Abstract
Temperature sensitivity is greatly improved by taking the following three measures: proper long-period fiber grating (LPFG) whose strain coefficient of the core is larger than that of the cladding is employed, the LPFG is coated with a thin film of the material whose refractive index decreases with the temperature, and the sensor is encapsulated by metal material whose thermal expansion coefficient is large. By computer simulation, a measured temperature coefficient of 0.2375 nm/°C and a temperature resolution less than 0.1 °C are obtained.
Similar content being viewed by others
References
Vengasarkar A M, Lemaire P J, and Judkins J B, in: Tech Dig Conf Opt:Fiber Commun, San Diego C A. postdeadline paper, 1995: PD4–2
Kersey A D, Davie M A, and Patrick h J, J Lightwave Technolgy, 15 (1997), 1442.
Bhatia V, and Vengasarkar A M. Opt Lett, 21 (1996), 692.
Muguang Wang, Huai Wei, and Zhi Tong, Acta Optica Sinica, 22 (2002), 867.
Yunqi Liu, Chunfeng Ge, and Donghui Zhao, Acta Photonica Sinca. 28 (1999), 356.
Yage Zhan, Haiwen Cai, and Shiqing Xiang, Chinese Jouranal of Lasers.32 (2005), 83.
Yuanliang Liu. Study on Mode Field and Coupling based on Long-Period Fiber Bragg.Master Dissertation of University of Electronic Scince and Technology of China. May, (2005), 36.
Author information
Authors and Affiliations
Corresponding author
Additional information
This work is financially supported by the Innovation Project of Guangxi Graduate Education Foundation (No.200710602 0809M70).
Rights and permissions
About this article
Cite this article
Ruan, Ja., Zeng, Qk., Qin, Zx. et al. High-sensitivity temperature sensor based on long-period fiber grating. Optoelectron. Lett. 4, 114–116 (2008). https://doi.org/10.1007/s11801-008-7133-4
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11801-008-7133-4