Advertisement

Crust Formation and Microstructural Changes of Gingko Biloba Seeds During Drying

  • Jun-Wen Bai
  • Jian-Rong Cai
  • Xiao-Yu TianEmail author
Original Paper
  • 53 Downloads

Abstract

Gingko biloba (GB) seeds were dried by hot air under drying temperature of 60, 70, 80, and 90 °C. The crust formation of GB seeds during drying process was monitored by stereomicroscopy. A line dividing the illuminated and dark part was observed from the stereoscopic image, of which the dark part was the crust layer. The degree of crust under drying process was represented by crust ratio rather than the absolute thickness of the crust layer due to the shrinkage phenomenon during drying. The crust ratio increased with the drying time in all cases. It was also found that drying temperatures had significant effects on the crust formation. Zero-order model was successfully applied to describe the crust ratio changes. Activation energy for crust formation was calculated for 53.91 kJ/mol by the Arrhenius equation. The microstructure observed by scanning electron microscope (SEM) indicates that the crust layer had an obvious dense structure compared with the non-crust part, which well proved the reasonableness of using stereomicroscope to evaluate the crust degree. The combination of the two microscopy techniques (stereomicroscopy and SEM) provides a feasible method for observation and evaluation of the crust formation in the drying process.

Keywords

Gingko biloba seeds Crust formation Drying Microstructure Surface hardening 

Notes

Funding Information

This research is supported by the National Natural Science Foundation of China (31601578), the Natural Science Foundation of Jiangsu Province (BK20160504), and Jiangsu University Advanced Talent Research Start-up Fund (15JDG060).

