In this paper, the wind resistance performance test and numerical simulation analysis of aluminum alloy columns with different structural measures in unit glass curtain walls are carried out. The two-layer experimental model were composed of 12 unit curtain walls, of which there are 2 beams at a distance of 1.2 m from the top and bottom in 9 unit curtain walls respectively, and there is only one beam at a distance of 1.2 m from the top in 3 unit curtain walls. The dimension of each unit curtain wall is 1.2 m × 4.0 m. The section shape of the experimental model is L-shaped. Firstly, the experimental investigation and analysis of the model with arrangement of one pair of hooks under positive and negative wind were carried out. Secondly, the experimental investigation and analysis of the model with no hooks under positive and negative wind were carried out. The out-of-plane deformation, in-plane deformation and the strain of the columns were collected and analyzed. Finally, finite element analysis model was established. The similarities and differences of the analysis results and the experimental results were analyzed. The results show that the beam has a small constraint on the columns whether the wind pressure is positive or negative when the number and position of hooks are reasonable. When the wind pressure is negative, the hook has little effect on the out-of-plane deformation and stability. Under the action of positive wind, the hooks can significantly reduce the in-plane deformation and restrain the lateral torsion deformation of the columns.
This is a preview of subscription content, log in to check access.
Buy single article
Instant access to the full article PDF.
Price includes VAT for USA
Aiello C, Caterino N, Maddaloni G, Bonati A, Franco A, Occhiuzzi A (2018) Experimental and numerical investigation of cyclic response of a glass curtain wall for seismic performance assessment. Construction and Building Materials 187:596–609, DOI: https://doi.org/10.1016/j.conbuildmat.2018.07.237
Azari-N R, Kim YW (2012) Comparative assessment of life cycle impacts of curtain wall mullions. Building and Environment 48:135–145, DOI: https://doi.org/10.1016/j.buildenv.2011.09.010
Chang Y, Liu M, Wang P (2016) Interacted buckling failure of thin-walled irregular-shaped aluminum alloy column under axial compression. Thin-Walled Structures 107:627–647, DOI: https://doi.org/10.1016/j.tws.2016.07.008
Guo X, Xiong Z, Shen Z (2015) Flexural-torsional buckling behavior of aluminum alloy beams. Frontiers Structural Civil Engineering 9:163–175, DOI: https://doi.org/10.1007/s11709-014-0272-8
Hui C, Zhu YZ, Wang B, Wang YQ, Tao W (2015) Experimental and theoretical investigation on mechanical performance of aluminum alloy beams in unit curtain walls. Advances in Structural Engineering 18(12):2103–2116, DOI: https://doi.org/10.1260/1369-43126.96.36.1993
Mazzolani FM, Piluso V, Rizzano G (2011) Local buckling of aluminum alloy angles under uniform compression. Journal of Structural Engineering 137(2):173–184, DOI: https://doi.org/10.1061/(ASCE)ST.1943-541X.0000289
Park HS, Won JH, Chung WJ (2018) Wind resistance performance evaluation of cable-type curtain wall system on reinforced concrete high-rise buildings. International Journal of Concrete Structures and Materials 83(12):1–11, DOI: https://doi.org/10.1186/s40069-018-0320-1
Su MN, Young B, Gardner L (2014) Testing and design of aluminum alloy cross sections in compression. Journal of Structural Engineering 140(9):758–782, DOI: https://doi.org/10.1061/(ASCE)ST.1943-541X.0000972
Szymczak C, Kujawa M (2018) Torsional buckling and post-buckling of columns made of aluminium alloy. Applied Mathematical Modelling 60(8):711–720, DOI: https://doi.org/10.1016/j.apm.2018.03.040
Wang YQ, Yuan HX, Chang T, Du XX, Yu M (2017) Compressive buckling strength of extruded aluminium alloy I-section columns with fixed-pinned end conditions. Thin-Walled Structures 119:396–403, DOI: https://doi.org/10.1016/j.tws.2017.06.034
Yamashita M, Kenmotsu H, Hattori T (2012) Dynamic axial compression of aluminum hollow tubes with hat cross-section and buckling initiator using inertia force during impact. Thin-Walled Structures 50:37–44, DOI: https://doi.org/10.1016/j.tws.2011.10.001
Yuan HX, Wang YQ, Chang T, Du XX, Bu YD, Shi YJ (2015) Local buckling and postbuckling strength of extruded aluminium alloy stub columns with slender I-sections. Thin-Walled Structures 90:40–149, DOI: https://doi.org/10.1016/j.tws.2015.01.013
Zhu JH, Young B (2009) Design of aluminum alloy flexural members using direct strength method. Journal of Structural Engineering 135(5):558–566, DOI: https://doi.org/10.1061/(ASCE)ST.1943-541X.0000004
Ziółkowski A, Imiełowski S (2011) Buckling and post-buckling behaviour of prismatic aluminium columns submitted to a series of compressive loads. Experimental Mechanics 51(8):1335–1345, DOI: https://doi.org/10.1007/s11340-010-9455-y
This study is funded by the Key Scientific Research Project of Institution of Higher Education in Henan Province (20A560026) and Training Plan for Young Key Teachers in Institution of Higher Education in Henan Province (2019GGJS147). This paper is revised under the help of Prof. John J. Myers, who is from Missouri University of Science and Technology.
About this article
Cite this article
Hui, C., Shang, Q., Liu, P. et al. Experimental and Numerical Investigation on Load-Bearing Performance of Aluminum Alloy Upright Column in Curtain Walls under Wind Pressure. KSCE J Civ Eng 24, 847–855 (2020). https://doi.org/10.1007/s12205-020-0753-3
- Unit glass curtain wall
- Aluminum alloy column
- Wind resistance performance
- Experimental study
- Numerical simulation