Journal of Failure Analysis and Prevention

, Volume 17, Issue 6, pp 1288–1296 | Cite as

The Prediction of the Low Cycle Fatigue Life About the Coiled Tubing with Ovality and Wall Thickness

Technical Article---Peer-Reviewed
  • 82 Downloads

Abstract

With respect to conventional tubing with threaded connections, coiled tubing has the advantage of not screwing on and off in the lifting pipe string. It is widely used in drilling and repairing wells. Coiled tubing experiences 6 bend-straighten plastic deformations in each lifting pipe string. Low working life and high cost are the key technical issues for coiled tubing in downhole operations. Based on the work state of the coiled tubing, a dedicated experimental device for fatigue life and specimen is designed in this article. Fatigue life tests were carried out on \(2{\raise0.5ex\hbox{$\scriptstyle 3$} \kern-0.1em/\kern-0.15em \lower0.25ex\hbox{$\scriptstyle 8$}}^{{\prime \prime }}\) diameter tubes which are commonly used in industry. The experiments were carried out on the bending and straightening devices for the coiled tubing with the damage of ovality and reduction of wall thickness monitored. A large number of experimental data were obtained. The formulas for ovality and wall thickness with the cycle of bending–straightening were fitted based on mathematical regression method, and then the formulas for the low cycle fatigue life with damage of ovality and reduction of wall thickness are given for the coiled tubing. Comparing with the results of theoretical formula and laboratory experiments, the maximum error was 3.03%. Therefore, the calculation method will provide a theoretical basis for the coiled tubing failure prediction and control.

Keywords

Low cycle fatigue life Tubing Bending–straightening Ovality Wall thickness 

Notes

Acknowledgments

The research is supported by NSFC (Natural Science Foundation of China, Nos. 51490650, 51504067 and 51674088) and Postdoctoral foundation of Hei Long Jiang province (No. LBH-Z15031) and Young innovative talents of Hei Long Jiang province (UNPYSCT-2016123) in the context of northeast petroleum university.

References

  1. 1.
    H. He, Development of coiled tubing technique and equipment. China Pet. Mach. 34(1), 1–6 (2006)Google Scholar
  2. 2.
    H. Wang, X. Li, Application situation and thinking about coiled tubing techniques in downhole operation. Oil Drill. Prod. Technol. 6, 120–124 (2008)Google Scholar
  3. 3.
    G. Ren, H. Zhang, G. Fu, Recent advances in foreign coiled tubing unit. Oil Field Equip. 38(2), 97–99 (2009)Google Scholar
  4. 4.
    Y. Gao, L. Gang, Mechanics reseach of bending coiled tubing. Oil field Equip. 39(5), 10–13 (2010)Google Scholar
  5. 5.
    H. Dongsheng, X. Kebin, W. Guangsen, Mechanics analysis of coiled tubing operation in well renping. Oil Drill. Prod. Technol. 3, 61–65 (1999)Google Scholar
  6. 6.
    X. Gao, F. Shangguan, S. Song, The low-cycle fatigue testing equipment program analysis of coiled tubing. Oil Field Equip. 36(11), 63–67 (2007)Google Scholar
  7. 7.
    J. Wu, Coiled tubing working life prediction, SPE Production Operations Symposium, Doc. No. SPE29461 (1995), pp. 181–187Google Scholar
  8. 8.
    K.R. Newman, Determining the working life of a coiled tubing string. Offshore Inc. Oilman 51(12), 31–36 (1991)Google Scholar
  9. 9.
    S.M. Tipton, L.G. Neuharth, J.R. Sorem, Influence of prior cycling on fatigue damage caused by in coiled tubing. SPE 100199 (2006), pp. 414–416Google Scholar
  10. 10.
    M.G. Burns, K.P. Malloy, Grade p110 tubing shredded by downhole detonation. J Fail. Anal. Prev. 17, 38–42 (2017)CrossRefGoogle Scholar
  11. 11.
    Z. Xiaoping, Analysis of fatigue life of bending coiled tubing. Drill. Prod. Technol. 23(6), 51–53 (2000)Google Scholar
  12. 12.
    M.E. Stevenson, J.L. Mcdougall, M.E. Barkey, Stresses in bent copper tubing: application to fatigue and stress-corrosion cracking failure mechanisms. J. Fail. Anal. Prev. 5(6), 25–29 (2005)CrossRefGoogle Scholar
  13. 13.
    L. Zifeng, L. Xuejiao, W. Peng, Pre-bending coiled tubing and its fatigue life prediction. Acta Pet. Sin. 33(4), 706–710 (2012)Google Scholar
  14. 14.
    W. Haitao, L. Xiangfang, Prediction of low cycle fatigue life of curling coiled tubing. China Pet. Mach. 36(11), 25–31 (2008)Google Scholar
  15. 15.
    X. Li, K. Shi, Studying of fallure and fatigue life of coiled tubing. Inner Mongulia Petrochem. 20(6), 7–11 (2008)Google Scholar
  16. 16.
    T. Padron, B.H. Luft, E. Kee et al., Fatigue life of coiled tubing with external mechanical damage, Doc. No. SPE107113 (2007), pp. 379–394Google Scholar
  17. 17.
    M. Javidi, M. Saeedikhani, R. Omidi, Failure analysis of a gas well tubing due to corrosion: a case study. J. Fail. Anal. Prev. 12(5), 550–557 (2012)CrossRefGoogle Scholar

Copyright information

© ASM International 2017

Authors and Affiliations

  1. 1.Northeast Petroleum UniversityDaqingChina
  2. 2.Department of Aerospace Engineering and Engineering MechanicsUniversity of CincinnatiCincinnatiUSA

Personalised recommendations