Advertisement

Journal of Central South University

, Volume 18, Issue 5, pp 1719–1725 | Cite as

Flow characteristics by particle image velocimetry in liquefied natural gas vaporizer model with several baffles

  • H. S. Chung
  • S. M. Sayeed-Bin-Asad
  • Berkah Fajar
  • Y. H. Shin
  • H. M. JeongEmail author
Article

Abstract

Shell-and-tube vaporizers are the most commonly used and dominated types of vaporizers in liquefied natural gas (LNG) realm. Due to efficient performance, shell-side flow in this type of vaporizers has received considerable attention and has been investigated extensively. However, the detailed flow structure in the shell needs to be determined for reliable and effective design. Therefore, the objective of this study was to clarify the flow structure in shell by particle image velocimetry (PIV). Experiments were conducted using two types of model; 15% baffle cut having inlet and outlet positions in the direction of 90° to the cut and 30% baffle cut having inlet and outlet positions in the direction of 180° to the cut. Each test section is 169 mm in inner diameter and 344.6 mm in length. The flow features were characterized in different baffle cuts with regards to the velocity vector field and velocity distribution. The results show that the flow characteristics of 15% baffle cut type vaporizer are comparable to those of 30% baffle cut type vaporizer.

Key words

particle image velocimetry liquefied natural gas vaporizer vortex turbulence 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    LEE Y H, LEE S C, JEONG H M, CHUNG H S, Experimental study on the characteristics of longitudinal fin air heating vaporizers in different seasons [J]. Journal of Mechanical Science and Technology, 2008, 22: 981–990.CrossRefGoogle Scholar
  2. [2]
    AIBA S, TSUCHIDA H, OTA T. Heat transfer around tubes in in-line tube banks [J]. B JSME, 1982, 25: 919–926.CrossRefGoogle Scholar
  3. [3]
    IWAKI C, CHEONG K H, MONJI H, MATSUI G. PIV measurement of the vertical cross-flow structure over tube bundles [J]. Experiments in Fluids, 2004, 37: 350–363.CrossRefGoogle Scholar
  4. [4]
    ZDRAVKOVICH M M. Interstitial flow field and fluid forces [C]// Technology for the’ 90s. ASME, 1993: 595–658.Google Scholar
  5. [5]
    LORISCH W. Determination of heat transfer coefficients by a diffusion method [J]. VDI Mitteilungen Forchungsarbeit, 1929, 323: 46–68.Google Scholar
  6. [6]
    PENDENNIS-WALLIS R. Photographic study of fluid flow between banks of tubes [J]. Engineering (IMechE.), 1939, 147: 423–426.Google Scholar
  7. [7]
    BRADSHAW P. The effect of wind tunnel screens on nominally two-dimensional boundary layers [J]. J Fluid Mech, 1965, 22: 679–687.CrossRefGoogle Scholar
  8. [8]
    ZDRAVKOVICH M M. Smoke observation of wake of tandemcylinders [J]. Aeronaut J, 1972, 76: 108–114.Google Scholar
  9. [9]
    WEAVER D S, AVD-RABBO A. A flow visualization study of a square array of tubes in water cross flow [J]. J Fluid Eng-T ASME, 1985, 107: 354–363.CrossRefGoogle Scholar
  10. [10]
    SIMONIN O, BARCOUDA M. Measurements and prediction of turbulent flow entering a staggered tube bundle [C]// Proceedings of the 4th International Symposium on Applications of Laser Anemometry to Fluid Mechanics. Lisbon, Portugal, 1988: 143–150.Google Scholar
  11. [11]
    BALABANI S, YIANNESKIS M. Velocity characteristics of the cross flow over tube bundles [C]// Proceedings of the 7th International Symposium on Applications of Laser Anemometry to Fluid Mechanics. Lisbon, Portugal, 1994: 317–331.Google Scholar
  12. [12]
    UMEDA S, YANG W-J. Interaction of von Karman vortices and intersecting main streams in staggered tube bundles [J]. Exp Fluids, 1999, 26: 389–396.CrossRefGoogle Scholar
  13. [13]
    AIBA S, TSUCHIDA H, OTA T. Heat transfer around tubes in staggered tube banks [J]. B JSME, 1982, 25: 527–533.Google Scholar
  14. [14]
    JEONG H M, CHUNG H S. Fluid flow characteristics in the aquaculture tank for a breeding fish [J]. KSME International Journal, 1998, 18(12): 2265–2272, 2004.CrossRefGoogle Scholar

Copyright information

© Central South University Press and Springer-Verlag Berlin Heidelberg 2011

Authors and Affiliations

  • H. S. Chung
    • 1
  • S. M. Sayeed-Bin-Asad
    • 2
  • Berkah Fajar
    • 3
  • Y. H. Shin
    • 2
  • H. M. Jeong
    • 1
    Email author
  1. 1.Department of Mechanical and Precision EngineeringInstitute of Marine IndustryTongyeong, GyeongsangnamdoKorea
  2. 2.Department of Mechanical and Precision EngineeringGyeongsang National UniversityTongyeong, GyeongsangnamdoKorea
  3. 3.Department of Mechanical EngineeringUniversity of DiponegoroSemarangIndonesia

Personalised recommendations