Advertisement

KSCE Journal of Civil Engineering

, Volume 23, Issue 4, pp 1586–1599 | Cite as

Calculating Jacking Forces for Circular Pipes with Welding Flange Slabs from a Combined Theory and Case Study

  • Pengjiao Jia
  • Baofeng Jiang
  • Wen ZhaoEmail author
  • Yongping Guan
  • Jianyong Han
  • Cheng Cheng
Geotechnical Engineering
  • 25 Downloads

Abstract

Recently, the Steel Tube Slab (STS) curtain method has been successfully used in the construction of ultra-shallow metro stations in modern urban areas. By using the STS curtain method, the external surfaces of pipes are welded with flange slabs, and then the pipes are jacked into soils. However, the nature and extent of the influence of flange slabs on the calculation of jacking force is unclear. This paper presents the first combined theoretical and case study to calculate the increase of jacking forces for circular steel pipes with welded flange slabs during the entire jacking process. The increase of jacking forces was assumed to balance the friction at the soil-pipeline interface. Theoretical formulae were firstly developed to calculate earth pressure based on pressure arch theory and elastic foundation beam theory. A case study was then performed to verify the theoretical results with the field data from Olympic Metro Station on the Shenyang Metro Line 9 in China. Subsequently, factors influencing the calculation of jacking force were analyzed and discussed. Results show that the theoretical formulae produced good results with minor errors. The implications of these findings regarding the prediction of jacking force and selection of hydraulic jack are discussed.

