Journal of Failure Analysis and Prevention

, Volume 14, Issue 2, pp 125–138 | Cite as

Experimental Investigation of Misalignment Effects on Rotor Shaft Vibration and on Stator Current Signature

  • Alok Kumar Verma
  • Somnath Sarangi
  • M. H. Kolekar
Feature

Abstract

Misalignment is one of the most common faults in any rotating machine. It can cause decrease in efficiency and in the long run may cause failure of machine. Most of the researchers, consider only vibration information for the misalignment. However, this paper inspects the different types of misalignments by using diagnostic medium such as stator current signature as well as rotor vibration signal and it is being found that current signature alone can predict the misalignment effect without use of vibration signal. Diagnostic features obtained by FFT related to misalignments have been explained. Orbit plots are effectively used to explain the unique nature of misalignment fault. In this study, shaft displacement and stator current samples during machine run up under aligned as well as misaligned conditions are measured and analyzed. Result shows that misalignment is the parameter that is more responsible for the cause of instability.

Keywords

Parallel misalignment Angular misalignment Fast Fourier transform Motor current signature analysis Fault diagnosis 

Notes

Acknowledgments

The authors would like to acknowledge the support provided by Indian Institute of Technology Patna for assistance with this work.

References

  1. 1.
    S.R. Bognatz, Alignment of critical and non critical machines. Orbit, 23–25 (1995)Google Scholar
  2. 2.
    J. Piotrowski, Shaft Alignment Handbook, 3rd edn. (CRC, New York, 2006)CrossRefGoogle Scholar
  3. 3.
    J.M. Bossio, G.R. Bossio, C.H. De Angelo, Angular misalignment in induction motor with flexible coupling. Proceedings of the IEEE IECON, Porto, Portugal, 3–7 November, 2009, pp. 1033–1038Google Scholar
  4. 4.
    C.B. Gibbons, Coupling misalignment forces. Proceedings of the 5th Turbo Machinery Symposium, Gas Turbine Laboratory, Texas A&M University, Texas, 1976, pp. 111–116Google Scholar
  5. 5.
    A.S. Sekhar, B.S. Prabhu, Effects of coupling misalignment on vibration of rotating machines. J. Sound Vib. 185, 655–671 (1995)CrossRefGoogle Scholar
  6. 6.
    B.S. Prabhu, An experimental investigation on the misalignment effects in journal bearings. Tribol. Trans. 40, 235–242 (1997)CrossRefGoogle Scholar
  7. 7.
    Y.S. Lee, C.W. Lee, Modeling and analysis of misaligned rotor–ball bearing systems. J. Sound Vib. 224, 17–32 (1999)CrossRefGoogle Scholar
  8. 8.
    D.L. Dewell, L.D. Mitchell, Detection of a misaligned disk coupling using spectrum analysis. J. Vib. Acoust. Stress Reliab. Des. 106, 9–16 (1984)CrossRefGoogle Scholar
  9. 9.
    K.M. Al-Hussain, I. Redmond, Dynamic response of two rotors connected by rigid mechanical coupling with parallel misalignment. J. Sound Vib. 249, 483–498 (2002)CrossRefGoogle Scholar
  10. 10.
    J. Wook Heo, J. Chung, K. Choi, Dynamic time responses of a flexible spinning disk misaligned with the axis of rotation. J. Sound Vib. 262, 25–44 (2003)CrossRefGoogle Scholar
  11. 11.
    J.R. Mancuso, C.B. Gibbons, R.E. Munyon, The application of flexible couplings for turbo machinery, Proceedings of the Eighth Turbo machinery Symposium, Gas Turbine Laboratories, Texas A & M University, 1990, pp. 141–164Google Scholar
  12. 12.
    J. Mancuso, General purpose vs. special purpose couplings. Proceedings of the Fifth Turbo machinery Symposium, Gas Turbine Laboratories, Texas A & M University, 1995, pp. 167–177Google Scholar
  13. 13.
    I. Redmond, Shaft misalignment and vibration-A model. Proceedings of the Society for Experimental Mechanics, 19–22 February, 2007Google Scholar
  14. 14.
    M. Saigo, Y. Okada, K. Ono, Self-excited vibration caused by internal friction in universal joints and its stabilizing method. J. Vib. Acoust. 119, 221–229 (1997)CrossRefGoogle Scholar
  15. 15.
    M. Xu, R.D. Marangoni, Vibration analysis of a motor flexible coupling-rotor system subject to misalignment and unbalance. Part I: experimental validation. J. Vib. Sound 176, 681–691 (1994)CrossRefGoogle Scholar
  16. 16.
    R.M. Rosenberg, On the dynamical behavior of rotating shafts driven by universal (Hooke) coupling. J. Appl. Mech. 25, 47–51 (1958)Google Scholar
  17. 17.
    S. Sarkar, A. Nandi, S. Neogy, J.K. Dutta, T.K. Kundra, Finite element analysis of misaligned rotors on oil-film bearings. Indian Acad. Sci. 35, 45–61 (2010)Google Scholar
  18. 18.
    V. Hariharan, P.S.S. Srinivasan, Vibration analysis of misaligned shaft–ball bearing system. Indian J. Sci. Technol. 2, 45–50 (2009)Google Scholar
  19. 19.
    T.H. Patel, A.K. Dapre, Experimental investigations on vibration response of misaligned rotor. J. Mech. Signal Process. 23, 2236–2252 (2009)CrossRefGoogle Scholar
  20. 20.
    T.H. Patel, A.K. Darpe, Vibration response of misaligned rotor. J. Sound Vib. 325, 609–628 (2009)CrossRefGoogle Scholar
  21. 21.
    R.R. Schoen, T.G. Habetler, F. Kamran, R.G. Bartheld, Motor bearing damage detection using stator current monitoring. IEEE Trans. Ind. Appl. 31, 1274–1279 (1995)CrossRefGoogle Scholar
  22. 22.
    A.K. Verma, S. Sarangi, M. Kolekar, S. Banerjee, Oil whip detection using stator current monitoring. IEEE Symposium on Computers and Informatics, Penang, Malaysia, 18–20 March, 2012, pp. 119–124Google Scholar
  23. 23.
    A.K. Verma, S. Sarangi, M. Kolekar, Shaft misalignment detection using stator current monitoring. Int. J. Adv. Comput. Res. 3, 305–309 (2013)Google Scholar

Copyright information

© ASM International 2014

Authors and Affiliations

  • Alok Kumar Verma
    • 1
  • Somnath Sarangi
    • 2
  • M. H. Kolekar
    • 1
  1. 1.Department of Electrical EngineeringIndian Institute of TechnologyPatnaIndia
  2. 2.Department of Mechanical EngineeringIndian Institute of TechnologyPatnaIndia

Personalised recommendations