Advertisement

Central Band Structures: New Insights into the Coupling Effects Between the Pores and Minerals of Sinter

  • Yaozu Wang
  • Zhengjian LiuEmail author
  • Jianliang Zhang
  • Chengbo Du
  • Lele Niu
Communication
  • 19 Downloads

Abstract

It is important to elucidate the coupling effects that exist between the pores and minerals of sinter to establish the relationships that exist among the technological parameters, microstructures, and performance of the sinter. Based on the formation mechanism of the pores within sinter, four types of central band structures (CBSs) were defined to represent the microstructures of the sinter. During reduction, the cracking behavior of each CBS was studied through a series of experiments conducted at a temperature of 873 K.

Notes

The authors acknowledge the financial support of the Supported by National Key R&D Program of China (2017YFB0304300). Yaozu Wang gratefully acknowledges financial support from China Scholarship Council for one year study at the Montanuniversitaet Leoben, Austria.

References

  1. 1.
    W. Chen and X.H. Wang: Nature, 2000, vol. 404, pp. 168–171.CrossRefGoogle Scholar
  2. 2.
    E.A. Olevsky, V. Tikare and T. Garino: J Am Ceram Soc., 2006, vol. 89, pp. 1914-1922.CrossRefGoogle Scholar
  3. 3.
    E.O. Olakanmi, R.F. Cochrane and K.W. Dalgarno: Prog Mater Sci., 2015, vol. 74, pp. 401-477.CrossRefGoogle Scholar
  4. 4.
    Y.Z. Wang, J.L. Zhang, Z.J. Liu and C.B. Du: JOM, 2017, vol. 69, pp. 2404-2411.CrossRefGoogle Scholar
  5. 5.
    Y.Z. Wang, J.L. Zhang, Z.J. Liu, Y.P. Zhang, D.H. Liu and Y.R. Liu: Int J Min Met Mater, 2017, vol. 24, pp. 1087-1095.CrossRefGoogle Scholar
  6. 6.
    J. Mitterlehner, G. Loeffler, F. Winter, H. Hofbauer, H. Schmid, E. Zwittag, T.H. Buergler, O. Pammer and H. Stiasny. ISIJ Int, 2004, vol. 44, pp. 11-20.CrossRefGoogle Scholar
  7. 7.
    L. Davis: ISIJ Int, 1999, vol. 39, pp. 239-245.CrossRefGoogle Scholar
  8. 8.
    D. Fernández-González, I. Ruiz-Bustinza, J. Mochón, C. González-Gasca and L. F.Verdeja: Min Proc Ext Met Rev., 2017, vol. 38, pp: 254-264.CrossRefGoogle Scholar
  9. 9.
    S.C. Panigrahy, P. Verstraeten and J. Dilewijns: MMTB, 1984, vol. 15, pp: 23-32.CrossRefGoogle Scholar
  10. 10.
    N.A.S. Webster, M.I. Pownceby, I.C. Madsen, A.J. Studer, J.R. Manuel and J.A. Kimpton: MMTB, 2014, vol. 45, pp. 2097-2105.CrossRefGoogle Scholar
  11. 11.
    N.V.Y. Scarlett, M.I. Pownceby, I.C. Madsen and A.N. Christensen: MMTB, 2004, vol. 35, pp. 929-936.CrossRefGoogle Scholar
  12. 12.
    M. Sinha and R. V. Ramna: ISIJ Int., 2009, vol. 49, pp. 719-721.CrossRefGoogle Scholar
  13. 13.
    T. Umadevi, K. Neson, P.C. Mahapatra, M. Prabhu and M. Ranjan: J Iron Steel Res Int., 2009, vol. 36, pp. 515-520.CrossRefGoogle Scholar
  14. 14.
    T. Umadevi, A.V. Deodar, and P.C. Mahapatra, M. Prabhu and M. Ranjan: Steel Res. Int. 2009, vol. 80, pp. 686-692.Google Scholar
  15. 15.
    R.P. Bhagat, U.S. Chattoraj and S.K. Sil: ISIJ Int., 2006, vol. 46, pp. 1728-1730.CrossRefGoogle Scholar
  16. 16.
    N.J. Bristow and C.E. Loo: ISIJ Int., 1992, vol. 32, pp. 819-828.CrossRefGoogle Scholar
  17. 17.
    T. Maeda and Y. Ono: Tetsu-to-Hagané, 1991, vol. 77, pp. 1569-1576.CrossRefGoogle Scholar
  18. 18.
    Y.H. Yang and N. Standish: ISIJ Int., 1991, vol. 31, pp. 468-477.CrossRefGoogle Scholar
  19. 19.
    Y. Z. Wang, J.L. Zhang, Z. J. Liu and C.B. Du: JOM, 2017, vol. 69, pp. 2397-2403.CrossRefGoogle Scholar
  20. 20.
    Y.H. Yang and N. Standish: ISIJ Int., 1990, vol. 31, pp. 1395-1401.Google Scholar
  21. 21.
    S.P.E. Forsmo, A.J. Apelqvist, B.M.T. Björkman and P.O. Samskog: Powder Technology, 2006, vol. 169, pp. 147-158.CrossRefGoogle Scholar
  22. 22.
    H.P. Pimenta, and V. Seshadri: Ironmaking & steelmaking, 2002, vol. 29. pp. 169-174.CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society and ASM International 2019

Authors and Affiliations

  • Yaozu Wang
    • 1
  • Zhengjian Liu
    • 1
    Email author
  • Jianliang Zhang
    • 1
  • Chengbo Du
    • 1
  • Lele Niu
    • 1
  1. 1.School of Metallurgical and Ecological EngineeringUniversity of Science and Technology BeijingBeijingP.R. China

Personalised recommendations