Advertisement

JOM

, Volume 71, Issue 9, pp 3031–3040 | Cite as

Interfacial Reactions Between Lead-Free Solders and Ni-Pd-Co Alloys

  • Yee-Wen Yen
  • Hsien-Ming HsiaoEmail author
  • Kuo-Jung Chen
  • Yi-Show Lin
  • Mei-Ting Lai
Advanced Electronic Interconnection
  • 15 Downloads

Abstract

The liquid/solid interfacial reactions of Sn, Sn-(3.0 wt.% to 0.5 wt.%)Cu (SAC), and Sn-9.0 wt.%Zn (SZ) solders with Ni-xPd-yCo substrates at 240°C, 270°C, and 300°C for 0.5 h to 5 h have been investigated. The Ni-xPd-yCo alloys were prepared with x = 0.5 wt.% and 1.5 wt.% and y = 0.5 wt.%, 1.5 wt.%, and 3.0 wt.%. The intermetallic compound (IMC) Ni3Sn4 formed in the Sn/Ni-xPd-yCo reaction couples at 240°C, 270°C, and 300°C. Although (Cu,Ni)6Sn5 and (Ni,Cu)3Sn4 phases appeared at the interface of the SAC/Ni-xPd-yCo couples after 0.5 h to 2 h at 240°C, only (Ni,Cu)3Sn4 phase formed after 5 h at 240°C or 0.5 h to 5 h at 270°C or 300°C in the SAC/Ni-xPd-yCo systems. The SZ/Ni-xPd-yCo interfacial reactions at three different temperatures formed the Ni5Zn21 phase, but when the reaction time was extended to 5 h, Ni5Zn21, Sn, and δ phases were also observed. The thickness of the IMCs was measured and used to calculate the reaction rate constant and activation energy. The interfacial reactions between the lead-free solders (Sn, SAC, and SZ) and Ni-xPd-yCo substrates were determined to be diffusion controlled.

Notes

Acknowledgements

The authors acknowledge financial support from the Ministry of Science and Technology, Taiwan, R.O.C. (Grant No. MOST 104-2628-E-011-001-MY3) and the Applied Research Center for Thin-Film Metallic Glass from The Featured Areas Research Center Program within the framework of the Higher Education Sprout Project by the Ministry of Education (MOE) in Taiwan. The authors are also grateful for help from Mr. S. C. Laiw, who works at National Taiwan University of Science and Technology, for SEM–EDS operation and Mr. C. Y. Kao, who works at National Taiwan University, and Mrs. Tsai, who works at National Tsing Hua University, for carrying out the EPMA analysis.

References

  1. 1.
    Y.W. Wang, Y.W. Lin, C.T. Tu, and C.R. Kao, J. Alloys Compd. 478, 121 (2009).CrossRefGoogle Scholar
  2. 2.
    H. Nishikawa, A. Komatsu, and T. Takemoto, Mater. Trans. 49, 1518 (2008).CrossRefGoogle Scholar
  3. 3.
    D.H. Kim, M.G. Cho, S.-K. Seo, and H.M. Lee, J. Electron. Mater. 38, 39 (2009).CrossRefGoogle Scholar
  4. 4.
    G. Ghosh, Acta Mater. 48, 3719 (2000).CrossRefGoogle Scholar
  5. 5.
    H. Nishikawa, A. Komatsu, and T. Takemoto, J. Electron. Mater. 36, 1137 (2007).CrossRefGoogle Scholar
  6. 6.
    C.-F. Tseng, T.-K. Lee, G. Ramakrishna, K.-C. Liu, and J.-G. Duh, Mater. Lett. 65, 3216 (2011).CrossRefGoogle Scholar
  7. 7.
    Y.-H. Chao, S.-W. Chen, C.-H. Chang, and C.-C. Chen, Metall. Mater. Trans. A 39, 477 (2008).CrossRefGoogle Scholar
  8. 8.
    Y.-T. Chen, Y.-T. Chan, and C.-C. Chen, J. Alloys Compd. 507, 419 (2010).CrossRefGoogle Scholar
  9. 9.
    H.-F. Lin, Y.-C. Chang, and C.-C. Chen, J. Electron. Mater. 43, 3333 (2014).CrossRefGoogle Scholar
  10. 10.
    P. Nash and A. Nash, Bull. Alloy Phase Diagr. 6, 350 (1985).MathSciNetCrossRefGoogle Scholar
  11. 11.
    S.-W. Chen, C.-M. Chen, and W.-C. Liu, J. Electron. Mater. 27, 1193 (1998).CrossRefGoogle Scholar
  12. 12.
    C.M. Chen and S.W. Chen, Acta Mater. 50, 2461 (2002).CrossRefGoogle Scholar
  13. 13.
    Y.-S. Li, Master’s Degree, National Taiwan University of Science and Technology (2014).Google Scholar
  14. 14.
    C.-Y. Ho and J.-G. Duh, Mater. Lett. 92, 278 (2013).CrossRefGoogle Scholar
  15. 15.
    C.-H. Lin, S.-W. Chen, and C.-H. Wang, J. Electron. Mater. 31, 907 (2002).CrossRefGoogle Scholar
  16. 16.
    C.E. Ho, R.Y. Tsai, Y.L. Lin, and C.R. Kao, J. Electron. Mater. 31, 584 (2002).CrossRefGoogle Scholar
  17. 17.
    C.E. Ho, Y.W. Lin, S.C. Yang, C.R. Kao, and D.S. Jiang, J. Electron. Mater. 35, 1017 (2006).CrossRefGoogle Scholar
  18. 18.
    S.-W. Chen, C.-M. Hsu, C.-Y. Chou, and C.-W. Hsu, Prog. Nat. Sci. Mater. Int. 21, 386 (2011).CrossRefGoogle Scholar
  19. 19.
    B.F. Dyson, T.R. Anthony, and D. Turnbull, J. Appl. Phys. 38, 3408 (1967).CrossRefGoogle Scholar
  20. 20.
    C.-H. Wang, H.-H. Chen, and P.-Y. Li, Mater. Chem. Phys. 136, 325 (2012).CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  • Yee-Wen Yen
    • 1
    • 2
  • Hsien-Ming Hsiao
    • 3
    Email author
  • Kuo-Jung Chen
    • 1
  • Yi-Show Lin
    • 1
  • Mei-Ting Lai
    • 1
  1. 1.Department of Materials Science and EngineeringNational Taiwan University of Science and TechnologyTaipeiTaiwan ROC
  2. 2.Applied Research Center for Thin-Film Metallic GlassNational Taiwan University of Science and TechnologyTaipeiTaiwan ROC
  3. 3.Institute of Nuclear Energy ResearchTaoyuanTaiwan ROC

Personalised recommendations