Condition Assessment Study of A-286 Alloy Gas Turbine Wheel
- 119 Downloads
Life extension programs for rotating and nonrotating gas turbine components are popular and widely practiced in the industry. It is often possible to extend the life of the component beyond the design life through life assessment studies. The life assessment study generally includes a combination of nondestructive and destructive tests. Considering the life assessment approach, a Frame 5002 unit gas turbine wheel was examined nondestructively. The material of the turbine wheel is A-286, which is an iron-based super alloy. This turbine wheel has accumulated more than 200,000 service hours. The objective for nondestructive testing of this wheel was to check for any material degradation and any surface cracking in order to ensure extended service hours. The nondestructive tests included eddy current test, ultrasonic flaw detection, replica metallography, and portable hardness test. As such, no significant abnormalities were detected in the nondestructive tests performed. The replica metallography revealed excessive carbide precipitation. It was recommended to retire the turbine wheel from service. The significant test result findings of replica metallography are presented and discussed in this paper.
KeywordsCarbides Condition assessment Replica Microstructure Life extension Turbine wheel
The author thanks Mr. Thomas Doyle (Workshop Production Manager) and Ross Nicolson (Workshop Manager) for the extended support in replica metallography electropolishing technique and the encouragement for the required research work.
- 1.C.R. Prasad, K. Singh, Remaining life assessment (RLA) of gas based units—case studies. Trans. Indian Inst. Met. 63, 278–279 (2010)Google Scholar
- 2.B. Neubauer, U. Wedel, Advances in Life Prediction Methods (ASM International Conference, Albany, 1983), p. 307Google Scholar
- 3.H.H. Williams, Creep Damage Assessment by NDT. Proceedings of MRS Fall Meeting, Boston, 1988Google Scholar
- 4.R. Viswanathan, Damage Mechanisms and Life Assessment of High-Temperature Components (ASM International, Metals Park, 1989), p. 416Google Scholar
- 5.ASTM E1351-01, Standard Practice for Production and Evaluation of Field Metallographic Replicas. Annual Book of ASTM Standards 2010, 03.01, 2006, pp. 973–977Google Scholar
- 7.C. Bradley, Microstructural characterization and heat treatment of A286 turbine buckets. ETD Collection for University of Texas. El Paso, Paper AAI1468288, 2009Google Scholar
- 8.ASM Handbook (2004), Metallography and Microstructures, vol. 9 (ASM International, Metals Park, 2004), pp. 836–837Google Scholar
- 9.ASM Handbook, Failure Analysis and Prevention (ASM International, Metals Park, 2002), pp. 730–736Google Scholar
- 10.A.S. Kleinberg, R.L. Meltzer, J.R. Schroeder, B. Benzing, M.B. Vieth, K. Greene, M. Therese Pravitz, Creep and rupture tests of alloy A-286 at elevated temperatures. ASTM J. Test. Eval. 134(1) (1985)Google Scholar
- 13.J. Liburdi, P. Lowden, D. Nagy, T.R. De Priamus, S. Shaw, Practical experience with the development of superalloy rejuvenation. ASME Turbo Expo 2009. Power for Land, Sea, and Air. Paper No. GT2009-59444, 4, 819-827Google Scholar