emissions 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    J. I. J. Lalvani, M. Parthasarathy, B. Dhinesh and K. S. Annamalai, Experimental investigation of combustion, performance and emission characteristics of a modified piston, Journal of Mechanical Science and Technol., 29 (10) (2015) 4519–4525.CrossRefGoogle Scholar
  2. [2]
    J. A. Datta and B. K. Mandal, Numerical investigation of the performance and emission parameters of a diesel engine fuelled with diesel — biodiesel — methanol blends, Journal of Mechanical Science and Technol., 30 (4) (2016) 1923–1929.CrossRefGoogle Scholar
  3. [3]
    A. Oliveira, A. M. Morais, O. S. Valente and J. R. Sodré, Combustion characteristics, performance and emissions from a diesel power generator fuelled by B7-ethanol blends, Fuel Process. Technol., 139 (2015) 67–72.CrossRefGoogle Scholar
  4. [4]
    Y. Wang, Z. Tao, B. Wu, J. Xu, C. Huo, K. Li, H. Chen, Y. Yang and Y. Li, Effect of metal precursors on the performance of Pt/ZSM-22 catalysts for n-hexadecane hydroisomerization, Journal of Catalysis, 322 (2015) 1–13.CrossRefGoogle Scholar
  5. [5]
    H. Omidvarborna, A. Kumar and D. Kim, NOx emissions from low-temperature combustion of biodiesel made of various feedstocks and blends, Fuel Process. Technol., 140 (2015) 113–118.CrossRefGoogle Scholar
  6. [6]
    M. A. Lenin, M. R. Swaminathan and G. Kumaresan, Performance and emission characteristics of a DI diesel engine with a nanofuel additive, Fuel, 109 (2013) 362–365.CrossRefGoogle Scholar
  7. [7]
    M. S. Moghaddam and A. Z. Moghaddam, Performance and exhaust emission characteristics of a CI engine fueled with diesel-nitrogenated additives, Chemical Engineering Research and Design, 92 (2014) (4) 720–726.CrossRefGoogle Scholar
  8. [8]
    S. A. Basha and K. R. Gopal, A review of the effects of catalyst and additive on biodiesel production, performance, combustion and emission characteristics, Renewable and Sustainable Energy Reviews, 16 (2012) 711–717.CrossRefGoogle Scholar
  9. [9]
    M. Mangus, F. Kiani, J. Mattson, D. Tabakh, J. Petka, C. Depcik, E. Peltier and S. Stagg-Williams, Investigating the compression ignition combustion of multiple biodiesel/ULSD (ultra-low sulfur diesel) blends via commonrail injection, Energy, 89 (2015) 932–945.CrossRefGoogle Scholar
  10. [10]
    S. H. Park, H. J. Kim, H. K. Suh and C. S. Lee, Experimental and numerical analysis of spray-atomization characteristics of biodiesel fuel in various fuel and ambient temperatures condition, International Journal of Heat and Fluid Flow, 30 (2009) 960–970.CrossRefGoogle Scholar
  11. [11]
    C. Patel, S. Lee, N. Tiwari, A. K. Agarwal, C. S. Lee and S. Park, Spray characterization, combustion, noise and vibrations investigations of Jatropha biodiesel fuelled genset engine, Fuel, 185 (2016) 410–420.CrossRefGoogle Scholar
  12. [12]
    M. Gülüm and A. Bilgin, Density, flash point and heating value variations of corn oil biodiesel-diesel fuel blends, Fuel Process. Technol., 134 (2015) 456–464.CrossRefGoogle Scholar
  13. [13]
    A. K. Agarwal, S. Som, P. C. Shukla, H. Goyal and D. Longman, In-nozzle flow and spray characteristics for mineral diesel, karanja, and jatropha biodiesels, Applied Energy, 156 (2015) 138–148.CrossRefGoogle Scholar
  14. [14]
    H. M. Poon, K. M. Pang, H. K. Ng, S. Gan and J. Schramm, Development of multi-component diesel surrogate fuel models-Part I: Validation of reduced mechanisms of diesel fuel constituents in 0-D kinetic simulations, Fuel, 180 (2016) 433–441.CrossRefGoogle Scholar
  15. [15]
    M. Shahabuddin, A. M. Liaquat, H. H. Masjuki, M. A. Kalam and M. Mofijur, Ignition delay, combustion and emission characteristics of diesel engine fueled with biodiesel, Renewable and Sustainable Energy Reviews, 21 (2013) 623–632.CrossRefGoogle Scholar
  16. [16]
    X. Wang, X. Wang and J. Chen, Experimental investigations of density and dynamic viscosity of n-hexadecane with three fatty acid methyl esters, Fuel, 166 (2016) 553–559.CrossRefGoogle Scholar
  17. [17]
    X. Xiao, B. Yan, J. Fu and X. Xiao, Absorption and recovery of n-hexane in aqueous solutions of fluorocarbon surfactants, Journal of Environmental Sciences, 37 (2015) 163–171.CrossRefGoogle Scholar
  18. [18]
    M. Çelik and Y. Ö. Özgören, The determination of effects of soybean and hazelnut methyl ester addition to the diesel fuel on the engine performance and exhaust emissions, Applied Thermal Engineering, 124 (2017) 124–135.CrossRefGoogle Scholar
  19. [19]
    C. Sui, E. Song, D. Stapersma and Y. Ding, Mean value modelling of diesel engine combustion based on parameterized finite stage cylinder process, Ocean Engineering, 136 (2017) 218–232.CrossRefGoogle Scholar