References

  1. Achanta, S., & Okos, M. (1996). Predicting the quality of dehydrated foods and biopolymers — research needs and opportunities. Drying Technology, 14(6), 1329–1368.CrossRefGoogle Scholar
  2. AOAC (1990). Official methods of analysis. Washington, DC: Association of Official Analytical Chemists.Google Scholar
  3. Bai, Y., Rahman, M. S., Perera, C. O., Smith, B., & Melton, L. D. (2002). Structural changes in apple rings during convection air-drying with controlled temperature and humidity. Journal of Agricultural and Food Chemistry, 50(11), 3179–3185.CrossRefGoogle Scholar
  4. Bai, J., Gao, Z., Xiao, H., Wang, X., & Zhang, Q. (2013). Polyphenol oxidase inactivation and vitamin C degradation kinetics of Fuji apple quarters by high humidity air impingement blanching. International Journal of Food Science and Technology, 48(6), 1135–1141.CrossRefGoogle Scholar
  5. Bai, J., Xiao, H., Ma, H., & Zhou, C. (2018). Artificial neural network modeling of drying kinetics and color changes of ginkgo biloba seeds during microwave drying process. Journal of Food Quality, 2018, 1–8.  https://doi.org/10.1155/2018/3278595.Google Scholar
  6. Blasco, R., Esteve, M. J., Frı́gola, A., & Rodrigo, M. (2004). Ascorbic acid degradation kinetics in mushrooms in a high-temperature short-time process controlled by a thermoresistometer. LWT - Food Science and Technology, 37(2), 171–175.CrossRefGoogle Scholar
  7. Cai, J., Cai, C., Man, J., Xu, B., & Wei, C. (2014). Physicochemical properties of ginkgo kernal starch. International Journal of Food Properties, 18(2), 380–391.CrossRefGoogle Scholar
  8. Cao, X., Zhang, M., Fang, Z., Mujumdar, A. S., Jiang, H., Qian, H., & Ai, H. (2016). Drying kinetics and product quality of green soybean under different microwave drying methods. Drying Technology, 35(2), 240–248.CrossRefGoogle Scholar
  9. Chungcharoen, T., Prachayawarakorn, S., Tungtrakul, P., & Soponronnarit, S. (2015). Effects of germination time and drying temperature on drying characteristics and quality of germinated paddy. Food and Bioproducts Processing, 94, 707–716.CrossRefGoogle Scholar
  10. Corzo, O., Bracho, N., Pereira, A., & Vásquez, A. (2008). Weibull distribution for modeling air drying of coroba slices. LWT - Food Science and Technology, 41(10), 2023–2028.CrossRefGoogle Scholar
  11. Demiray, E., & Tulek, Y. (2015). Color degradation kinetics of carrot (Daucus carota L.) slices during hot air drying. Journal of Food Processing and Preservation, 39(6), 800–805.CrossRefGoogle Scholar
  12. Demirel, D., & Turhan, M. (2003). Air-drying behavior of Dwarf Cavendish and Gros Michel banana slices. Journal of Food Engineering, 59(1), 1–11.CrossRefGoogle Scholar
  13. Deng, L., Yang, X., Mujumdar, A. S., Zhao, J., Wang, D., Zhang, Q., Wang, J., Gao, Z., & Xiao, H. (2017). Red pepper (Capsicum annuum L.) drying: effects of different drying methods on drying kinetics, physicochemical properties, antioxidant capacity, and microstructure. Drying Technology, 36(8), 893–907.CrossRefGoogle Scholar
  14. Falade, K. O., & Solademi, O. J. (2010). Modelling of air drying of fresh and blanched sweet potato slices. International Journal of Food Science & Technology, 45(2), 278–288.CrossRefGoogle Scholar
  15. Fang, S., Wang, Z., Hu, X., & Datta, A. K. (2009). Hot-air drying of whole fruit Chinese jujube (Zizyphus jujuba Miller): physicochemical properties of dried products. International Journal of Food Science and Technology, 44(7), 1415–1421.CrossRefGoogle Scholar
  16. Gordon, M., & Taylor, J. S. (1952). Ideal copolymers and the second - order transitions of synthetic rubbers. i. non - crystalline copolymers[J]. Journal of Chemical Technology & Biotechnology, 2(9), 493–500.Google Scholar
  17. Gou, P., Comaposada, J., Arnau, J., & Pakowski, Z. (2006). On-line determination of water activity at the lean surface of meat products during drying and its relationship with the crusting development. Drying Technology, 23(8), 1641–1652.CrossRefGoogle Scholar
  18. Gulati, T., & Datta, A. K. (2015). Mechanistic understanding of case-hardening and texture development during drying of food materials. Journal of Food Engineering, 166, 119–138.CrossRefGoogle Scholar
  19. Ju, H., Zhang, Q., Mujumdar, A. S., Fang, X., Xiao, H., & Gao, Z. (2016). Hot-air drying kinetics of yam slices under step change in relative humidity. International Journal of Food Engineering, 12(8), 783–792.CrossRefGoogle Scholar
