New high-throughput screening tool for the evaluation of pigmented UV-A curable coatings—A case study using low energy lamps
- 104 Downloads
Pigmented UV radiation-curable coatings have been a challenge to the coatings formulator for a long time. A critical match of pigment and photoinitiator package is crucial, for good cure. Another issue facing the coatings chemist is the popularity of low energy lamps, which offer ease of handling, reduced safety concerns, and a low price tag. Obviously, the combination of curing pigmented coatings and using low energy lamps poses a special challenge.
To improve the pigmented coating development cycle, a rapid workflow was needed to screen formulations for cure under low energy UV-A radiation. For these types of applications, a high-throughput, screening assay for discovering desirable photoinitiator packages was developed. Fluorescent dye-doped coatings cured under UV-A radiation were extracted with solvent. The relative degree-of-cure, of the film was determined to be inversely related to a combination of the absorbance and fluorescence of the extractant. When this assay is used in conjunction with automated liquid handling and a spectrophotometer with an x-y scanning stage, the coatings formulator can analyze a large variable set in a short period of time. A primary screening of photoinitiators using this workflow suggests Lucirin® TPO-L, Darocur® 4265, and Irgacure® 2100 as optimum choices.
KeywordsPhotoinitiators fluorescence spectroscopy solvent resistance crosslinking cure UV EB radiation cure polyurethanes isocyanate
Unable to display preview. Download preview PDF.
- (1).Lowe, C., “UV&EB Pigmented Coatings,” in Chemistry and Technology of UV&EB Formulation for Coatings, Inks & Paints, Wiley & Sons, London, Vol. IV, pp. 24–43 and the references therein, 1997.Google Scholar
- (2).Dvorchak, M.J., “UV Curing of Pigmented High-Build Wood Coatings Based on Non-Air-Inhibited Unsaturated Polyesters,” J. Coat. Technol., 67, No. 842, 49 (1995).Google Scholar
- (3).Dvorchak, M.J., Strazisar, S., and Bach, H., “Automotive UV-A Curable Refinish Primers and Clear Coats—Fact or Fiction?,” Radtech Report (2004).Google Scholar
- (4).Wicks, D. and Bach, H., “High Throughput Screening for Formulations,” Coatings World, 10, 38–47 (2002).Google Scholar
- (5).Wicks, D. and Bach, H., “High Throughput Screening for Formulations—Part II,” Coatings World, 11, 28–33 (2002).Google Scholar
- (6).Webster, D., “High Throughput Workflow for the Development of Coatings,” JCT CoatingsTech, 1, No. 6, 34 (2004).Google Scholar
- (7).Utilized Genesis RSP liquid handling robot, from Tecan U.S., Inc., www.tecan.com.Google Scholar
- (8).UV-A400 model from H&S Autoshot Manufacturing Co. Ltd., 49 Mountainview Road North, Georgetown, Ontario L7G 4J7, Canada.Google Scholar
- (9).Bach, H. and Guertler, C., PCT Int. Appl. WO 2002042745, 2002.Google Scholar
- (10).Utilized SpectraFluor reader, from Tecan U.S., Inc., www.tecan.com.Google Scholar
- (11).Key Product Selection Guide, Ciba, 2003.Google Scholar
- (12).Standardized values measure how many standard units away from the mean the yi response is. These values are “unitless.”Google Scholar
- (13).At the p/b levels used in this experiment, Irgacure® 819 can be used at low concentrations without significant yellowing.Google Scholar
- (14).Mehnert, R., Pincus, A., Janorsky, I., Stowe, R., and Berejka, A., UV & EB Curing Technology and Equipment, Vol. 1, 49, 1998.Google Scholar
- (15).As measured in the Bayer Material Science labs.Google Scholar