Advertisement

Study of the Effects of Materials Selection for the Closeout Structure on the Service Life of a Liquid Rocket Engine Thrust Chamber

  • M. FerraiuoloEmail author
  • A. Riccio
Article

Abstract

The external structure of rocket engines thrust chambers for aerospace applications should be designed in order to provide adequate stiffness to the thrust chamber; however, it affects in a significant way the engine service life since it acts as a structural bound for the internal structure which is subjected to very high temperature values. The adoption of thin closeout structures allows to have lighter structures and to significantly increase the service life of the thrust chamber. The aim of the present work is to perform numerical investigations on the influence of the closeout geometry and materials on the number of cycles to failure of the thrust chamber. Furthermore, a study on the impact of creep phenomenon on the service life is illustrated. In particular, the present paper is focused on the thermomechanical study of the closeout structure, in terms of material choice, thickness, joining process with the inner liner, etc. Transient thermal and static structural nonlinear analyses are conducted by means of a commercial finite element code (ANSYS), in order to evaluate the number of cycles to failure for the investigated configurations. Viscoplastic models are adopted in order to simulate the highly nonlinear and rate-dependent phenomena occurring in the inner liner structure.

Keywords

regenerative cooling service life thermal ratcheting thrust chamber 

Notes

Acknowledgments

This research has been supported by the Italian Ministry of University and Research (MIUR), in the frame of the Hyprob project.

