Analysis of flow transition and separation on oscillating airfoil by pressure signature
- 3 Downloads
To have a better understanding of the unsteady aerodynamic characteristics of the airfoil which play important roles in wind turbine blade design, we investigated the boundary layer transition and separation on oscillating airfoil S809 using pressure signature captured in wind tunnel testing. The developed data processing technique of “sliding window” was applied to get useful transition and separation information. Meanwhile, the hysteresis effects of oscillation frequency on transition and separation were studied. It is found that (1) the root mean square (RMS) of pressure signature can indicate the transition and separation with the dimensionless window width of \(\bar m = 0.0015\) (2) the transitional attack of angle in up stroke is larger than that in down stroke at the state of the relative chord length of x/c ≥ 0.14, while the situation is opposite at the state of the relative chord length of x/c ≤ 0.14; (3) the flow separation is advanced and the reattachment is delayed with the increase of the oscillation frequency, which results in a greater hysteresis effect. The sliding window technique, whose parameters were determined in this paper, is effective for detecting boundary layer transition and separation from pressure signature.
KeywordsPressure signature Transition and separation Sliding window Hysteresis effect
Unable to display preview. Download preview PDF.
- A. Klein et al., Unsteady criteria for rotor blade airfoil design, 35th European Rotorcraft Forum, Hamburg, Germany (2009).Google Scholar
- K. W. Mcalister, O. Lambert and D. Petot, Application of the ONERA model of dynamic stall, NASA TP–2399 (1984).Google Scholar
- A. Jameson, Time dependent calculations using multigrid, with applications to unsteady flows past airfoils and wings, Computational Fluid Dynamics Conference (1991) Doi: 10.2514/6.1991–1596.Google Scholar
- M. Pascazio et al., Unsteady boundary-layer measurement on oscillating airfoils-Transition and separation phenomena in pitching motion, Aerospace Sciences Meeting and Exhibit (1996) Doi: 10.2514/6.1996–35.Google Scholar
- F. R. Marzabadi and M. R. Soltani, Effect of leading-edge roughness on boundary layer transition of an oscillating airfoil, Scientia Iranica, 20 (3) (2013) 508–515.Google Scholar
- R. H. M. Giepman, F. F. J. Schrijer and B. W. van Oudheusden, Infrared thermography measurements on a moving boundary-layer transition front in supersonic flow, AIAA J. (2015) 1–5, Doi: 10.2514/1.J053910.Google Scholar
- E. Schülein, H. Rosemann and S. Schaber, Transition detection and skin friction measurements on rotating propeller blades, Paper AIAA-2012-3202, 28th AIAA Aerodynamic Measurement Technology, Ground Testing and Flight Testing Conference, New Orleans, Louisiana, 25–28 June (2012) Doi: 10.2514/6.2012-3202.CrossRefGoogle Scholar
- T. L. Lewis and R. D. Banner, Boundary layer transition detection on the X-15 vertical fin using surface-pressure-fluctuation measurements, NASA TM X-2466 (1971).Google Scholar