Advertisement

Metallurgical and Materials Transactions B

, Volume 49, Issue 4, pp 1644–1657 | Cite as

Three-Dimensional Flow Behavior Inside the Submerged Entry Nozzle

  • Cesar Augusto Real-Ramirez
  • Ignacio Carvajal-Mariscal
  • Florencio Sanchez-Silva
  • Francisco Cervantes-de-la-Torre
  • Jesus Diaz-Montes
  • Jesus Gonzalez-Trejo
Article

Abstract

According to various authors, the surface quality of steel depends on the dynamic conditions that occur within the continuous casting mold’s upper region. The meniscus, found in that upper region, is where the solidification process begins. The liquid steel is distributed into the mold through a submerged entry nozzle (SEN). In this paper, the dynamic behavior inside the SEN is analyzed by means of physical experiments and numerical simulations. The particle imaging velocimetry technique was used to obtain the vector field in different planes and three-dimensional flow patterns inside the SEN volume. Moreover, large eddy simulation was performed, and the turbulence model results were used to understand the nonlinear flow pattern inside the SEN. Using scaled physical and numerical models, quasi-periodic behavior was observed due to the interaction of two three-dimensional vortices that move inside the SEN lower region located between the exit ports of the nozzle.

Notes

Acknowledgments

C. A. Real-Ramirez, F. Sanchez-Silva, I. Carvajal-Mariscal, and J. Gonzalez-Trejo thank the SNI for the distinction granted and the stipend received. I. Carvajal-Mariscal thanks IPN and UAM for the sabbatical year. The physical experiments were developed in the Laboratorio de Ingeniería Térmica e Hidráulica Aplicada (LABINTHAP) SEPI-ESIME at the Instituto Politécnico Nacional. The numerical simulations were developed in the Laboratorio de Cómputo y Visualización Científica at Universidad Autónoma Metropolitana. The authors thank the anonymous reviewers who pointed out important aspects of this research.

Funding

This study was funded by the Instituto Politécnico Nacional, the Universidad Autónoma Metropolitana, and the Consejo Nacional de Ciencia y Tecnología.

Supplementary material

Supplementary material 1 (MP4 13330 kb)