Keywords

STS curtain method pipe-jacking jacking force earth pressure pressure arch theory underground station 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. ATV A-161E (1990). Structural calculation of driven pipes, German Association for Water, Wastewater and Waste, Germany.Google Scholar
  2. Barla, M., Camusso, M., and Aiassa, S. (2006). “Analysis of jacking forces during microtunnelling in limestone.” Tunnelling and Underground Space Technology, Vol. 21, No. 6, pp. 668–683. DOI: 10.1016/j.tust.2006.01.002.CrossRefGoogle Scholar
  3. Beckmann, D., Stein, R., Fabri, T., and Uhlenbroch, A. (2007) “CoJack -A new statics method of computing and controlling pipe jacking.” Tunnelling and Underground Space Technology, Vol. 22, Nos. 5–6, pp. 587–599, DOI: 10.1016/j.tust.2007.02.006.CrossRefGoogle Scholar
  4. Bezih, K., Chateauneuf, A., Kalla, M., and Bacconnet, C. (2015). “Effect of sol-structure interaction on the reliability of reinforced concrete bridges.” Ain Shams Engineering Journal, Vol. 6, No. 3, pp. 755–766. DOI: 10.1016/j.asej.2015.01.007.CrossRefGoogle Scholar
  5. Chapman, D. N. and Ichioka, Y. (1999). “Prediction of jacking forces for microtunnelling operations.” Tunnelling and Underground Space Technology, Vol.14, No, Supp. 1, pp. 31–41. DOI: 10.1016/S0886-7798(99)00019-X.CrossRefGoogle Scholar
  6. Cho, S. H., Kim, J., Won, J., and Kim, M. K. (2016). “Effects of jack force and construction steps on the change of lining stresses in a TBM tunnel.” KSCE Journal of Civil Engineering, Vol. 21, No. 4, pp. 1135–1146. DOI: 10.1007/s12205-016-0391-y.CrossRefGoogle Scholar
  7. GB50021-2001 (2002). Code for investigation of geotechnical engineering, Comprehensive Survey and Design Institute of the Ministry of Construction, Beijing, China.Google Scholar
  8. GB 50332–2002 (2002). Structural design code for pipelines of water supply and waste water engineering, Beijing Municipal Engineering Design & Research Institute, Beijing, China.Google Scholar
  9. Geotechnical Investigation Report (2012). Shenyang Metro Line 9 Olympic Station, Shenkan Engineering Technology Corporation, Shenyang, China.Google Scholar
  10. Geotechnical Supplement Investigation Report (2018). Shenyang Metro Line 9 Olympic Station, Shenkan Engineering Technology Corporation, Shenyang, China.Google Scholar
  11. Guan, Y. P. (2015). Research on mechanical property of the STS (Steel Tube Slab) structure used to construct shallow buried subway station, PhD Thesis, Northeastern University, Shenyang, China.Google Scholar
  12. Jia, P. J., Zhao W., Chen, Y. Li, S. G., Han, J. Y., and Dong, J. C. (2018). “A case study on the application of the steel tube slab structure in construction of a subway station.” Applied Sciences, No. 8, p. 1437, DOI: 10.3390/app8091437.CrossRefGoogle Scholar
  13. Jia, P. J., Zhao W., Hao, Y. C., and Han, J. Y. (2016). “Numerical analysis of the mechanical properties of steel tube slab component under different structural parameters.” Journal of Northeastern University (Natural Science), Vol. 37, No. 8, pp. 1177–1181, DOI: 10.3969/j.issn.1005-3026.2016.08.023.Google Scholar
  14. Jiang, B.F., Zhao, W., Jia, P. J., and Cheng, C. (2018). “Jacking forces of fringed STS pipe based on stress arch theory.” Journal of Northeastern University (Natural Science), Vol. 39, No. 4, pp. 589–593, DOI: 10.12068/j.issn.1005-3026.2018.04.027.Google Scholar
  15. Kim (2007). A study on the structural safety of the complex underground structure using steel tubular roof, MSc Thesis, Yonsei University, Seoul, Korea.Google Scholar
  16. Li, H. G., Yang, Y. Y., Tu X. M., and Wang T. (2012). Analysis of jacking force for rectangular pipe-jacking machine, Przeglad Elektrotechniczny (Electrical Review), Vol. 88, No. 9b, pp. 200–203.Google Scholar
  17. Marshall (1998). Pipe-jacked tunnellling: Jacking loads and ground movements, PhD Thesis, University of Oxford, Oxford, England.Google Scholar
  18. Ning, B. K., Chen, S. L., and Yang, J. (2005). “Interrelation of physical and mechanical indexes on regional clay.” Soil Engineering and Foundation, Vol. 19, No. 1, pp. 51–53, DOI: 10.3969/j.issn.1004-3152.2005.01.014.Google Scholar
  19. Ong, D. E. L. and Choo, C. S. (2016). “Back-analysis and finite element modeling of jacking forces in weathered rocks.” Tunnelling and Underground Space Technology, Vol. 51, No. 1, pp. 1–10, DOI: 10.1016/j.tust.2015.10.014.CrossRefGoogle Scholar
  20. Pellet-Beaucour, A. L. and Kastner, R. (2002). “Experimental and analytical study of friction forces during microtunneling operations.” Tunnelling and Underground Space Technology, Vol. 17, No. 1, pp. 83–97, DOI: 10.1016/S0886-7798(01)00044-X.CrossRefGoogle Scholar
  21. Röhner, R. and Hoch, A. (2010). “Calculation of jacking force by new ATV A-161.” Tunneling and Underground Space Technology, Vol. 25, No. 6, pp. 731–735, DOI: 10.1016/j.tust.2009.11.005.CrossRefGoogle Scholar
  22. Sadaghiani, M. H. and Dadizadeh, S. (2010). “Study on the effect of a new construction method for a large span metro underground station in Tabriz-Iran.” Tunnelling and Underground Space Technology, Vol. 25, No. 1, pp. 63–69, DOI: 10.1016/j.tust.2009.08.004.CrossRefGoogle Scholar
  23. Shou, K. J. and Jiang, J. M. (2010). “A study of jacking force for a curved pipe jacking.” Journal of Rock Mechanics and Geotechnical Engineering, Vol. 2, No. 4, pp. 298–304, DOI: 10.3724/SP.J.1235.2010.00298.MathSciNetGoogle Scholar
  24. Sofiano, A. I., Loukas, P., and Chantzakos, C. H. (2004). “Pipe jacking a sewer under Athens.” Tunnelling and Underground Space Technology, Vol. 19, No. 2, pp. 193–203, DOI: 10.1016/S0886-7798(03)00108-1.CrossRefGoogle Scholar
  25. Staheli (2006). Jacking Force Prediction: An Interface Friction Approach Based on Pipe Surface Roughness, PhD Thesis, Georgia Institute of Technology, Atlanta, USA.Google Scholar
  26. Tang H. S., Liu, S. Z., and Mo, H. H. (2004). “Discussion on theoretical formulae of lateral friction resistance for pipe-jacking.” Rock and Soil Mechanics, Vol. 25, No. Supp. 2, pp. 574–580, DOI: 10.3969/j.issn.1000-7598.2004.z2.121.Google Scholar
  27. Terzaghi (1943). Theoretical soil mechanics, Wiley, New York, NY, USA.Google Scholar
  28. Yao, J. T. and Cheng, K. K. (2017). “Discussion of sensitivity factors and dominating variable for design value method.” KSCE Journal of Civil Engineering, KSCE, Vol. 21, No. 1, pp. 37–44, DOI: 10.1007/s12205-016-0232-z.CrossRefGoogle Scholar
  29. Yen, J. and Shou, K. (2015). “Numerical simulation for the estimation the jacking force of pipe jacking.” Tunnelling and Underground Space Technology, Vol. 49, No, 6, pp. 218–229, DOI: 10.1016/j.tust.2015.04.018.CrossRefGoogle Scholar

Copyright information

© Korean Society of Civil Engineers 2019

Authors and Affiliations

  • Pengjiao Jia
    • 1
  • Baofeng Jiang
    • 1
    • 2
  • Wen Zhao
    • 1
    Email author
  • Yongping Guan
    • 3
  • Jianyong Han
    • 1
  • Cheng Cheng
    • 1
  1. 1.School of Resource & Civil EngineeringNortheastern University (NEU)ShenyangChina
  2. 2.Shenyang Metro Co., Ltd.ShenyangChina
  3. 3.Urban Rail Transit System Design and Research Sub-InstituteChina Railway Design CorporationTianjingChina

Personalised recommendations