  20. Jumah, R., Banat, F., Al-Asheh, S., & Hammad, S. (2004). Drying kinetics of tomato paste. International Journal of Food Properties, 7(2), 253–259.CrossRefGoogle Scholar
  21. Kocabiyik, H., Yilmaz, N., Tuncel, N. B., Sumer, S. K., & Buyukcan, M. B. (2015). Drying, energy, and some physical and nutritional quality properties of tomatoes dried with short-infrared radiation. Food and Bioprocess Technology, 8(3), 516–525.CrossRefGoogle Scholar
  22. Kowalski, S. J., & Mielniczuk, B. (2006). Drying-induced stresses in macaroni dough. Drying Technology, 24(9), 1093–1099.CrossRefGoogle Scholar
  23. Kumar, H. P., Nagaraju, P. Y., Radhakrshna, K., & Bawa, A. (2004). Effect of dehydration techniques on the quality of onion slices. Journal of Food Science and Technology-Mysore, 41(4), 397–400.Google Scholar
  24. Kurozawa, L. E., Hubinger, M. D., & Park, K. J. (2012). Glass transition phenomenon on shrinkage of papaya during convective drying. Journal of Food Engineering, 108(1), 43–50.CrossRefGoogle Scholar
  25. Li, H., Xie, L., Ma, Y., Zhang, M., Zhao, Y., & Zhao, X. (2019). Effects of drying methods on drying characteristics, physicochemical properties and antioxidant capacity of okra. LWT, 101, 630–638.CrossRefGoogle Scholar
  26. Llave, Y., Takemori, K., Fukuoka, M., Takemori, T., Tomita, H., & Sakai, N. (2016). Mathematical modeling of shrinkage deformation in eggplant undergoing simultaneous heat and mass transfer during convection-oven roasting. Journal of Food Engineering, 178, 124–136.CrossRefGoogle Scholar
  27. Marabi, A., Livings, S., Jacobson, M., & Saguy, I. S. (2003). Normalized Weibull distribution for modeling rehydration of food particulates. European Food Research and Technology, 217(4), 311–318.CrossRefGoogle Scholar
  28. Mayor, L., Silva, M. A., & Sereno, A. M. (2005). Microstructural changes during drying of apple slices. Drying Technology, 23(9–11), 2261–2276.CrossRefGoogle Scholar
  29. Miao, M., Jiang, H., Jiang, B., Cui, S. W., Jin, Z., & Zhang, T. (2012). Structure and functional properties of starches from Chinese ginkgo (Ginkgo biloba L.) nuts. Food Research International, 49(1), 303–310.CrossRefGoogle Scholar
  30. Moon, J. H., Kim, M. J., Chung, D. H., Pan, C., & Yoon, W. B. (2014). Drying characteristics of sea cucumber (Stichopus japonicas Selenka) using far infrared radiation drying and hot air drying. Journal of Food Processing and Preservation, 38(4), 1534–1546.CrossRefGoogle Scholar
  31. Moon, J. H., Pan, C. H., & Yoon, W. B. (2015). Drying characteristics and thermal degradation kinetics of hardness, anthocyanin content and colour in purple- and red-fleshed potato (Solanum tuberosum L.) during hot air drying. International Journal of Food Science & Technology, 50(5), 1255–1267.CrossRefGoogle Scholar
  32. Niamnuy, C., Devahastin, S., & Soponronnarit, S. (2014). Some recent advances in microstructural modification and monitoring of foods during drying: a review. Journal of Food Engineering, 123, 148–156.CrossRefGoogle Scholar
  33. Olatunde, G. A., & Atungulu, G. G. (2018). Milling behavior and microstructure of rice dried using microwave set at 915 MHz frequency. Journal of Cereal Science, 80, 167–173.CrossRefGoogle Scholar
  34. Orikasa, T., Tagawa, A., Soma, S., Iimoto, M., & Ogawa, Y. (2005). Hot air drying characteristics of fruits and vegetables and surface hardening of samples during drying. Journal of the Japanese Society of Agricultural Machinery, 67(6), 62–70.Google Scholar
  35. Orikasa, T., Wu, L., Shiina, T., & Tagawa, A. (2008). Drying characteristics of kiwifruit during hot air drying. Journal of Food Engineering, 85(2), 303–308.Google Scholar
  36. Ortiz-García-Carrasco, B., Yañez-Mota, E., Pacheco-Aguirre, F. M., Ruiz-Espinosa, H., García-Alvarado, M. A., Cortés-Zavaleta, O., & Ruiz-López, I. I. (2015). Drying of shrinkable food products: appraisal of deformation behavior and moisture diffusivity estimation under isotropic shrinkage. Journal of Food Engineering, 144, 138–147.CrossRefGoogle Scholar
  37. Pimpaporn, P., Devahastin, S., & Chiewchan, N. (2007). Effects of combined pretreatments on drying kinetics and quality of potato chips undergoing low-pressure superheated steam drying. Journal of Food Engineering, 81(2), 318–329.CrossRefGoogle Scholar