References

  1. 1.
    D.J. Branagan, J.G. Grant, A.T. Ball, J.K. Walleser, B.E. Meacham, K. Clark, L. Ma, I. Yakubtsov, S. Larish, S. Cheng, T.L. Giddens, A.E. Frerichs, and A.V. Sergueeva: U.S. Patent 20150152534A1, The NanoSteel Company Inc., United States, 2015, pp. 1–73.Google Scholar
  2. 2.
    G. Nitzl and H. Haslinger: U.S. Patent 8758672B2, Refractory Intellectual Property GMBH & CO. KG, Vienna, AT, 2014, pp. 1–18.Google Scholar
  3. 3.
    R.C. Hanna and K.J. Teeter: U.S. Patent 8616264B2, Nucor Corporation, 2014, pp 1–17.Google Scholar
  4. 4.
    Z. Q. Liu, B. K. Li, M. F. Jiang and F. Tsukihashi, ISIJ Int 2013, vol. 53, pp. 484-92.CrossRefGoogle Scholar
  5. 5.
    X. W. Zhang, X. L. Jin, Y. Wang, K. Deng and Z. M. Ren, ISIJ Int 2011, vol. 51, pp. 581-587.CrossRefGoogle Scholar
  6. 6.
    R. Chaudhary, G. G. Lee, B. G. Thomas and S. H. Kim, Metall Mater Trans B 2008, vol. 39, pp. 870-884.CrossRefGoogle Scholar
  7. 7.
    B. Zhao, B.G. Thomas, S.P. Vanka, and R.J. O’Malley, Metall. Mater. Trans. B, 2005, vol. 36B, pp. 801–823.CrossRefGoogle Scholar
  8. 8.
    K. C. Mills, Metall. Ital., 2017, vol. 15, pp. 38-45.Google Scholar
  9. 9.
    M. Iguchi, J. Yoshida, T. Shimizu and Y. Mizuno, ISIJ Int 2000, vol. 40, pp. 685-691.CrossRefGoogle Scholar
  10. 10.
    P. Zhao, Q. Li, S. B. Kuang and Z. S. Zou, Metall Mater Trans B 2017, vol. 48, pp. 456-470.CrossRefGoogle Scholar
  11. 11.
    A. Asad, C. Kratzsch and R. Schwarze, Steel Res. Int. 2016, vol. 87, pp. 181-190.CrossRefGoogle Scholar
  12. 12.
    Z. Liu, B. Li and M. Jiang, Metall Mat Trans B Process Metall Mat Process Sci 2014, vol. 45, pp. 675-697.CrossRefGoogle Scholar
  13. 13.
    S. M. Cho, B. G. Thomas and S. H. Kim, Metall Mater Trans B 2016, vol. 47, pp. 3080-3098.CrossRefGoogle Scholar
  14. 14.
    B. G. Thomas, Q. Yuan, S. Mahmood, R. Liu and R. Chaudhary, Metall Mater Trans B 2014, vol. 45, pp. 22-35.CrossRefGoogle Scholar
  15. 15.
    M. Xu and M. Zhu, ISIJ Int 2015, vol. 55, pp. 791-798.CrossRefGoogle Scholar
  16. 16.
    M.H. Zarea, A.H. Meysami, S.H. Mahmoudi, M. Hajisafari, M.M. Atabaki, Orient. J. Chem., 2013, vol. 29, pp. 1325-1337.CrossRefGoogle Scholar
  17. 17.
    Y. Chen, L. Zhang, S. Yang and J. Li, JOM 2012, vol. 64, pp. 1080-1086.CrossRefGoogle Scholar
  18. 18.
    H. Sun and J. Zhang, ISIJ Int 2011, vol. 51, pp. 1657-1663.CrossRefGoogle Scholar
  19. 19.
    M. M. Yavuz, Steel Res. Int. 2011, vol. 82, pp. 809-818.CrossRefGoogle Scholar
  20. 20.
    X. Deng, C. Ji, Y. Cui, L. Li, X. Yin, Y. Yang and A. McLean, Ironmak Steelmak 2017, vol. 44, pp. 461-471.CrossRefGoogle Scholar
  21. 21.
    Q. Fang, H. W. Ni, H. Zhang, B. Wang and Z. A. Lv, Metals-Basel 2017, vol. 7, pp. 1-16.Google Scholar
  22. 22.
    D. Gupta and A. K. Lahiri, Metall Mater Trans B 1996, vol. 27, pp. 757-764.CrossRefGoogle Scholar
  23. 23.
    Z. Q. Liu, B. K. Li, M. F. Jiang and F. Tsukihashi, ISIJ Int 2014, vol. 54, pp. 1314-1323.CrossRefGoogle Scholar
