Journal of Failure Analysis and Prevention

, Volume 9, Issue 1, pp 43–48 | Cite as

Failure Analysis of Cracked Gear Shafts

Case History

Abstract

Two gear shafts cracked during the fabrication. The cracks are through the grooves associated with the gear teeth and propagated completely across the shaft. Fractography on the cracked teeth indicates that the crack origins are about 3.5 to 4.0 mm from the groove and exhibit pointlike features. Fracture surfaces near the crack origin regions were intergranular, and the fracture appeared to have occurred instantaneously. Metallurgical analysis indicates that decarburization had occurred on the surfaces of the gear shafts, but occurrence of decarburization has no relation to the cracking. Cracking occurred during the carburization-quenching process and originated at a cluster of Al2O2 complex inclusions. The thermal stress produced by quenching drove the cracking process.

Keywords

Gear shaft Failure analysis Instantaneous cracking Inclusion clusters Decarburization 

References

  1. 1.
    Metals Handbook. Heat Treating, 9th edn., vol. 4. American Society for Metals, Metals Park, OH (1981)Google Scholar
  2. 2.
    Determination of carburized depth and metallurgic examination of carburizing structure, China Standard. GB9450 (1994) (in Chinese)Google Scholar
  3. 3.
    Brooks, C.R., Choudhury, A.: Failure Analysis of Engineering Materials. McGraw-Hill, New York (2002)Google Scholar
  4. 4.
    Metal Handbook. Fractography and Atlas of Fractographs, 8th edn., vol. 9. American Society for Metals, Metal Park, OH (1974)Google Scholar
  5. 5.
    ASM Handbook. Failure Analysis and Prevention, 10th edn., vol. 11. ASM International, Materials Park, OH (1993)Google Scholar
  6. 6.
    Fernandes, P.J.L.: Tooth bending fatigue failure in gears. Eng. Fail. Anal. 3, 219–225 (1996)CrossRefGoogle Scholar
  7. 7.
    Clegg, R.E.: Failure of planetary pinions in earth moving equipment—a failure analysis approach. Eng. Fail. Anal. 7, 35–41 (2000)CrossRefGoogle Scholar

Copyright information

© ASM International 2008

Authors and Affiliations

  1. 1.Electromechanics and Material Engineering CollegeDalian Maritime UniversityDalianP.R. China

Personalised recommendations