JOM

, Volume 70, Issue 5, pp 632–637 | Cite as

Producing High-Quality Titanium Alloy by a Cost-Effective Route Combining Fast Heating and Hot Processing

  • Fei Yang
  • Stella Raynova
  • Ajit Singh
  • Qinyang Zhao
  • Carlos Romero
  • Leandro Bolzoni
Powder Metallurgy of Non-Ferrous Metals
  • 71 Downloads

Abstract

Powder metallurgy is a very attractive method for producing titanium alloys, which can be near-net-shape formed and have freedom in composition selection. However, applications are still limited due to product affordability. In this paper, we will discuss a possible cost-effective route, combining fast heating and hot processing, to produce titanium alloys with similar or even better mechanical properties than that of ingot metallurgy titanium alloys. Two titanium alloys, Ti-5Al-5V-5Mo-3Cr (Ti-5553) and Ti-5Fe, were successfully produced from HDH titanium powder and other master alloy powders using the proposed processing route. The effect of the processing route on microstructural variation and mechanical properties have been discussed.

Notes

Acknowledgement

The funding from Ministry of Business, Innovation and Employment (MBIE), New Zealand (Contract No. UOWX1402) to support this work is gratefully acknowledged.

References

  1. 1.
    T. Fujita, A. Ogawa, C. Ouchi, and H. Tajima, Mater. Sci. Eng. A 213, 148 (1996).CrossRefGoogle Scholar
  2. 2.
    M. Hagiwara and S. Emura, Mater. Sci. Eng. A 352, 85 (2003).CrossRefGoogle Scholar
  3. 3.
    R.R. Boyer and R.D. Briggs, J. Mater. Eng. Perform. 14, 681 (2005).CrossRefGoogle Scholar
  4. 4.
    S.L. Semiatin, V. Seetharaman, and I. Weiss, Mater. Sci. Eng. A 263, 257 (1999).CrossRefGoogle Scholar
  5. 5.
    S.M. EL-Soudani, K. O. Yu, E.M. Crist, F.S. Sun, M.B. Campbell, T.S. Esposito, J.J. Phillips, V. Moxson, and V.A. DUz, Metall. Mater. Trans, A 44, 899 (2012).Google Scholar
  6. 6.
    F. Yang, D.L. Zhang, B. Gabbitas, H.Y. Lu, and C.F. Wang, Mater. Sci. Eng. A 598, 360–367 (2014).CrossRefGoogle Scholar
  7. 7.
    F. Yang and B. Gabbitas, J. Alloy. Compd. 695, 1455 (2017).CrossRefGoogle Scholar
  8. 8.
    A.D. Manshadi and R.J. Dippenaar, Mater. Sci. Eng. A 528, 1833 (2011).CrossRefGoogle Scholar
  9. 9.
    D.Y. Qin, Y.L. Li, S.Y. Zhang, and L. Zhou, J. Alloy. Compd. 663, 581 (2016).CrossRefGoogle Scholar
  10. 10.
    S.K. Kar, A. Ghosh, N. Fulzele, and A. Bhattacharjee, Mater. Charact. 81, 37 (2013).CrossRefGoogle Scholar
  11. 11.
    S. Sadeghpour, S.M. Abbasi, M. Morakabati, and S. Bruschi, Mater. Des. 121, 24 (2017).CrossRefGoogle Scholar
  12. 12.
    C.W. Huang, Y.Q. Zhao, S.W. Xin, W. Zhou, Q. Li, and W.D. Zeng, J. Alloy. Compd. 693, 582 (2017).CrossRefGoogle Scholar
  13. 13.
    P. Manda, U. Chakkingal, and A.K. Singh, Mater. Today 2, 1118 (2015).CrossRefGoogle Scholar
  14. 14.
    M. Yan, M.S. Dargusch, T. Ebel, and M. Qian, Acta Mater. 68, 196 (2014).CrossRefGoogle Scholar
  15. 15.
    Y.F. Yang, S.D. Luo, G.B. Schaffer, and M. Qian, Mater. Sci. Eng. A 528, 6719 (2011).CrossRefGoogle Scholar
  16. 16.
    P.G. Esteban, E.M. Ruiz-Navas, and E. Gordo, Mater. Sci. Eng. A 527, 5664 (2010).CrossRefGoogle Scholar
  17. 17.
    B.Y. Chen, K.S. Hwang, and K.L. Ng, Mater. Sci. Eng. A 528, 4556 (2011).CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society 2018

Authors and Affiliations

  1. 1.School of Engineering, Waikato Centre for Advanced MaterialsUniversity of WaikatoHamiltonNew Zealand

Personalised recommendations