  38. Ramos, I. N., Brandão, T. R. S., & Silva, C. L. M. (2003). Structural changes during air drying of fruits and vegetables. Food Science and Technology International, 9(3), 201–206.CrossRefGoogle Scholar
  39. Ramos, I. N., Silva, C. L. M., Sereno, A. M., & Aguilera, J. M. (2004). Quantification of microstructural changes during first stage air drying of grape tissue. Journal of Food Engineering, 62(2), 159–164.CrossRefGoogle Scholar
  40. Ramos, I. N., Brandao, T., & Silva, C. (2005). Integrated approach on solar drying, pilot convective drying and microstructural changes. Journal of Food Engineering, 67(1–2), 195–203.CrossRefGoogle Scholar
  41. Rodríguez, Ó., Llabrés, P. J., Simal, S., Femenia, A., & Rosselló, C. (2015). Intensification of predrying treatments by means of ultrasonic assistance: effects on water mobility, PPO activity, microstructure, and drying kinetics of apple. Food and Bioprocess Technology, 8(3), 503–515.CrossRefGoogle Scholar
  42. Sappati, P. K., Nayak, B., & Walsum, G. P. V. (2017). Effect of glass transition on the shrinkage of sugar kelp (Saccharina latissima) during hot air convective drying. Journal of Food Engineering, 210, 50–61.CrossRefGoogle Scholar
  43. Speckhahn, A., Srzednicki, G., & Desai, D. K. (2010). Drying of beef in superheated steam. Drying Technology, 28(9), 1072–1082.CrossRefGoogle Scholar
  44. Tsuruta, T., Tanigawa, H., & Sashi, H. (2015). Study on shrinkage deformation of food in microwave–vacuum drying. Drying Technology, 33(15–16), 1830–1836.Google Scholar
  45. Udomkun, P., Nagle, M., Argyropoulos, D., Mahayothee, B., & Müller, J. (2016). Multi-sensor approach to improve optical monitoring of papaya shrinkage during drying. Journal of Food Engineering, 189, 82–89.CrossRefGoogle Scholar
  46. Wang, J., Yang, X., Mujumdar, A. S., Wang, D., Zhao, J., Fang, X., Zhang, Q., Xie, L., Gao, Z., & Xiao, H. (2017). Effects of various blanching methods on weight loss, enzymes inactivation, phytochemical contents, antioxidant capacity, ultrastructure and drying kinetics of red bell pepper (Capsicum annuum L.). LWT, 77, 337–347.CrossRefGoogle Scholar
  47. Wang, J., Law, C., Nema, P. K., Zhao, J., Liu, Z., Deng, L., Gao, Z., & Xiao, H. (2018). Pulsed vacuum drying enhances drying kinetics and quality of lemon slices. Journal of Food Engineering, 224, 129–138.CrossRefGoogle Scholar
  48. Xiao, H. W., Yao, X. D., Lin, H., Yang, W. X., Meng, J. S., & Gao, Z. J. (2012). Effect of SSB (superheated steam blanching) time and drying temperature on hot air impingement drying kinetics and quality attributes of yam slices. Journal of Food Process Engineering, 35(3), 370–390.CrossRefGoogle Scholar
  49. Xiao, H., Bai, J., Xie, L., Sun, D., & Gao, Z. (2015). Thin-layer air impingement drying enhances drying rate of American ginseng (Panax quinquefolium L.) slices with quality attributes considered. Food and Bioproducts Processing, 94, 581–591.CrossRefGoogle Scholar
  50. Xie, L., Mujumdar, A. S., Zhang, Q., Wang, J., Liu, S., Deng, L., Wang, D., Xiao, H., Liu, Y., & Gao, Z. (2017). Pulsed vacuum drying of wolfberry: Effects of infrared radiation heating and electronic panel contact heating methods on drying kinetics, color profile, and volatile compounds. Drying Technology, 35(11), 1312–1326.CrossRefGoogle Scholar
  51. Zhang, C. H., Huang, L. X., Wang, C. P., & Mujumdar, A. S. (2010). Experimental and numerical investigation of spray-drying parameters on the dried powder properties of Ginkgo biloba seeds. Drying Technology, 28(3), 380–388.CrossRefGoogle Scholar
  52. Zhang, Z., Liu, Z., Liu, C., Li, D., Jiang, N., & Liu, C. (2016). Effects of ultrasound pretreatment on drying kinetics and quality parameters of button mushroom slices. Drying Technology, 34(15), 1791–1800.CrossRefGoogle Scholar
  53. Zheng, W., Li, X., Zhang, L., Zhang, Y., Lu, X., & Tian, J. (2015). Improved metabolites of pharmaceutical ingredient grade ginkgo biloba and the correlated proteomics analysis. Proteomics, 15(11), 1868–1883.CrossRefGoogle Scholar
  54. Zhou, X., Xu, R., Zhang, B., Pei, S., Liu, Q., Ramaswamy, H. S., & Wang, S. (2018). Radio frequency-vacuum drying of kiwifruits: kinetics, uniformity, and product quality. Food and Bioprocess Technology, 11(11), 2094–2109.CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.School of Food and Biological EngineeringJiangsu UniversityZhenjiangChina

Personalised recommendations