Journal of Failure Analysis and Prevention

, Volume 16, Issue 1, pp 4–8 | Cite as

Extended Room-Temperature Creep Testing of Grade 2 CP Titanium Plate Using Notch Tensile Samples

Feature
  • 166 Downloads

Abstract

Commercially pure (CP) Titanium has a unique behavior in that creep can occur at room temperature. In addition, many materials exhibit an effect from a notch on mechanical properties. This paper shall review 2000-h room-temperature creep data generated using notched tensile bars from Grade 2 CP Titanium at loads which were between 30 and 50% of the notch yield strength. The results shall be compared to previously generated data (Dennies and Kupkovits in J Fail Anal Prev 14(4):437–442, 2014).

Keywords

CP Titanium Creep Room temperature Notch 

References

  1. 1.
    D.P. Dennies, R. Kupkovits, Room temperature creep testing of Grade 2 CP titanium plate using notch tensile samples. J. Fail. Anal. Prev. 14(4), 437–442 (2014)CrossRefGoogle Scholar
  2. 2.
    ASM, Specialty Handbook: Heat-Resistant Materials, Properties of Nonferrous Heat-Resistant Materials. ASM International, 1997, pp. 350–351 (Figure 4)Google Scholar
  3. 3.
    E. Sato, T. Yamada, H. Tanaka, I. Jimbo, Categorization of ambient-temperature creep behavior of metals. Mater. Trans. 47(4), 1121–1126 (2006)CrossRefGoogle Scholar
  4. 4.
    J. Peng, C. Zhou, Q. Dai, X. He, An improved constitutive description of tensile behavior for CP-Ti at ambient and intermediate temperatures. Mater. Des. 50, 968–976 (2013)CrossRefGoogle Scholar
  5. 5.
    D.P. Dennies, 2000 Hour Creep and Fatigue Crack Growth Test Results for Commercially Pure (CP) Titanium Plate, Exponent External Memo 1204732.000 R0T0 0113 DD28, dated 28 January 2013Google Scholar
  6. 6.
    ASTM F519-10, Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments, ASTM International, December 2010Google Scholar
  7. 7.
    Timet Lab Report #639021, TiMetal 50A, Heat #HN0601, dated 12 December 2011Google Scholar
  8. 8.
    ASM, Materials Properties Handbook: Titanium Alloys. Commercially Pure and Modified Ti, ASM International, 1994, p. 227Google Scholar
  9. 9.
    R.A. Kupkovits Thermomechanical Fatigue Behavior of the Directionally-Solidified Nickel-Base Superalloy CM247LC. M.S. Thesis. 2009, Georgia Institute of Technology, Atlanta, GA, USAGoogle Scholar

Copyright information

© ASM International 2016

Authors and Affiliations

  1. 1.Exponent Failure Analysis AssociatesIrvineUSA
  2. 2.Exponent Failure Analysis AssociatesAtlantaUSA

Personalised recommendations