References

  1. 1.
    V. Salvatore et al., Design and Development of a LOX/LCH4 Technology Demonstrator, in 48th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 30 July-01 August, Atlanta, Georgia (2012)Google Scholar
  2. 2.
    D. Haeseler et al., Green Propellant Propulsion Concepts for Space Transportation and Technology development Needs, in ESA SP-557, Proceedings of the 2nd International Conference on Green Propellants for Space Propulsion, 7-8 June, Cagliari, Sardinia, Italy (2004)Google Scholar
  3. 3.
    D. Haeseler, C. Mading, A. Gotz, V. Roubinski, S. Khrissanfov, and V. Berejnoy, Recent Developments for Future Launch Vehicle LOX/HC Rocket Engines, in 6th International Symposium Propulsion for Space Transportation of the XXIst Century, AAAF-02-100, 13-17 May, Versailles, France (2002)Google Scholar
  4. 4.
    J. Collins, E. Hurlbert, K. Romig, J. Melcher, A. Hobson, and P. Eaton, Sea-Level Flight Demonstration & Altitude Characterization of a LO2/LCH4 Based Ascent Propulsion Lander, AIAA paper 2009-4948 (2009)Google Scholar
  5. 5.
    F. Battista et al., Development of a LOX/LCH4 Technology Demonstrator Based on Regenerative Cooling Throughout Validation of Critical Design Aspects with Breadboards in the Framework of the Hyprob Program, in 63rd International Astronautical Congress, IAC-2012, Naples, Italy (2012)Google Scholar
  6. 6.
    C.D. Brown, Conceptual Investigations for a Methane-Fueled Expander Rocket Engine, AIAA paper 2004-4210 (2004)Google Scholar
  7. 7.
    ECOSIMPRO User’s Guide, EA Internacional, Magallanes, Madrid, SpainGoogle Scholar
  8. 8.
    G.P. Sutton and O. Biblarz, Rocket Propulsion Elements, Wiley, New York, 2010, ISBN 9780470080245Google Scholar
  9. 9.
    D.K. Huzel and D.H. Huang, Modern Engineering for Design of Liquid-Propellant Rocket Engines, Vol 147, AIAA, Boston, 1992Google Scholar
  10. 10.
    W.H. Amstrong, Structural Analysis of Cylindrical Thrust Chambers, vol. 1. NASA technical report, 01 March 1979Google Scholar
  11. 11.
    H.I. Immich, J. Alting, J. Kretschmer, and D. Preclik, Technology Developments for Thrust Chambers of Future Launch Vehicle Liquid Rocket Engines, Acta Astronaut., 2003, 53, p 597–605CrossRefGoogle Scholar
  12. 12.
    H.C. de Groh III and D.L. Ellis, Comparison of GRCop-84 to Other High Thermal Conductive Cu Alloys, NASA/TM—2007-214663 (2007)Google Scholar
  13. 13.
    G.A. Malone et al., Improved Electroformed Structural Copper and Copper Alloys, NASA/CR1998-208680Google Scholar
  14. 14.
    E. Kirner, D. Thelemann, and D. Wolf, Development Status of the Vulcain Thrust Chamber, Acta Astronaut., 1993, 29(4), p 271–282 ((ISSN 0094-5765))CrossRefGoogle Scholar
  15. 15.
    O. Knab et al., Advanced Cooling Circuit Layout for the VINCI Expander Cycle Thrust Chamber, AIAA 2002-4005Google Scholar
  16. 16.
    H.J. Kasper and J.J. Notardonato, Effect of Low-Stiffness Closeout Overwrap on Rocket Thrust-Chamber Life, NASA technical paper 1456, May 1979Google Scholar
  17. 17.
    M. Ferraiuolo, W. Petrillo, and A. Riccio, On the Thermo-Structural Response of a Composite Closeout in a Regeneratively Cooled Thrust Chamber, Aerosp. Sci. Technol., 2017, 71, p 402–411CrossRefGoogle Scholar
  18. 18.
    G. Henson, Chapter 7: Materials for Launch Vehicle Structures, 20170001809Google Scholar
  19. 19.
    J.R. Riccius, O.J. Haidn, and E.B. Zametaev, Influence of Time Dependent Effects on the Estimated Life Time of Liquid Rocket Combustion Chamber Walls, in AIAA 2004-3670, 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, July 2004, Fort Lauderdale, FloridaGoogle Scholar
  20. 20.
    R.G. Thiede, J.R. Riccius, and S. Reese, Life Prediction of Rocket Combustion-Chamber-Type Thermomechanical Fatigue Panels, J. Propuls. Power, 2017, 33(6), p 1529–1542CrossRefGoogle Scholar
  21. 21.
    N. Ozisik, Heat Conduction, Wiley, New York, 1980,  https://doi.org/10.1002/aic.690260528 Google Scholar
  22. 22.
    B.A. Boley and J.H. Weiner, Theory of Thermal Stresses, Dover Publications, New York, 1960Google Scholar
  23. 23.
    O. Golan et al., The Applicability of Norton’s Creep Power Law and Its Modified Version to a Single-Crystal Superalloy Type CMSX-2, Mater. Sci. Eng. A, 1996, 216(1–2), p 125–130 ((ISSN 0921-5093))CrossRefGoogle Scholar
  24. 24.
    V.K. Arya and S.M. Arnold, Viscoplastic Analysis of an Experimental Cylindrical Thrust Chamber Liner, AIAA J., 1992, 30(3), p 781–789CrossRefGoogle Scholar
  25. 25.
    J.R. Riccius, M.R. Hilsenbeck, and O.J. Haidn, Optimization of Geometric Parameters of Cryogenic Liquid Rocket Combustion Chambers, in 37th AIAA/ASME/SAE/ASEE JPC, AIAA-01-3408 (2001)Google Scholar
  26. 26.
    J.F. Maire and J.L. Chaboche, A New Formulation of Continuum Damage Mechanics (CDM) for Composite Materials, Aerosp. Sci. Technol., 1997, 1(4), p 247–257CrossRefGoogle Scholar
  27. 27.
    M. Ferraiuolo, V. Russo, and K. Vafai, A Comparative Study of Refined and Simplified Thermo-Viscoplastic Modeling of a Thrust Chamber with Regenerative Cooling, Int. Commun. Heat Mass Transf., 2016, 78, p 155–162CrossRefGoogle Scholar
  28. 28.
    J.C. Simo and T.J.R. Hughes, Computational Inelasticity, Springer, Berlin, 1998, ISBN 978-0-387-22763-4Google Scholar
  29. 29.
    R. Hetnarski and M. Eslami, Thermal Stresses: Advanced Theory and Applications, Springer, Dordrecht, 2009, ISBN 978-1-4020-9246-6Google Scholar
  30. 30.
    E. Thornton, Thermal Structures for Aerospace Applications, AIAA Educ. Ser., 1996,  https://doi.org/10.2514/4.862540 Google Scholar
  31. 31.
    D. Cardillo et al., Numerical Simulation of a Lo2-Ch4 Rocket Engine Demonstrator, in 65th International Astronautical Congress, at Toronto, Canada Google Scholar
  32. 32.
    J.J. Esposito and R.F. Zabora, Thrust Chamber Life Prediction: Mechanical and Physical Properties of High Performance Rocket Nozzle Materials, NASACR-134806, Contract NAS3-17838 (NASA-Lewis Research Center, Cleveland, 1975)Google Scholar
  33. 33.
    J.S. Porowski, W.J. O’Donnell, M.L. Badlani, and B. Kasraie, Simplified Design and Life Prediction of Rocket Thrust Chambers, J. Spacecr. Rockets, 1985, 22(2), p 181–187CrossRefGoogle Scholar

Copyright information

© ASM International 2019

Authors and Affiliations

  1. 1.Structures and Materials DepartmentItalian Aerospace Research Center (CIRA)CapuaItaly
  2. 2.Department of Industrial and Information EngineeringUniversità degli studi della Campania “Luigi Vanvitelli”AversaItaly

Personalised recommendations