Nonlinearity of Material Loss Versus the Wearing Force
- 2 Downloads
In contrast to the description provided by Archard’s equation, material loss under a wearing force is more or less nonlinear. Excluding the wear regime transition and other possible factors such as oxidation, this nonlinear relationship may result from variations in the mechanical behavior of materials such as strain hardening. Although this is a classic topic, relevant issues have still not been fully clarified or quantified. Better understanding of the nonlinearity would help achieve good control of the wear of materials, especially surface wear encountered in nano/microsystems, which are sensitive to surface damage or deterioration. In this study, we investigated the nonlinearity of material loss versus wearing force, without involving the wear regime transition, for three alloys, Al5182 (fcc), AZ31B alloy (hcp), and steel (bcc). An attempt is made to study this phenomenon in depth and extract additional information on the material behavior from the nonlinearity.
The authors are grateful to the Natural Science and Engineering Research Council of Canada, the National Major Science and Technology Specialized High-end Foreign Talents Introduction Project (China), Camber Technology Corporation, Suncor Energy, GIW Industries Inc., Shell Canada Ltd., Magna International Inc., and Volant Products Inc. for financial support.
- 2.M.F. Ashby and D.R. Jones. Fuel Energy Abstr. 4, 284 (1995).Google Scholar
- 3.F.A.A. Crane, J.A. Charles, and J. Furness, Selection and Use of Engineering Materials, 3rd ed. (Oxford: Butterworth-Heinemann, 1997).Google Scholar
- 13.D.Y. Li, Abrasive wear. ASM Handbook, Volume 18: Friction, Lubrication, and Wear Technology, ed. G.E. Totten (Materials Park: ASM International, 2017).Google Scholar
- 14.I. Hutchings and P. Shipway, Tribology: Friction and Wear of Engineering Materials, 2nd ed. (Oxford: Butterworth-Heinemann, 2017).Google Scholar
- 16.G. Pintaude, Introduction of the ratio of the hardness to the reduced elastic modulus for abrasion.Tribology—Fundamentals and Advancements, ed. J. Gegner (Singapore: Intech, 2013), Google Scholar
- 17.A.D. Sarkar, Friction and Wear (New York: Academic Press, 1980).Google Scholar
- 33.M.A. Chowdhury, M.K. Khalil, D.M. Nuruzzaman, and M.L. Rahaman, Int. J. Mech. Mech. Eng. 11, 53 (2011).Google Scholar
- 36.R. Ernest, Friction and Wear of Materials (New York: Wiley, 1995).Google Scholar
- 38.H.C. Thomas, Mechanical Behavior of Materials (Singapore: McGraw-Hill Int., 2000), pp. 324–325.Google Scholar