Advertisement

KSCE Journal of Civil Engineering

, Volume 23, Issue 5, pp 2204–2214 | Cite as

New Adjustment Method for the Width of Monorail Beams on Curve

  • Eryu ZhuEmail author
  • Hongliang Wang
  • Lei Wang
  • Yujie Li
  • Li Zhu
Structural Engineering
  • 17 Downloads

Abstract

A new method to improve the passing performance of monorail train driving on a curve by adjusting the width of monorail beams is proposed. Equations for deformation of steering wheel and stabilizing wheel with respect to the contact relationship between monorail beams and trains are derived by geometric analysis. Then two kinds of adjustment schemes are proposed, equal width adjustment method and unequal width adjustment method. A curved guide way of radius 100 m is taken for the example to verify the validity of the improved method by comparing the tire deformation of monorail train driving on the beams before and after the adjustment of width. The results show that the improved adjustment method for the width of monorail beam is efficient to reduce tire deformation when the monorail train travels on a curve. For the guide way of radius 100 m, width of the beams should be reduced by 7 mm when the equal width adjustment method is adopted. When the unequal width adjustment method is adopted, the width of monorail beams at the position of steering wheel carriageway and stabilizing wheel carriageway should be reduced by 10 mm and 5 mm, respectively.

Keywords

monorail guide way width adjustment passing performance tire worn 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Cho, J. R., Shin, S. W., and Yoo, W. S. (2005). “Crown shape optimization for enhancing tire wear performance by ANN.” Computers & Structures, Vol. 83, Nos. 12–13, pp. 920–933, DOI: 10.1016/j.compstruc. 20004.11.011.CrossRefGoogle Scholar
  2. Du, Z. X., Wen, X. X., and Shen, Z. (2014). “The impact analysis of tire parameter for tire wear when monorail vehicle curve driving.” Applied Mechanics and Materials, Vol. 470, pp. 529–533, DOI: 10.4028/www.scientific.net/AMM.470.529.CrossRefGoogle Scholar
  3. Farroni, F., Sakhnevych, A., and Timpone, F. (2017). “Physical modeling of tire wear for the analysis of the influence of thermal and frictional effects on vehicle performance.” Journal of Materials and Applications, Vol. 231, Nos. 1–2, pp. 151–161, DOI: 10.1177/1464420716666107.Google Scholar
  4. Heinrich, G., Klüppel, M., and Vilgis, T. A. (2000). “Evaluation of selfaffine surfaces and their implication for frictional dynamics as illustrated with a rouse material.” Comput. Theor. Polym. S., Vol. 10, Nos. 1–2, pp. 53–61.CrossRefGoogle Scholar
  5. Huang, H., Chiu, Y., Wang, C., and Jin, X. (2015). “Three-dimensional global pattern prediction for tyre tread wear.” Journal of Automobile Engineering, Vol. 229, No. 2, pp. 197–213, DOI: 10.1177/ 0954407014537640.CrossRefGoogle Scholar
  6. Le Gal, A., Guy, L., Orange, G., Bomal, Y., and Klüppel, M. (2008). “Modeling of sliding friction for carbon black and silica filled elastomers on road tracks.” Wear, Vol. 264, Nos. 7–8, pp. 606–615, DOI: 10.1016/j.wear.2007.05.002.CrossRefGoogle Scholar
  7. Lee, C. H., Kawatani, M., Kim, C. W., Nishimura, N., and Kobayashi, Y. (2006). “Dynamic response of a monorail steel bridge under a moving train.” Journal of Sound and Vibration, Vol. 294, No. 3, pp. 562–579, DOI: 10.1016/j.jsv.2005.12.028.CrossRefGoogle Scholar
  8. Lee, C.H., Kim, C.W., Kawatani, M., Nishimura, N., and Kamizono, T. (2005). “Dynamic response analysis of monorail bridges under moving trains and riding comfort of trains.” Engineering Structures, Vol. 27, No. 14, pp. 1999–2013, DOI: 10.1016/j.engstruct.2005.06.014.CrossRefGoogle Scholar
  9. Li, Y., Zuo, S., Lei, L., Yang, X., and Wu, X. (2012). “Analysis of impact factors of tire wear.” J. Vib. Control, Vol. 18, No. 6, pp. 833–840, DOI: 10.1177/ 1077546311411756CrossRefGoogle Scholar
  10. Lupker, H., Cheli, F., Braghin, F., Gelosa, E., and Keckman, A. (2004). “Numerical prediction of car tire wear.” Tire Science and Technology, Vol. 32, No. 3, pp. 164–186.CrossRefGoogle Scholar
  11. Ma, B., Xu, H.G., Chen, Y., and Lin, M.Y. (2017). “Evaluating the tire wear quantity and differences based on vehicle and road coupling method.” Advances in Mechanical Engineering, Vol. 9, No. 5, pp. 1–13, DOI: 10.1177/1687814017700063.CrossRefGoogle Scholar
  12. Persson, B. N. J. (2006). “Rubber friction: Role of the flash temperature.” Journal of Physics: Condensed Matter, Vol. 18, No. 32, pp. 7789–7823.Google Scholar
  13. Stefan, W. and Frank, P. (2014). “Tire road contact mechanics.” VDI Ber., Vol. 2014, pp. 243–244.Google Scholar
  14. Wang, C., Huang, H., Chen, X., and Liu, J. (2017). “The influence of the contact features on the tyre wear in steady-state conditions.” Journal of Automobile Engineering, Vol. 231, No. 10, pp. 1326–1339, DOI: 10.1177/0954407016671462.CrossRefGoogle Scholar
  15. Wu, Y. P., Zhou, Y., Li, J. L., Zhou, H. D., Chen, J. M., and Zhao, H. C. (2016). “A comparative study on wear behavior and mechanism of styrene butadiene rubber under dry and wet conditions.” Wear, Vol. 356, No. 2016, pp. 1–8, DOI: 10.1016/j.wear.2016.01.025.CrossRefGoogle Scholar
  16. Yang, J., Wang, G. L., Wan, Z. J., Liang, C., and Zhou, H. C. (2016). “Non-natural equilibrium contour design for radial tire and its influence on tire performance.” International Journal of Automotive Technology, Vol. 17, No. 4, pp. 639–649, DOI: 10.1007/s12239-016-0063-4.CrossRefGoogle Scholar
  17. Zheng, D. (2002). “Prediction of tire tread wear with FEM steady state rolling contact simulation.” Tire Science and Technology, Vol. 31, No. 3, pp. 189–202.CrossRefGoogle Scholar

Copyright information

© Korean Society of Civil Engineers 2019

Authors and Affiliations

  • Eryu Zhu
    • 1
    Email author
  • Hongliang Wang
    • 1
  • Lei Wang
    • 1
  • Yujie Li
    • 2
  • Li Zhu
    • 2
  1. 1.School of Civil EngineeringBeijing Jiaotong UniversityBeijingChina
  2. 2.Beijing SubwayBeijingChina

Personalised recommendations