  24. 24.
    S. Pirker, D. Kahrimanovic and S. Schneiderbauer, Metall Mater Trans B 2015, vol. 46, pp. 953-960.CrossRefGoogle Scholar
  25. 25.
    J. L. Shen, D. F. Chen, X. Xie, L. L. Zhang, Z. H. Dong, M. J. Long and X. B. Ruan, Ironmak Steelmak 2013, vol. 40, pp. 263-275.CrossRefGoogle Scholar
  26. 26.
    Z. Wang, K. Mukai and D. Izu, ISIJ Int 1999, vol. 39, pp. 154-163.CrossRefGoogle Scholar
  27. 27.
    B. Greis, R. Bahrmann, A. Rückert and H. Pfeifer, Steel Res. Int. 2015, vol. 86, pp. 1469-1479.CrossRefGoogle Scholar
  28. 28.
    M. Javurek, M. Thumfart and R. Wincor, Steel Res. Int. 2010, vol. 81, pp. 668-674.CrossRefGoogle Scholar
  29. 29.
    Y. J. Jeon, H. J. Sung and S. Lee, Metall Mat Trans B Process Metall Mat Process Sci 2010, vol. 41, pp. 121-130.CrossRefGoogle Scholar
  30. 30.
    V. Singh and S. K. Das, ISIJ Int 2016, vol. 56, pp. 1509-1518.CrossRefGoogle Scholar
  31. 31.
    B. G. Thomas, Metall Mater Trans B 2002, vol. 33, pp. 795-812.CrossRefGoogle Scholar
  32. 32.
    Q. Yuan, S. Sivaramakrishnan, S. P. Vanka and B. G. Thomas, Metall Mater Trans B 2004, vol. 35, pp. 967-982.CrossRefGoogle Scholar
  33. 33.
    R. Kalter, M. J. Tummers, S. Kenjeres, B. W. Righolt and C. R. Kleijn, Int J Heat Fluid Fl 2013, vol. 44, pp. 365-374.CrossRefGoogle Scholar
  34. 34.
    R. Miranda, M. A. Barron, J. Barreto, L. Hoyos and J. Gonzalez, ISIJ Int 2005, vol. 45, pp. 1626-1635.CrossRefGoogle Scholar
  35. 35.
    C. Real, L. Hoyos, F. Cervantes, R. Miranda, M. Palomar-Pardavé, and J. Gonzalez: XVI Congreso sobre métodos numéricos y sus aplicaciones, Córdoba, 2007, pp. 302–17.Google Scholar
  36. 36.
    C. Real, R. Miranda, C. Vilchis, M. Barron, L. Hoyos and J. Gonzalez, ISIJ Int 2006, vol. 46, pp. 1183-1191.CrossRefGoogle Scholar
  37. 37.
    R. Miranda, M. Barron, A. de Ita, L. Hoyos, and J. Gonzalez: IEEE Industry Applications Society, 2004, pp. 200–207.Google Scholar
  38. 38.
    F. Rivera-Perez, C. Real-Ramirez, R. Miranda-Tello, R. Hernandez-Santoyo, F. Cervantes-De La Torre and J. Gonzalez-Trejo, Math. Probl. Eng. 2014, vol. 2014, pp. 1-12.CrossRefGoogle Scholar
  39. 39.
    X. Jin, D. F. Chen, X. Xie, J. L. Shen and M. J. Long, Steel Res. Int. 2013, vol. 84, pp. 31-39.CrossRefGoogle Scholar
  40. 40.
    H. Y. Hwang and G. A. Irons, Metall Mater Trans B 2012, vol. 43, pp. 302-315.CrossRefGoogle Scholar
  41. 41.
    X. H. Mao, J. S. Li and X. C. Lin, Adv Mater Res-Switz 2011, vol. 287-290, pp. 2735-2738.CrossRefGoogle Scholar
  42. 42.
    X. Jin, D. F. Chen, D. J. Zhang, X. Xie and Y. Y. Bi, Ironmak Steelmak 2011, vol. 38, pp. 155-159.CrossRefGoogle Scholar
  43. 43.
    F. Sánchez, R. Miranda-Tello, C. Real-Ramírez, L. Hoyos, M. Ramírez, and J. González-Trejo: 2010 7th IEEE Electronics, Robotics and Automotive Mechanics Conference, CERMA 2010, Cuernavaca, 2010, pp. 355–59.Google Scholar
  44. 44.