  20. [20]
    H. E. Saleh and M. Y. E. Selim, Improving the performance and emission characteristics of a diesel engine fueled by jojoba methyl ester-diesel-ethanol ternary blends, Fuel, 207 (2017) 690–701.CrossRefGoogle Scholar
  21. [21]
    A. Nalgundwar, B. Paul and S. K. Sharma, Comparison of performance and emissions characteristics of DI CI engine fueled with dual biodiesel blends of palm and jatropha, Fuel, 173 (2016) 172–179.CrossRefGoogle Scholar
  22. [22]
    E. Öztürk, Performance, emissions, combustion and injection characteristics of a diesel engine fuelled with canola oil-hazelnut soapstock biodiesel mixture, Fuel Process. Technol., 129 (2015) 183–191.CrossRefGoogle Scholar
  23. [23]
    G. Dhamodaran, R. Krishnan, Y. K. Pochareddy, H. M. Pyarelal, H. Sivasubramanian and A. K. Ganeshram, A comparative study of combustion, emission, and performance characteristics of rice-bran, neem, and cottonseed-oil biodiesels with varying degree of unsaturation, Fuel, 187 (2017) 296–305.CrossRefGoogle Scholar
  24. [24]
    A. Datta and B. K. Mandal, Engine performance, combustion and emission characteristics of a compression ignition engine operating on different biodiesel-alcohol blends, Energy, 125 (2017) 470–483.CrossRefGoogle Scholar
  25. [25]
    H. Bayındır, M. Z. Işık, Z. Argunhan, H. L. Yücel and H. Aydın, Combustion, performance and emissions of a diesel power generator fueled with biodiesel-kerosene and biodiesel- kerosene-diesel blends, Energy, 123 (2017) 241–251.CrossRefGoogle Scholar
  26. [26]
    H. Venu and V. Madhavan, Influence of diethyl ether (DEE) addition in ethanol-biodiesel-diesel (EBD) and methanol-biodiesel-diesel (MBD) blends in a diesel engine, Fuel, 189 (2017) 377–390.CrossRefGoogle Scholar
  27. [27]
    C. W. Oo, M. Shioji, S. Nakao, N. N. Dung, I. Reksowardojo, S. A. Roces and N. P. Dugos, Ignition and combustion characteristics of various biodiesel fuels (BDFs), Fuel, 158 (2015) 279–287.CrossRefGoogle Scholar
  28. [28]
    V. K. Kaimal and P. Vijayabalan, A detailed study of combustion characteristics of a DI diesel engine using waste plastic oil and its blends, Energy Convers. and Manag., 105 (2015) 951–956.CrossRefGoogle Scholar
  29. [29]
    H. Xiao, B. Hou, P. Zeng, A. Jiang, X. Hou and J. Liu, Combustion and emission characteristics of diesel engine fueled with 2.5-dimethylfuran and diesel blends, Fuel, 192 (2017) 53–59.CrossRefGoogle Scholar
  30. [30]
    S. Çetinkaya, Thermodynamics (1999) ISBN 975-591-071-9.Google Scholar
  31. [31]
    T. K. Gogoi and D. C. Baruah, The use of koroch seed oil methyl ester blends as fuel in a diesel engine, Applied Energy, 88 (2011) 2713–2725.CrossRefGoogle Scholar
  32. [32]
    H. Xiao, P. Zeng, Z. Li, L. Zhao and X. Fu, Combustion performance and emissions of 2-methylfuran diesel blends in a diesel engine, Fuel, 175 (2016) 157–163.CrossRefGoogle Scholar
  33. [33]
    I. M. Monirul, M. A. Kalam, H. H. Masjuki, N. W. M. Zulkifli, S. A. Shahir, M. H. Mosarof and A. M. Ruhul, Influence of poly (methyl acrylate) additive on cold flow properties of coconut biodiesel blends and exhaust gas emissions, Renewable Energy, 101 (2017) 702–712.CrossRefGoogle Scholar
  34. [34]
    H. An, W. M. Yang, A. Maghbouli, J. Li, S. K. Chou, K. J. Chua, J. X. Wang and L. Li, Numerical investigation on the combustion and emission characteristics of a hydrogen assisted biodiesel combustion in a diesel engine, Fuel, 120 (2014) 186–194.CrossRefGoogle Scholar
  35. [35]
    Y. H. Tan, M. O. Abdullah, C. Nolasco-Hipolito, N. S. A. Zauzi and G. W. Abdullah, Engine performance and emissions characteristics of a diesel engine fueled with diesel-biodiesel-bioethanol emulsions, Energy Convers. and Manag., 132 (2017) 54–64.CrossRefGoogle Scholar
  36. [36]
    K. Velmurugan and A. P. Sathiyagnanam, Impact of antioxidants on NOx emissions from a mango seed biodiesel powered DI diesel engine, Alexandria Engineering Journal, 55 (2016) 715–722.CrossRefGoogle Scholar
  37. [37]
    G. Karavalakis, K. C. Johnson, M. Hajbabaei and T. D. Durbin, Application of low-level biodiesel blends on heavy-duty (diesel) engines: Feedstock implications on NOx and particulate emissions, Fuel, 181 (2016) 259–268.CrossRefGoogle Scholar
  38. [38]
    H. Song and T. J. Jacobs, The influence of soot radiation on NO emission in practical biodiesel combustion, Fuel, 128 (2014) 281–287.CrossRefGoogle Scholar

Copyright information

© KSME & Springer 2019

Authors and Affiliations

  1. 1.Nigde Vocational School of Technical SciencesNigde Omer Halisdemir UniversityNigdeTurkey

Personalised recommendations