    B. Z. Shen, H. F. Shen and B. C. Liu, Ironmak Steelmak 2009, vol. 36, pp. 33-38.CrossRefGoogle Scholar
  45. 45.
    Y. Tsukaguchi, O. Nakamura, P. Jonsson, S. Yokoya, T. Tanaka and S. Hara, ISIJ Int 2007, vol. 47, pp. 1436-1443.CrossRefGoogle Scholar
  46. 46.
    R. Koitzsch, H. J. Odenthal and H. Pfeifer, Steel Res. Int. 2007, vol. 78, pp. 473-481.CrossRefGoogle Scholar
  47. 47.
    L. Hallgren, S. Takagi, R. Eriksson, S. Yokoya, and P. Jonsson: Sohn International Symposium Advanced Processing of Metals and Materials, 2006, vol. 2, pp. 471–84.Google Scholar
  48. 48.
    S. Yokoya, S. Takagi, Y. Kudou, Y. Sasaki and M. Iguchi, Tetsu to Hagane 2004, vol. 90, pp. 317-21.CrossRefGoogle Scholar
  49. 49.
    B. K. Li and D. H. Li, Acta Metall Sin 2002, vol. 38, pp. 315-320.Google Scholar
  50. 50.
    I. Lemanowicz, R. Gorissen, H. J. Odenthal and H. Pfeifer, Stahl Eisen 2000, vol. 120, pp. 85-93.Google Scholar
  51. 51.
    D. Xu, W.K. Jones Jr., and J.W. Evans: Proceedings of the 1998 TMS Annual Meeting, Minerals, Metals & Materials Soc (TMS), Warrendale, PA, 1998, pp. 3–14.Google Scholar
  52. 52.
    M. Burty, M. Larrecq, C. Pusse and Y. Zbaczyniak, Rev Metall-Paris 1996, vol. 93, pp. 1249-1255.CrossRefGoogle Scholar
  53. 53.
    D. E. Hershey, B. G. Thomas and F. M. Najjar, Int J Numer Meth Fl 1993, vol. 17, pp. 23-47.CrossRefGoogle Scholar
  54. 54.
    R.I.L. Guthrie: Engineering in Process Metallurgy, Oxford University Press, Oxford, 1992, pp. 510-520.Google Scholar
  55. 55.
    D. Gupta and A. K. Lahiri, Metall Mater Trans B 1994, vol. 25, pp. 227-233.CrossRefGoogle Scholar
  56. 56.
    D. Gupta and A. K. Lahiri, Metall Mater Trans B 1996, vol. 27, pp. 695-697.CrossRefGoogle Scholar
  57. 57.
    DynamicStudio User’s Guide. (Dantec Dynamics, Skovlunde, Denmark, 2013), pp. 17-25.Google Scholar
  58. 58.
    Fluent Inc: Fluent User’s Guide. Fluent Inc, Lebanon, 2007, p. 1864.Google Scholar
  59. 59.
    G.N. Abramovich: The theory of turbulent jets. 1st ed., MIT Press, Cambridge, 1963, p. 720.Google Scholar
  60. 60.
    Q. Yuan, B. G. Thomas and S. P. Vanka, Metall Mater Trans B 2004, vol. 35, pp. 685-702.CrossRefGoogle Scholar
  61. 61.
    L. F. Zhang, S. B. Yang, K. K. Cai, J. Y. Li, X. G. Wan and B. G. Thomas, Metall Mater Trans B 2007, vol. 38, pp. 63-83.CrossRefGoogle Scholar
  62. 62.
    K. C. Mills, P. Ramirez-Lopez, P. D. Lee, B. Santillana, B. G. Thomas and R. Morales, Ironmak Steelmak 2014, vol. 41, pp. 242-249.CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society and ASM International 2018

Authors and Affiliations

  • Cesar Augusto Real-Ramirez
    • 1
  • Ignacio Carvajal-Mariscal
    • 2
  • Florencio Sanchez-Silva
    • 2
  • Francisco Cervantes-de-la-Torre
    • 1
  • Jesus Diaz-Montes
    • 2
  • Jesus Gonzalez-Trejo
    • 1
  1. 1.Universidad Autonoma MetropolitanaMexico CityMexico
  2. 2.Instituto Politecnico Nacional, ESIME, UPALMMexico CityMexico

Personalised recommendations